ARM: dts: sun7i: Add board support for LinkSprite pcDuino V3

	sun7i-a20-cubieboard2.dtb \

	sun7i-a20-cubietruck.dtb \

	sun7i-a20-i12-tvbox.dtb \

	sun7i-a20-olinuxino-micro.dtb

	sun7i-a20-olinuxino-micro.dtb \

	sun7i-a20-pcduino3.dtb

dtb-$(CONFIG_MACH_SUN8I) += \

	sun8i-a23-ippo-q8h-v5.dtb

dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \

/*

 * Copyright 2014 Zoltan HERPAI

 * Zoltan HERPAI <wigyori@uid0.hu>

 *

 * The code contained herein is licensed under the GNU General Public

 * License. You may obtain a copy of the GNU General Public License

 * Version 2 or later at the following locations:

 *

 * http://www.opensource.org/licenses/gpl-license.html

 * http://www.gnu.org/copyleft/gpl.html

 */

/dts-v1/;

/include/ "sun7i-a20.dtsi"

/include/ "sunxi-common-regulators.dtsi"

#include <dt-bindings/gpio/gpio.h>

#include <dt-bindings/input/input.h>

/ {

	model = "LinkSprite pcDuino3";

	compatible = "linksprite,pcduino3", "allwinner,sun7i-a20";

	soc@01c00000 {

		mmc0: mmc@01c0f000 {

			pinctrl-names = "default";

			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;

			vmmc-supply = <&reg_vcc3v3>;

			bus-width = <4>;

			cd-gpios = <&pio 7 1 0>; /* PH1 */

			cd-inverted;

			status = "okay";

		};

		usbphy: phy@01c13400 {

			usb1_vbus-supply = <&reg_usb1_vbus>;

			usb2_vbus-supply = <&reg_usb2_vbus>;

			status = "okay";

		};

		ehci0: usb@01c14000 {

			status = "okay";

		};

		ohci0: usb@01c14400 {

			status = "okay";

		};

		ahci: sata@01c18000 {

			target-supply = <&reg_ahci_5v>;

			status = "okay";

		};

		ehci1: usb@01c1c000 {

			status = "okay";

		};

		ohci1: usb@01c1c400 {

			status = "okay";

		};

		pinctrl@01c20800 {

			ahci_pwr_pin_a: ahci_pwr_pin@0 {

				allwinner,pins = "PH2";

			};

			led_pins_pcduino3: led_pins@0 {

				allwinner,pins = "PH15", "PH16";

				allwinner,function = "gpio_out";

				allwinner,drive = <0>;

				allwinner,pull = <0>;

			};

			key_pins_pcduino3: key_pins@0 {

				allwinner,pins = "PH17", "PH18", "PH19";

				allwinner,function = "gpio_in";

				allwinner,drive = <0>;

				allwinner,pull = <0>;

			};

		};

		ir0: ir@01c21800 {

			pinctrl-names = "default";

			pinctrl-0 = <&ir0_pins_a>;

			status = "okay";

		};

		uart0: serial@01c28000 {

			pinctrl-names = "default";

			pinctrl-0 = <&uart0_pins_a>;

			status = "okay";

		};

		i2c0: i2c@01c2ac00 {

			pinctrl-names = "default";

			pinctrl-0 = <&i2c0_pins_a>;

			status = "okay";

			axp209: pmic@34 {

				compatible = "x-powers,axp209";

				reg = <0x34>;

				interrupt-parent = <&nmi_intc>;

				interrupts = <0 8>;

				interrupt-controller;

				#interrupt-cells = <1>;

			};

		};

		gmac: ethernet@01c50000 {

			pinctrl-names = "default";

			pinctrl-0 = <&gmac_pins_mii_a>;

			phy = <&phy1>;

			phy-mode = "mii";

			status = "okay";

			phy1: ethernet-phy@1 {

				reg = <1>;

			};

		};

	};

	leds {

		compatible = "gpio-leds";

		pinctrl-names = "default";

		pinctrl-0 = <&led_pins_pcduino3>;

		tx {

			label = "pcduino3:green:tx";

			gpios = <&pio 7 15 GPIO_ACTIVE_LOW>;

		};

		rx {

			label = "pcduino3:green:rx";

			gpios = <&pio 7 16 GPIO_ACTIVE_LOW>;

		};

	};

	gpio_keys {

		compatible = "gpio-keys";

		pinctrl-names = "default";

		pinctrl-0 = <&key_pins_pcduino3>;

		#address-cells = <1>;

		#size-cells = <0>;

		button@0 {

			label = "Key Back";

			linux,code = <KEY_BACK>;

			gpios = <&pio 7 17 GPIO_ACTIVE_LOW>;

		};

		button@1 {

			label = "Key Home";

			linux,code = <KEY_HOME>;

			gpios = <&pio 7 18 GPIO_ACTIVE_LOW>;

		};

		button@2 {

			label = "Key Menu";

			linux,code = <KEY_MENU>;

			gpios = <&pio 7 19 GPIO_ACTIVE_LOW>;

		};

	};

	reg_usb1_vbus: usb1-vbus {

		status = "okay";

	};

	reg_usb2_vbus: usb2-vbus {

		status = "okay";

	};

	reg_ahci_5v: ahci-5v {

		gpio = <&pio 7 2 0>;

		status = "okay";

	};

};