Merge tag 'at91-ab-4.14-dt2' of... (e3e36ab3) · Commits · 戴 / test

arch/arm/boot/dts/Makefile

+1 −0

Original line number	Diff line number	Diff line
		@@ -46,6 +46,7 @@ dtb-$(CONFIG_SOC_AT91SAM9) += \
		at91sam9x35ek.dtb
		dtb-$(CONFIG_SOC_SAM_V7) += \
		at91-kizbox2.dtb \
		at91-sama5d27_som1_ek.dtb \
		at91-sama5d2_xplained.dtb \
		at91-sama5d3_xplained.dtb \
		at91-tse850-3.dtb \

arch/arm/boot/dts/at91-sama5d27_som1.dtsi

0 → 100644

+102 −0

Original line number	Diff line number	Diff line
		/*
		* at91-sama5d27_som1.dtsi - Device Tree file for SAMA5D27 SoM1 board
		*
		* Copyright (c) 2017, Microchip Technology Inc.
		* 2017 Cristian Birsan <cristian.birsan@microchip.com>
		* 2017 Claudiu Beznea <claudiu.beznea@microchip.com>
		*
		* This file is dual-licensed: you can use it either under the terms
		* of the GPL or the X11 license, at your option. Note that this dual
		* licensing only applies to this file, and not this project as a
		* whole.
		*
		* a) This file is free software; you can redistribute it and/or
		* modify it under the terms of the GNU General Public License as
		* published by the Free Software Foundation; either version 2 of the
		* License, or (at your option) any later version.
		*
		* This file is distributed in the hope that it will be useful,
		* but WITHOUT ANY WARRANTY; without even the implied warranty of
		* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
		* GNU General Public License for more details.
		*
		* Or, alternatively,
		*
		* b) Permission is hereby granted, free of charge, to any person
		* obtaining a copy of this software and associated documentation
		* files (the "Software"), to deal in the Software without
		* restriction, including without limitation the rights to use,
		* copy, modify, merge, publish, distribute, sublicense, and/or
		* sell copies of the Software, and to permit persons to whom the
		* Software is furnished to do so, subject to the following
		* conditions:
		*
		* The above copyright notice and this permission notice shall be
		* included in all copies or substantial portions of the Software.
		*
		* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
		* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
		* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
		* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
		* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
		* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
		* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
		* OTHER DEALINGS IN THE SOFTWARE.
		*/
		#include "sama5d2.dtsi"
		#include "sama5d2-pinfunc.h"

		/ {
		model = "Atmel SAMA5D27 SoM1";
		compatible = "atmel,sama5d27-som1", "atmel,sama5d27", "atmel,sama5d2", "atmel,sama5";

		clocks {
		slow_xtal {
		clock-frequency = <32768>;
		};

		main_xtal {
		clock-frequency = <24000000>;
		};
		};

		ahb {
		apb {
		macb0: ethernet@f8008000 {
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_macb0_default>;
		phy-mode = "rmii";

		ethernet-phy@1 {
		reg = <0x1>;
		interrupt-parent = <&pioA>;
		interrupts = <PIN_PD31 IRQ_TYPE_LEVEL_LOW>;
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_macb0_phy_irq>;
		};
		};

		pinctrl@fc038000 {

		pinctrl_macb0_default: macb0_default {
		pinmux = <PIN_PD9__GTXCK>,
		<PIN_PD10__GTXEN>,
		<PIN_PD11__GRXDV>,
		<PIN_PD12__GRXER>,
		<PIN_PD13__GRX0>,
		<PIN_PD14__GRX1>,
		<PIN_PD15__GTX0>,
		<PIN_PD16__GTX1>,
		<PIN_PD17__GMDC>,
		<PIN_PD18__GMDIO>;
		bias-disable;
		};

		pinctrl_macb0_phy_irq: macb0_phy_irq {
		pinmux = <PIN_PD31__GPIO>;
		bias-disable;
		};
		};
		};
		};
		};

arch/arm/boot/dts/at91-sama5d27_som1_ek.dts

0 → 100644

+537 −0

Original line number	Diff line number	Diff line
		/*
		* at91-sama5d27_som1_ek.dts - Device Tree file for SAMA5D27-SOM1-EK board
		*
		* Copyright (c) 2017, Microchip Technology Inc.
		* 2016 Nicolas Ferre <nicolas.ferre@atmel.com>
		* 2017 Cristian Birsan <cristian.birsan@microchip.com>
		* 2017 Claudiu Beznea <claudiu.beznea@microchip.com>
		*
		* This file is dual-licensed: you can use it either under the terms
		* of the GPL or the X11 license, at your option. Note that this dual
		* licensing only applies to this file, and not this project as a
		* whole.
		*
		* a) This file is free software; you can redistribute it and/or
		* modify it under the terms of the GNU General Public License as
		* published by the Free Software Foundation; either version 2 of the
		* License, or (at your option) any later version.
		*
		* This file is distributed in the hope that it will be useful,
		* but WITHOUT ANY WARRANTY; without even the implied warranty of
		* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
		* GNU General Public License for more details.
		*
		* Or, alternatively,
		*
		* b) Permission is hereby granted, free of charge, to any person
		* obtaining a copy of this software and associated documentation
		* files (the "Software"), to deal in the Software without
		* restriction, including without limitation the rights to use,
		* copy, modify, merge, publish, distribute, sublicense, and/or
		* sell copies of the Software, and to permit persons to whom the
		* Software is furnished to do so, subject to the following
		* conditions:
		*
		* The above copyright notice and this permission notice shall be
		* included in all copies or substantial portions of the Software.
		*
		* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
		* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
		* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
		* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
		* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
		* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
		* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
		* OTHER DEALINGS IN THE SOFTWARE.
		*/
		/dts-v1/;
		#include "at91-sama5d27_som1.dtsi"
		#include <dt-bindings/mfd/atmel-flexcom.h>
		#include <dt-bindings/gpio/gpio.h>

		/ {
		model = "Atmel SAMA5D27 SOM1 EK";
		compatible = "atmel,sama5d27-som1-ek", "atmel,sama5d27-som1", "atmel,sama5d27", "atmel,sama5d2", "atmel,sama5";

		chosen {
		stdout-path = "serial0:115200n8";
		};

		ahb {
		usb0: gadget@00300000 {
		atmel,vbus-gpio = <&pioA PIN_PD20 GPIO_ACTIVE_HIGH>;
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_usba_vbus>;
		status = "okay";
		};

		usb1: ohci@00400000 {
		num-ports = <3>;
		atmel,vbus-gpio = <&pioA PIN_PA10 GPIO_ACTIVE_HIGH>;
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_usb_default>;
		status = "okay";
		};

		usb2: ehci@00500000 {
		status = "okay";
		};

		sdmmc0: sdio-host@a0000000 {
		bus-width = <8>;
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_sdmmc0_default>;
		status = "okay";
		};

		sdmmc1: sdio-host@b0000000 {
		bus-width = <4>;
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_sdmmc1_default>;
		status = "okay";
		};

		apb {
		isc: isc@f0008000 {
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_isc_base &pinctrl_isc_data_8bit &pinctrl_isc_data_9_10 &pinctrl_isc_data_11_12>;
		status = "okay";
		};

		spi0: spi@f8000000 {
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_spi0_default>;
		status = "okay";
		};

		macb0: ethernet@f8008000 {
		status = "okay";
		};

		uart1: serial@f8020000 {
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_uart1_default>;
		atmel,use-dma-rx;
		atmel,use-dma-tx;
		status = "okay";
		};

		uart2: serial@f8024000 {
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_mikrobus2_uart>;
		atmel,use-dma-rx;
		atmel-use-dma-tx;
		status = "okay";
		};

		pwm0: pwm@f802c000 {
		status = "okay";
		};

		flx1: flexcom@f8038000 {
		atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
		status = "disabled";

		i2c2: i2c@600 {
		compatible = "atmel,sama5d2-i2c";
		reg = <0x600 0x200>;
		interrupts = <20 IRQ_TYPE_LEVEL_HIGH 7>;
		dmas = <0>, <0>;
		dma-names = "tx", "rx";
		#address-cells = <1>;
		#size-cells = <0>;
		clocks = <&flx1_clk>;
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_mikrobus_i2c>;
		atmel,fifo-size = <16>;
		status = "disabled";
		};
		};

		shdwc@f8048010 {
		atmel,shdwc-debouncer = <976>;
		atmel,wakeup-rtc-timer;

		input@0 {
		reg = <0>;
		atmel,wakeup-type = "low";
		};
		};

		watchdog@f8048040 {
		status = "okay";
		};

		can0: can@f8054000 {
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_can0_default>;
		};

		uart3: serial@fc008000 {
		atmel,use-dma-rx;
		atmel,use-dma-tx;
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_uart3_default>;
		status = "disabled";
		};

		uart4: serial@fc00c000 {
		atmel,use-dma-rx;
		atmel,use-dma-tx;
		pinctrl-name = "default";
		pinctrl-0 = <&pinctrl_mikrobus1_uart>;
		status = "okay";
		};

		flx3: flexcom@fc014000 {
		atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_SPI>;
		status = "disabled";

		uart7: serial@200 {
		compatible = "atmel,at91sam9260-usart";
		reg = <0x200 0x200>;
		interrupts = <22 IRQ_TYPE_LEVEL_HIGH 7>;
		clocks = <&flx3_clk>;
		clock-names = "usart";
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_flx3_default>;
		atmel,fifo-size = <32>;
		status = "disabled";
		};

		spi2: spi@400 {
		compatible = "atmel,at91rm9200-spi";
		reg = <0x400 0x200>;
		interrupts = <22 IRQ_TYPE_LEVEL_HIGH 7>;
		clocks = <&flx3_clk>;
		clock-names = "spi_clk";
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_flx3_default>;
		atmel,fifo-size = <16>;
		status = "disabled";
		};
		};

		flx4: flexcom@fc018000 {
		atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_SPI>;
		status = "okay";

		uart6: serial@200 {
		compatible = "atmel,at91sam9260-usart";
		reg = <0x200 0x200>;
		interrupts = <23 IRQ_TYPE_LEVEL_HIGH 7>;
		clocks = <&flx4_clk>;
		clock-names = "usart";
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_flx4_default>;
		atmel,fifo-size = <32>;
		status = "disabled";
		};

		spi3: spi@400 {
		compatible = "atmel,at91rm9200-spi";
		reg = <0x400 0x200>;
		interrupts = <23 IRQ_TYPE_LEVEL_HIGH 7>;
		clocks = <&flx4_clk>;
		clock-names = "spi_clk";
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_mikrobus_spi &pinctrl_mikrobus1_spi_cs &pinctrl_mikrobus2_spi_cs>;
		atmel,fifo-size = <16>;
		status = "okay";
		};

		i2c3: i2c@600 {
		compatible = "atmel,sama5d2-i2c";
		reg = <0x600 0x200>;
		interrupts = <23 IRQ_TYPE_LEVEL_HIGH 7>;
		dmas = <0>, <0>;
		dma-names = "tx", "rx";
		#address-cells = <1>;
		#size-cells = <0>;
		clocks = <&flx4_clk>;
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_flx4_default>;
		atmel,fifo-size = <16>;
		status = "disabled";
		};
		};

		i2c1: i2c@fc028000 {
		dmas = <0>, <0>;
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_i2c1_default>;
		status = "okay";
		};

		pinctrl@fc038000 {

		pinctrl_can0_default: can0_default {
		pinmux = <PIN_PC10__CANTX0>,
		<PIN_PC11__CANRX0>;
		bias-disable;
		};

		pinctrl_can1_default: can1_default {
		pinmux = <PIN_PC26__CANTX1>,
		<PIN_PC27__CANRX1>;
		bias-disable;
		};

		pinctrl_flx3_default: flx3_default {
		pinmux = <PIN_PC20__FLEXCOM3_IO0>,
		<PIN_PC19__FLEXCOM3_IO1>,
		<PIN_PC18__FLEXCOM3_IO2>,
		<PIN_PC21__FLEXCOM3_IO3>,
		<PIN_PC22__FLEXCOM3_IO4>;
		bias-disable;
		};

		pinctrl_i2c1_default: i2c1_default {
		pinmux = <PIN_PD4__TWD1>,
		<PIN_PD5__TWCK1>;
		bias-disable;
		};

		pinctrl_isc_base: isc_base {
		pinmux = <PIN_PC21__ISC_PCK>,
		<PIN_PC22__ISC_VSYNC>,
		<PIN_PC23__ISC_HSYNC>,
		<PIN_PC24__ISC_MCK>;
		bias-disable;
		};

		pinctrl_isc_data_8bit: isc_data_8bit {
		pinmux = <PIN_PC20__ISC_D11>,
		<PIN_PC19__ISC_D10>,
		<PIN_PC18__ISC_D9>,
		<PIN_PC17__ISC_D8>,
		<PIN_PC16__ISC_D7>,
		<PIN_PC15__ISC_D6>,
		<PIN_PC14__ISC_D5>,
		<PIN_PC13__ISC_D4>;
		bias-disable;
		};

		pinctrl_isc_data_9_10: isc_data_9_10 {
		pinmux = <PIN_PC12__ISC_D3>,
		<PIN_PC11__ISC_D2>;
		bias-disable;
		};

		pinctrl_isc_data_11_12: isc_data_11_12 {
		pinmux = <PIN_PC10__ISC_D1>,
		<PIN_PC9__ISC_D0>;
		bias-disable;
		};

		pinctrl_key_gpio_default: key_gpio_default {
		pinmux = <PIN_PA29__GPIO>;
		bias-pull-up;
		};

		pinctrl_led_gpio_default: led_gpio_default {
		pinmux = <PIN_PA27__GPIO>,
		<PIN_PB1__GPIO>,
		<PIN_PA31__GPIO>;
		bias-pull-up;
		};

		pinctrl_sdmmc0_default: sdmmc0_default {
		cmd_data {
		pinmux = <PIN_PA1__SDMMC0_CMD>,
		<PIN_PA2__SDMMC0_DAT0>,
		<PIN_PA3__SDMMC0_DAT1>,
		<PIN_PA4__SDMMC0_DAT2>,
		<PIN_PA5__SDMMC0_DAT3>,
		<PIN_PA6__SDMMC0_DAT4>,
		<PIN_PA7__SDMMC0_DAT5>,
		<PIN_PA8__SDMMC0_DAT6>,
		<PIN_PA9__SDMMC0_DAT7>;
		bias-pull-up;
		};

		ck_cd_vddsel {
		pinmux = <PIN_PA0__SDMMC0_CK>,
		<PIN_PA11__SDMMC0_VDDSEL>,
		<PIN_PA13__SDMMC0_CD>;
		bias-disable;
		};
		};

		pinctrl_sdmmc1_default: sdmmc1_default {
		cmd_data {
		pinmux = <PIN_PA28__SDMMC1_CMD>,
		<PIN_PA18__SDMMC1_DAT0>,
		<PIN_PA19__SDMMC1_DAT1>,
		<PIN_PA20__SDMMC1_DAT2>,
		<PIN_PA21__SDMMC1_DAT3>;
		bias-pull-up;
		};

		conf-ck_cd {
		pinmux = <PIN_PA22__SDMMC1_CK>,
		<PIN_PA30__SDMMC1_CD>;
		bias-disable;
		};
		};

		pinctrl_spi0_default: spi0_default {
		pinmux = <PIN_PA14__SPI0_SPCK>,
		<PIN_PA15__SPI0_MOSI>,
		<PIN_PA16__SPI0_MISO>,
		<PIN_PA17__SPI0_NPCS0>;
		bias-disable;
		};

		pinctrl_uart1_default: uart1_default {
		pinmux = <PIN_PD2__URXD1>,
		<PIN_PD3__UTXD1>;
		bias-disable;
		};

		pinctrl_uart3_default: uart3_default {
		pinmux = <PIN_PC12__URXD3>,
		<PIN_PC13__UTXD3>;
		bias-disable;
		};

		pinctrl_usb_default: usb_default {
		pinmux = <PIN_PA10__GPIO>,
		<PIN_PD19__GPIO>;
		bias-disable;
		};

		pinctrl_usba_vbus: usba_vbus {
		pinmux = <PIN_PD20__GPIO>;
		bias-disable;
		};

		pinctrl_mikrobus1_an: mikrobus1_an {
		pinmux = <PIN_PD25__GPIO>;
		bias-disable;
		};

		pinctrl_mikrobus2_an: mikrobus2_an {
		pinmux = <PIN_PD26__GPIO>;
		bias-disable;
		};

		pinctrl_mikrobus1_rst: mikrobus1_rst {
		pinmux = <PIN_PB2__GPIO>;
		bias-disable;
		};

		pinctrl_mikrobus2_rst: mikrobus2_rst {
		pinmux = <PIN_PA26__GPIO>;
		bias-disable;
		};

		pinctrl_mikrobus1_spi_cs: mikrobus1_spi_cs {
		pinmux = <PIN_PD0__FLEXCOM4_IO4>;
		bias-disable;
		};

		pinctrl_mikrobus2_spi_cs: mikrobus2_spi_cs {
		pinmux = <PIN_PC31__FLEXCOM4_IO3>;
		bias-disable;
		};

		pinctrl_mikrobus_spi: mikrobus_spi {
		pinmux = <PIN_PC28__FLEXCOM4_IO0>,
		<PIN_PC29__FLEXCOM4_IO1>,
		<PIN_PC30__FLEXCOM4_IO2>;
		bias-disable;
		};

		pinctrl_mikrobus1_pwm: mikrobus1_pwm {
		pinmux = <PIN_PB1__PWML1>;
		bias-disable;
		};

		pinctrl_mikrobus2_pwm: mikrobus2_pwm {
		pinmux = <PIN_PA31__PWML0>;
		bias-disable;
		};

		pinctrl_mikrobus1_int: mikrobus1_int {
		pinmux = <PIN_PB0__GPIO>;
		bias-disable;
		};

		pinctrl_mikrobus2_int: mikrobus2_int {
		pinmux = <PIN_PA25__GPIO>;
		bias-disable;
		};

		pinctrl_mikrobus1_uart: mikrobus1_uart {
		pinmux = <PIN_PB3__URXD4>,
		<PIN_PB4__UTXD4>;
		bias-disable;
		};

		pinctrl_mikrobus2_uart: mikrobus2_uart {
		pinmux = <PIN_PD23__URXD2>,
		<PIN_PD24__UTXD2>;
		bias-disable;
		};

		pinctrl_mikrobus_i2c: mikrobus1_i2c {
		pinmux = <PIN_PA24__FLEXCOM1_IO0>,
		<PIN_PA23__FLEXCOM1_IO1>;
		bias-disable;
		};

		pinctrl_flx4_default: flx4_uart_default {
		pinmux = <PIN_PC28__FLEXCOM4_IO0>,
		<PIN_PC29__FLEXCOM4_IO1>,
		<PIN_PC30__FLEXCOM4_IO2>,
		<PIN_PC31__FLEXCOM4_IO3>,
		<PIN_PD0__FLEXCOM4_IO4>;
		bias-disable;
		};
		};

		can1: can@fc050000 {
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_can1_default>;
		status = "okay";
		};
		};
		};

		gpio_keys {
		compatible = "gpio-keys";

		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_key_gpio_default>;

		pb4 {
		label = "USER";
		gpios = <&pioA PIN_PA29 GPIO_ACTIVE_LOW>;
		linux,code = <0x104>;
		};
		};

		leds {
		compatible = "gpio-leds";
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_led_gpio_default>;
		status = "okay";

		red {
		label = "red";
		gpios = <&pioA PIN_PA27 GPIO_ACTIVE_LOW>;
		};

		green {
		label = "green";
		gpios = <&pioA PIN_PB1 GPIO_ACTIVE_LOW>;
		};

		blue {
		label = "blue";
		gpios = <&pioA PIN_PA31 GPIO_ACTIVE_LOW>;
		linux,default-trigger = "heartbeat";
		};
		};
		};

arch/arm/boot/dts/at91-sama5d2_xplained.dts

+28 −11

Original line number	Diff line number	Diff line
		@@ -68,7 +68,7 @@

		ahb {
		usb0: gadget@00300000 {
		atmel,vbus-gpio = <&pioA 31 GPIO_ACTIVE_HIGH>;
		atmel,vbus-gpio = <&pioA PIN_PA31 GPIO_ACTIVE_HIGH>;
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_usba_vbus>;
		status = "okay";
		@@ -76,8 +76,8 @@

		usb1: ohci@00400000 {
		num-ports = <3>;
		atmel,vbus-gpio = <0 /* &pioA 41 GPIO_ACTIVE_HIGH */
		&pioA 42 GPIO_ACTIVE_HIGH
		atmel,vbus-gpio = <0 /* &pioA PIN_PB9 GPIO_ACTIVE_HIGH */
		&pioA PIN_PB10 GPIO_ACTIVE_HIGH
		0
		>;
		pinctrl-names = "default";
		@@ -127,7 +127,7 @@
		ethernet-phy@1 {
		reg = <0x1>;
		interrupt-parent = <&pioA>;
		interrupts = <73 IRQ_TYPE_LEVEL_LOW>;
		interrupts = <PIN_PC9 IRQ_TYPE_LEVEL_LOW>;
		};
		};

		@@ -160,9 +160,9 @@
		compatible = "active-semi,act8945a";
		reg = <0x5b>;
		active-semi,vsel-high;
		active-semi,chglev-gpios = <&pioA 12 GPIO_ACTIVE_HIGH>;
		active-semi,lbo-gpios = <&pioA 72 GPIO_ACTIVE_LOW>;
		active-semi,irq_gpios = <&pioA 45 GPIO_ACTIVE_LOW>;
		active-semi,chglev-gpios = <&pioA PIN_PA12 GPIO_ACTIVE_HIGH>;
		active-semi,lbo-gpios = <&pioA PIN_PC8 GPIO_ACTIVE_LOW>;
		active-semi,irq_gpios = <&pioA PIN_PB13 GPIO_ACTIVE_LOW>;
		active-semi,input-voltage-threshold-microvolt = <6600>;
		active-semi,precondition-timeout = <40>;
		active-semi,total-timeout = <3>;
		@@ -355,6 +355,14 @@
		bias-pull-up;
		};

		pinctrl_classd_default: classd_default {
		pinmux = <PIN_PB1__CLASSD_R0>,
		<PIN_PB2__CLASSD_R1>,
		<PIN_PB3__CLASSD_R2>,
		<PIN_PB4__CLASSD_R3>;
		bias-pull-up;
		};

		pinctrl_flx0_default: flx0_default {
		pinmux = <PIN_PB28__FLEXCOM0_IO0>,
		<PIN_PB29__FLEXCOM0_IO1>;
		@@ -488,6 +496,14 @@

		};

		classd: classd@fc048000 {
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_classd_default>;
		atmel,pwm-type = "diff";
		atmel,non-overlap-time = <10>;
		status = "okay";
		};

		can1: can@fc050000 {
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_can1_default>;
		@@ -504,7 +520,7 @@

		bp1 {
		label = "PB_USER";
		gpios = <&pioA 41 GPIO_ACTIVE_LOW>;
		gpios = <&pioA PIN_PB9 GPIO_ACTIVE_LOW>;
		linux,code = <0x104>;
		};
		};
		@@ -517,17 +533,18 @@

		red {
		label = "red";
		gpios = <&pioA 38 GPIO_ACTIVE_LOW>;
		gpios = <&pioA PIN_PB6 GPIO_ACTIVE_LOW>;
		};


		green {
		label = "green";
		gpios = <&pioA 37 GPIO_ACTIVE_LOW>;
		gpios = <&pioA PIN_PB5 GPIO_ACTIVE_LOW>;
		};

		blue {
		label = "blue";
		gpios = <&pioA 32 GPIO_ACTIVE_LOW>;
		gpios = <&pioA PIN_PB0 GPIO_ACTIVE_LOW>;
		linux,default-trigger = "heartbeat";
		};
		};

arch/arm/boot/dts/at91sam9g45.dtsi

+21 −0

Original line number	Diff line number	Diff line
		@@ -455,6 +455,16 @@
		>;

		/* shared pinctrl settings */
		ac97 {
		pinctrl_ac97: ac97-0 {
		atmel,pins =
		<AT91_PIOD 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* AC97RX */
		AT91_PIOD 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* AC97TX */
		AT91_PIOD 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* AC97FS */
		AT91_PIOD 9 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* AC97CK */
		};
		};

		adc0 {
		pinctrl_adc0_adtrg: adc0_adtrg {
		atmel,pins = <AT91_PIOD 28 AT91_PERIPH_A AT91_PINCTRL_NONE>;
		@@ -1043,6 +1053,17 @@
		status = "disabled";
		};

		ac97: sound@fffac000 {
		compatible = "atmel,at91sam9263-ac97c";
		reg = <0xfffac000 0x4000>;
		interrupts = <24 IRQ_TYPE_LEVEL_HIGH 4>;
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_ac97>;
		clocks = <&ac97_clk>;
		clock-names = "ac97_clk";
		status = "disabled";
		};

		adc0: adc@fffb0000 {
		#address-cells = <1>;
		#size-cells = <0>;

Admin message