net: phy: add PHY_INTERFACE_MODE_10GBASER

    duplex, pause or other settings.  This is dependent on the MAC and/or

    PHY behaviour.

``PHY_INTERFACE_MODE_10GBASER``

    This is the IEEE 802.3 Clause 49 defined 10GBASE-R protocol used with

    various different mediums. Please refer to the IEEE standard for a

    definition of this.

    Note: 10GBASE-R is just one protocol that can be used with XFI and SFI.

    XFI and SFI permit multiple protocols over a single SERDES lane, and

    also defines the electrical characteristics of the signals with a host

    compliance board plugged into the host XFP/SFP connector. Therefore,

    XFI and SFI are not PHY interface types in their own right.

``PHY_INTERFACE_MODE_10GKR``

    This is the IEEE 802.3 Clause 49 defined 10GBASE-R with Clause 73

    autonegotiation. Please refer to the IEEE standard for further

    information.

    Note: due to legacy usage, some 10GBASE-R usage incorrectly makes

    use of this definition.

Pause frames / flow control

===========================

	PHY_INTERFACE_MODE_2500BASEX,

	PHY_INTERFACE_MODE_RXAUI,

	PHY_INTERFACE_MODE_XAUI,

	/* 10GBASE-KR, XFI, SFI - single lane 10G Serdes */

	PHY_INTERFACE_MODE_10GKR,

	/* 10GBASE-R, XFI, SFI - single lane 10G Serdes */

	PHY_INTERFACE_MODE_10GBASER,

	PHY_INTERFACE_MODE_USXGMII,

	/* 10GBASE-KR - with Clause 73 AN */

	PHY_INTERFACE_MODE_10GKR,

	PHY_INTERFACE_MODE_MAX,

} phy_interface_t;

		return "rxaui";

	case PHY_INTERFACE_MODE_XAUI:

		return "xaui";

	case PHY_INTERFACE_MODE_10GKR:

		return "10gbase-kr";

	case PHY_INTERFACE_MODE_10GBASER:

		return "10gbase-r";

	case PHY_INTERFACE_MODE_USXGMII:

		return "usxgmii";

	case PHY_INTERFACE_MODE_10GKR:

		return "10gbase-kr";

	default:

		return "unknown";

	}