Commit e0f909bc authored by Russell King's avatar Russell King Committed by David S. Miller
Browse files

net: switch to using PHY_INTERFACE_MODE_10GBASER rather than 10GKR 



Switch network drivers, phy drivers, and SFP/phylink over to use the
more correct 10GBASE-R, rather than 10GBASE-KR. 10GBASE-KR is backplane
ethernet, which is 10GBASE-R with autonegotiation on top, which our
current usage on the affected platforms does not have.

The only remaining user of PHY_INTERFACE_MODE_10GKR is the Aquantia
PHY, which has a separate mode for 10GBASE-KR.

For Marvell mvpp2, we detect 10GBASE-KR, and rewrite it to 10GBASE-R
for compatibility with existing DT - this is the only network driver
at present that makes use of PHY_INTERFACE_MODE_10GKR.

Signed-off-by: default avatarRussell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: default avatarAndrew Lunn <andrew@lunn.ch>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent c114574e

drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c

+14 −5
Original line number Diff line number Diff line
@@ -1114,7 +1114,7 @@ mvpp2_shared_interrupt_mask_unmask(struct mvpp2_port *port, bool mask) 
/* Port configuration routines */

static bool mvpp2_is_xlg(phy_interface_t interface)

{

	return interface == PHY_INTERFACE_MODE_10GKR ||

	return interface == PHY_INTERFACE_MODE_10GBASER ||

	       interface == PHY_INTERFACE_MODE_XAUI;

}
@@ -1200,7 +1200,7 @@ static int mvpp22_gop_init(struct mvpp2_port *port) 
	case PHY_INTERFACE_MODE_2500BASEX:

		mvpp22_gop_init_sgmii(port);

		break;

	case PHY_INTERFACE_MODE_10GKR:

	case PHY_INTERFACE_MODE_10GBASER:

		if (port->gop_id != 0)

			goto invalid_conf;

		mvpp22_gop_init_10gkr(port);
@@ -1649,7 +1649,7 @@ static void mvpp22_pcs_reset_deassert(struct mvpp2_port *port) 
	xpcs = priv->iface_base + MVPP22_XPCS_BASE(port->gop_id);



	switch (port->phy_interface) {

	case PHY_INTERFACE_MODE_10GKR:

	case PHY_INTERFACE_MODE_10GBASER:

		val = readl(mpcs + MVPP22_MPCS_CLK_RESET);

		val |= MAC_CLK_RESET_MAC | MAC_CLK_RESET_SD_RX |

		       MAC_CLK_RESET_SD_TX;
@@ -4758,7 +4758,7 @@ static void mvpp2_phylink_validate(struct phylink_config *config, 


	/* Invalid combinations */

	switch (state->interface) {

	case PHY_INTERFACE_MODE_10GKR:

	case PHY_INTERFACE_MODE_10GBASER:

	case PHY_INTERFACE_MODE_XAUI:

		if (port->gop_id != 0)

			goto empty_set;
@@ -4780,7 +4780,7 @@ static void mvpp2_phylink_validate(struct phylink_config *config, 
	phylink_set(mask, Asym_Pause);



	switch (state->interface) {

	case PHY_INTERFACE_MODE_10GKR:

	case PHY_INTERFACE_MODE_10GBASER:

	case PHY_INTERFACE_MODE_XAUI:

	case PHY_INTERFACE_MODE_NA:

		if (port->gop_id == 0) {
@@ -5247,6 +5247,15 @@ static int mvpp2_port_probe(struct platform_device *pdev, 
		goto err_free_netdev;

	}



	/*

	 * Rewrite 10GBASE-KR to 10GBASE-R for compatibility with existing DT.

	 * Existing usage of 10GBASE-KR is not correct; no backplane

	 * negotiation is done, and this driver does not actually support

	 * 10GBASE-KR.

	 */

	if (phy_mode == PHY_INTERFACE_MODE_10GKR)

		phy_mode = PHY_INTERFACE_MODE_10GBASER;



	if (port_node) {

		comphy = devm_of_phy_get(&pdev->dev, port_node, NULL);

		if (IS_ERR(comphy)) {

drivers/net/phy/aquantia_main.c

+5 −2
Original line number Diff line number Diff line
@@ -358,9 +358,11 @@ static int aqr107_read_status(struct phy_device *phydev) 


	switch (FIELD_GET(MDIO_PHYXS_VEND_IF_STATUS_TYPE_MASK, val)) {

	case MDIO_PHYXS_VEND_IF_STATUS_TYPE_KR:

	case MDIO_PHYXS_VEND_IF_STATUS_TYPE_XFI:

		phydev->interface = PHY_INTERFACE_MODE_10GKR;

		break;

	case MDIO_PHYXS_VEND_IF_STATUS_TYPE_XFI:

		phydev->interface = PHY_INTERFACE_MODE_10GBASER;

		break;

	case MDIO_PHYXS_VEND_IF_STATUS_TYPE_USXGMII:

		phydev->interface = PHY_INTERFACE_MODE_USXGMII;

		break;
@@ -493,7 +495,8 @@ static int aqr107_config_init(struct phy_device *phydev) 
	    phydev->interface != PHY_INTERFACE_MODE_2500BASEX &&

	    phydev->interface != PHY_INTERFACE_MODE_XGMII &&

	    phydev->interface != PHY_INTERFACE_MODE_USXGMII &&

	    phydev->interface != PHY_INTERFACE_MODE_10GKR)

	    phydev->interface != PHY_INTERFACE_MODE_10GKR &&

	    phydev->interface != PHY_INTERFACE_MODE_10GBASER)

		return -ENODEV;



	WARN(phydev->interface == PHY_INTERFACE_MODE_XGMII,

drivers/net/phy/bcm84881.c

+2 −2
Original line number Diff line number Diff line
@@ -53,7 +53,7 @@ static int bcm84881_config_init(struct phy_device *phydev) 
	switch (phydev->interface) {

	case PHY_INTERFACE_MODE_SGMII:

	case PHY_INTERFACE_MODE_2500BASEX:

	case PHY_INTERFACE_MODE_10GKR:

	case PHY_INTERFACE_MODE_10GBASER:

		break;

	default:

		return -ENODEV;
@@ -218,7 +218,7 @@ static int bcm84881_read_status(struct phy_device *phydev) 
	if (mode == 1 || mode == 2)

		phydev->interface = PHY_INTERFACE_MODE_SGMII;

	else if (mode == 3)

		phydev->interface = PHY_INTERFACE_MODE_10GKR;

		phydev->interface = PHY_INTERFACE_MODE_10GBASER;

	else if (mode == 4)

		phydev->interface = PHY_INTERFACE_MODE_2500BASEX;

	switch (mode & 7) {

drivers/net/phy/marvell10g.c

+6 −5
Original line number Diff line number Diff line
@@ -216,7 +216,7 @@ static int mv3310_sfp_insert(void *upstream, const struct sfp_eeprom_id *id) 
	sfp_parse_support(phydev->sfp_bus, id, support);

	iface = sfp_select_interface(phydev->sfp_bus, support);



	if (iface != PHY_INTERFACE_MODE_10GKR) {

	if (iface != PHY_INTERFACE_MODE_10GBASER) {

		dev_err(&phydev->mdio.dev, "incompatible SFP module inserted\n");

		return -EINVAL;

	}
@@ -304,7 +304,7 @@ static int mv3310_config_init(struct phy_device *phydev) 
	    phydev->interface != PHY_INTERFACE_MODE_2500BASEX &&

	    phydev->interface != PHY_INTERFACE_MODE_XAUI &&

	    phydev->interface != PHY_INTERFACE_MODE_RXAUI &&

	    phydev->interface != PHY_INTERFACE_MODE_10GKR)

	    phydev->interface != PHY_INTERFACE_MODE_10GBASER)

		return -ENODEV;



	return 0;
@@ -386,16 +386,17 @@ static void mv3310_update_interface(struct phy_device *phydev) 
{

	if ((phydev->interface == PHY_INTERFACE_MODE_SGMII ||

	     phydev->interface == PHY_INTERFACE_MODE_2500BASEX ||

	     phydev->interface == PHY_INTERFACE_MODE_10GKR) && phydev->link) {

	     phydev->interface == PHY_INTERFACE_MODE_10GBASER) &&

	    phydev->link) {

		/* The PHY automatically switches its serdes interface (and

		 * active PHYXS instance) between Cisco SGMII, 10GBase-KR and

		 * active PHYXS instance) between Cisco SGMII, 10GBase-R and

		 * 2500BaseX modes according to the speed.  Florian suggests

		 * setting phydev->interface to communicate this to the MAC.

		 * Only do this if we are already in one of the above modes.

		 */

		switch (phydev->speed) {

		case SPEED_10000:

			phydev->interface = PHY_INTERFACE_MODE_10GKR;

			phydev->interface = PHY_INTERFACE_MODE_10GBASER;

			break;

		case SPEED_2500:

			phydev->interface = PHY_INTERFACE_MODE_2500BASEX;

drivers/net/phy/phylink.c

+1 −0
Original line number Diff line number Diff line
@@ -298,6 +298,7 @@ static int phylink_parse_mode(struct phylink *pl, struct fwnode_handle *fwnode) 
			break;



		case PHY_INTERFACE_MODE_10GKR:

		case PHY_INTERFACE_MODE_10GBASER:

			phylink_set(pl->supported, 10baseT_Half);

			phylink_set(pl->supported, 10baseT_Full);

			phylink_set(pl->supported, 100baseT_Half);

CRA Git | Maintained and supported by SUSTech CRA and CCSE