+40
−0
+14
−0
+58
−10
Loading
Gitlab 现已全面支持 git over ssh 与 git over https。通过 HTTPS 访问请配置带有 read_repository / write_repository 权限的 Personal access token。通过 SSH 端口访问请使用 22 端口或 13389 端口。如果使用CAS注册了账户但不知道密码,可以自行至设置中更改;如有其他问题,请发邮件至 service@cra.moe 寻求协助。
First off, some cpufreq drivers (eg. intel_pstate) can pass hints beyond the current target frequency to the hardware and there are no provisions for doing that in the cpufreq framework. In particular, today the driver has to assume that it should not allow the frequency to fall below the one requested by the governor (or the required capacity may not be provided) which may not be the case and which may lead to excessive energy usage in some scenarios. Second, the hints passed by these drivers to the hardware need not be in terms of the frequency, so representing the utilization numbers coming from the scheduler as frequency before passing them to those drivers is not really useful. Address the two points above by adding a special-purpose replacement for the ->fast_switch callback, called ->adjust_perf, allowing the governor to pass abstract performance level (rather than frequency) values for the minimum (required) and target (desired) performance along with the CPU capacity to compare them to. Also update the schedutil governor to use the new callback instead of ->fast_switch if present and if the utilization mertics are frequency-invariant (that is requisite for the direct mapping between the utilization and the CPU performance levels to be a reasonable approximation). Signed-off-by:Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by:
Viresh Kumar <viresh.kumar@linaro.org>
CRA Git | Maintained and supported by SUSTech CRA and CCSE