Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs

				struct file *, unsigned open_flag,

				umode_t create_mode, int *opened);

	int (*tmpfile) (struct inode *, struct dentry *, umode_t);

	int (*dentry_open)(struct dentry *, struct file *, const struct cred *);

locking rules:

	all may block

update_time:	no

atomic_open:	yes

tmpfile:	no

dentry_open:	no

	Additionally, ->rmdir(), ->unlink() and ->rename() have ->i_mutex on

victim.

Written by: Neil Brown <neilb@suse.de>

Overlay Filesystem

==================

This document describes a prototype for a new approach to providing

overlay-filesystem functionality in Linux (sometimes referred to as

union-filesystems).  An overlay-filesystem tries to present a

filesystem which is the result over overlaying one filesystem on top

of the other.

The result will inevitably fail to look exactly like a normal

filesystem for various technical reasons.  The expectation is that

many use cases will be able to ignore these differences.

This approach is 'hybrid' because the objects that appear in the

filesystem do not all appear to belong to that filesystem.  In many

cases an object accessed in the union will be indistinguishable

from accessing the corresponding object from the original filesystem.

This is most obvious from the 'st_dev' field returned by stat(2).

While directories will report an st_dev from the overlay-filesystem,

all non-directory objects will report an st_dev from the lower or

upper filesystem that is providing the object.  Similarly st_ino will

only be unique when combined with st_dev, and both of these can change

over the lifetime of a non-directory object.  Many applications and

tools ignore these values and will not be affected.

Upper and Lower

---------------

An overlay filesystem combines two filesystems - an 'upper' filesystem

and a 'lower' filesystem.  When a name exists in both filesystems, the

object in the 'upper' filesystem is visible while the object in the

'lower' filesystem is either hidden or, in the case of directories,

merged with the 'upper' object.

It would be more correct to refer to an upper and lower 'directory

tree' rather than 'filesystem' as it is quite possible for both

directory trees to be in the same filesystem and there is no

requirement that the root of a filesystem be given for either upper or

lower.

The lower filesystem can be any filesystem supported by Linux and does

not need to be writable.  The lower filesystem can even be another

overlayfs.  The upper filesystem will normally be writable and if it

is it must support the creation of trusted.* extended attributes, and

must provide valid d_type in readdir responses, so NFS is not suitable.

A read-only overlay of two read-only filesystems may use any

filesystem type.

Directories

-----------

Overlaying mainly involves directories.  If a given name appears in both

upper and lower filesystems and refers to a non-directory in either,

then the lower object is hidden - the name refers only to the upper

object.

Where both upper and lower objects are directories, a merged directory

is formed.

At mount time, the two directories given as mount options "lowerdir" and

"upperdir" are combined into a merged directory:

  mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper,\

workdir=/work /merged

The "workdir" needs to be an empty directory on the same filesystem

as upperdir.

Then whenever a lookup is requested in such a merged directory, the

lookup is performed in each actual directory and the combined result

is cached in the dentry belonging to the overlay filesystem.  If both

actual lookups find directories, both are stored and a merged

directory is created, otherwise only one is stored: the upper if it

exists, else the lower.

Only the lists of names from directories are merged.  Other content

such as metadata and extended attributes are reported for the upper

directory only.  These attributes of the lower directory are hidden.

whiteouts and opaque directories

--------------------------------

In order to support rm and rmdir without changing the lower

filesystem, an overlay filesystem needs to record in the upper filesystem

that files have been removed.  This is done using whiteouts and opaque

directories (non-directories are always opaque).

A whiteout is created as a character device with 0/0 device number.

When a whiteout is found in the upper level of a merged directory, any

matching name in the lower level is ignored, and the whiteout itself

is also hidden.

A directory is made opaque by setting the xattr "trusted.overlay.opaque"

to "y".  Where the upper filesystem contains an opaque directory, any

directory in the lower filesystem with the same name is ignored.

readdir

-------

When a 'readdir' request is made on a merged directory, the upper and

lower directories are each read and the name lists merged in the

obvious way (upper is read first, then lower - entries that already

exist are not re-added).  This merged name list is cached in the

'struct file' and so remains as long as the file is kept open.  If the

directory is opened and read by two processes at the same time, they

will each have separate caches.  A seekdir to the start of the

directory (offset 0) followed by a readdir will cause the cache to be

discarded and rebuilt.

This means that changes to the merged directory do not appear while a

directory is being read.  This is unlikely to be noticed by many

programs.

seek offsets are assigned sequentially when the directories are read.

Thus if

  - read part of a directory

  - remember an offset, and close the directory

  - re-open the directory some time later

  - seek to the remembered offset

there may be little correlation between the old and new locations in

the list of filenames, particularly if anything has changed in the

directory.

Readdir on directories that are not merged is simply handled by the

underlying directory (upper or lower).

Non-directories

---------------

Objects that are not directories (files, symlinks, device-special

files etc.) are presented either from the upper or lower filesystem as

appropriate.  When a file in the lower filesystem is accessed in a way

the requires write-access, such as opening for write access, changing

some metadata etc., the file is first copied from the lower filesystem

to the upper filesystem (copy_up).  Note that creating a hard-link

also requires copy_up, though of course creation of a symlink does

not.

The copy_up may turn out to be unnecessary, for example if the file is

opened for read-write but the data is not modified.

The copy_up process first makes sure that the containing directory

exists in the upper filesystem - creating it and any parents as

necessary.  It then creates the object with the same metadata (owner,

mode, mtime, symlink-target etc.) and then if the object is a file, the

data is copied from the lower to the upper filesystem.  Finally any

extended attributes are copied up.

Once the copy_up is complete, the overlay filesystem simply

provides direct access to the newly created file in the upper

filesystem - future operations on the file are barely noticed by the

overlay filesystem (though an operation on the name of the file such as

rename or unlink will of course be noticed and handled).

Non-standard behavior

---------------------

The copy_up operation essentially creates a new, identical file and

moves it over to the old name.  The new file may be on a different

filesystem, so both st_dev and st_ino of the file may change.

Any open files referring to this inode will access the old data and

metadata.  Similarly any file locks obtained before copy_up will not

apply to the copied up file.

On a file opened with O_RDONLY fchmod(2), fchown(2), futimesat(2) and

fsetxattr(2) will fail with EROFS.

If a file with multiple hard links is copied up, then this will

"break" the link.  Changes will not be propagated to other names

referring to the same inode.

Symlinks in /proc/PID/ and /proc/PID/fd which point to a non-directory

object in overlayfs will not contain valid absolute paths, only

relative paths leading up to the filesystem's root.  This will be

fixed in the future.

Some operations are not atomic, for example a crash during copy_up or

rename will leave the filesystem in an inconsistent state.  This will

be addressed in the future.

Changes to underlying filesystems

---------------------------------

Offline changes, when the overlay is not mounted, are allowed to either

the upper or the lower trees.

Changes to the underlying filesystems while part of a mounted overlay

filesystem are not allowed.  If the underlying filesystem is changed,

the behavior of the overlay is undefined, though it will not result in

a crash or deadlock.

	int (*atomic_open)(struct inode *, struct dentry *, struct file *,

			unsigned open_flag, umode_t create_mode, int *opened);

	int (*tmpfile) (struct inode *, struct dentry *, umode_t);

	int (*dentry_open)(struct dentry *, struct file *, const struct cred *);

};

Again, all methods are called without any locks being held, unless

  	but instead uses bmap to find out where the blocks in the file

  	are and uses those addresses directly.

  dentry_open: *WARNING: probably going away soon, do not use!* This is an

	alternative to f_op->open(), the difference is that this method may open

	a file not necessarily originating from the same filesystem as the one

	i_op->open() was called on.  It may be useful for stacking filesystems

	which want to allow native I/O directly on underlying files.

  invalidatepage: If a page has PagePrivate set, then invalidatepage

        will be called when part or all of the page is to be removed

F:	include/scsi/osd_*

F:	fs/exofs/

OVERLAYFS FILESYSTEM

M:	Miklos Szeredi <miklos@szeredi.hu>

L:	linux-fsdevel@vger.kernel.org

S:	Supported

F:	fs/overlayfs/*

F:	Documentation/filesystems/overlayfs.txt

P54 WIRELESS DRIVER

M:	Christian Lamparter <chunkeey@googlemail.com>

L:	linux-wireless@vger.kernel.org

source "fs/autofs4/Kconfig"

source "fs/fuse/Kconfig"

source "fs/overlayfs/Kconfig"

menu "Caches"