Commit 97cb8f1e authored by Hans de Goede's avatar Hans de Goede Committed by Maxime Ripard
Browse files

ARM: dts: sun4i: Add new ba10-tvbox board 



The ba10 tvbox is an A10 based android tvbox, with 512M RAM, 8G nand flash,
rtl8188ctv usb wifi 1 USB-A receptacle hooked up to an EHCI/OHCI controller,
1 USB-A receptacle hooked up to the OTG and 100Mbit ethernet using a
rtl8201 phy.

The PCB is labelled ba10 hence I've named the board ba10-tvbox. It is used
in noname allwinner A10 tv-boxes.

Signed-off-by: default avatarHans de Goede <hdegoede@redhat.com>
Signed-off-by: default avatarMaxime Ripard <maxime.ripard@free-electrons.com>
parent 04089927

arch/arm/boot/dts/Makefile

+1 −0
Original line number Diff line number Diff line
@@ -360,6 +360,7 @@ dtb-$(CONFIG_ARCH_STI)+= stih407-b2120.dtb \ 
	stih416-b2020-revE.dtb

dtb-$(CONFIG_MACH_SUN4I) += \

	sun4i-a10-a1000.dtb \

	sun4i-a10-ba10-tvbox.dtb \

	sun4i-a10-cubieboard.dtb \

	sun4i-a10-mini-xplus.dtb \

	sun4i-a10-hackberry.dtb \

arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts

0 → 100644
+110 −0
Original line number Diff line number Diff line 
/*

 * Copyright 2014 Hans de Goede <hdegoede@redhat.com>

 *

 * The code contained herein is licensed under the GNU General Public

 * License. You may obtain a copy of the GNU General Public License

 * Version 2 or later at the following locations:

 *

 * http://www.opensource.org/licenses/gpl-license.html

 * http://www.gnu.org/copyleft/gpl.html

 */



/dts-v1/;

/include/ "sun4i-a10.dtsi"

/include/ "sunxi-common-regulators.dtsi"



/ {

	model = "BA10 tvbox";

	compatible = "allwinner,ba10-tvbox", "allwinner,sun4i-a10";



	soc@01c00000 {

		emac: ethernet@01c0b000 {

			pinctrl-names = "default";

			pinctrl-0 = <&emac_pins_a>;

			phy = <&phy1>;

			status = "okay";

		};



		mdio@01c0b080 {

			status = "okay";



			phy1: ethernet-phy@1 {

				reg = <1>;

			};

		};



		mmc0: mmc@01c0f000 {

			pinctrl-names = "default";

			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;

			vmmc-supply = <&reg_vcc3v3>;

			bus-width = <4>;

			cd-gpios = <&pio 7 1 0>; /* PH1 */

			cd-inverted;

			status = "okay";

		};



		usbphy: phy@01c13400 {

			usb1_vbus-supply = <&reg_usb1_vbus>;

			usb2_vbus-supply = <&reg_usb2_vbus>;

			status = "okay";

		};



		ehci0: usb@01c14000 {

			status = "okay";

		};



		ohci0: usb@01c14400 {

			status = "okay";

		};



		ehci1: usb@01c1c000 {

			status = "okay";

		};



		ohci1: usb@01c1c400 {

			status = "okay";

		};



		pinctrl@01c20800 {

			usb2_vbus_pin_a: usb2_vbus_pin@0 {

				allwinner,pins = "PH12";

			};

		};



		ir0: ir@01c21800 {

			pinctrl-names = "default";

			pinctrl-0 = <&ir0_pins_a>;

			status = "okay";

		};



		uart0: serial@01c28000 {

			pinctrl-names = "default";

			pinctrl-0 = <&uart0_pins_a>;

			status = "okay";

		};



		i2c0: i2c@01c2ac00 {

			pinctrl-names = "default";

			pinctrl-0 = <&i2c0_pins_a>;

			status = "okay";



			axp209: pmic@34 {

				compatible = "x-powers,axp209";

				reg = <0x34>;

				interrupts = <0>;



				interrupt-controller;

				#interrupt-cells = <1>;

			};

		};

	};



	reg_usb1_vbus: usb1-vbus {

		status = "okay";

	};



	reg_usb2_vbus: usb2-vbus {

		gpio = <&pio 7 12 0>;

		status = "okay";

	};

};

CRA Git | Maintained and supported by SUSTech CRA and CCSE