Commit 01259620 authored by Ulf Hansson's avatar Ulf Hansson Committed by Russell King
Browse files

ARM: 7726/1: mmc: mmci: Add card_busy function to improve UHS card support 



To verify a signal voltage switch at initialization of UHS cards the
.card_busy callback is used. For some of the ST-variants, card busy
detection on the DAT0 pin is supported.

We extend the variant struct with a busy_detect flag to indicate
support for it. A corresponding busy detect function, which polls the
busy status bit, is then set to the .card_busy callback.

Signed-off-by: default avatarUlf Hansson <ulf.hansson@linaro.org>
Signed-off-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
parent 9cc639a2

drivers/mmc/host/mmci.c

+32 −1
Original line number Original line Diff line number Diff line
@@ -61,6 +61,7 @@ static unsigned int fmax = 515633; 
 * @pwrreg_powerup: power up value for MMCIPOWER register

 * @pwrreg_powerup: power up value for MMCIPOWER register

 * @signal_direction: input/out direction of bus signals can be indicated

 * @signal_direction: input/out direction of bus signals can be indicated

 * @pwrreg_clkgate: MMCIPOWER register must be used to gate the clock

 * @pwrreg_clkgate: MMCIPOWER register must be used to gate the clock

 * @busy_detect: true if busy detection on dat0 is supported

 */

 */

struct variant_data {

struct variant_data {

	unsigned int		clkreg;

	unsigned int		clkreg;
@@ -74,6 +75,7 @@ struct variant_data { 
	u32			pwrreg_powerup;

	u32			pwrreg_powerup;

	bool			signal_direction;

	bool			signal_direction;

	bool			pwrreg_clkgate;

	bool			pwrreg_clkgate;

	bool			busy_detect;

};

};





static struct variant_data variant_arm = {

static struct variant_data variant_arm = {
@@ -132,6 +134,7 @@ static struct variant_data variant_ux500 = { 
	.pwrreg_powerup		= MCI_PWR_ON,

	.pwrreg_powerup		= MCI_PWR_ON,

	.signal_direction	= true,

	.signal_direction	= true,

	.pwrreg_clkgate		= true,

	.pwrreg_clkgate		= true,

	.busy_detect		= true,

};

};





static struct variant_data variant_ux500v2 = {

static struct variant_data variant_ux500v2 = {
@@ -146,8 +149,28 @@ static struct variant_data variant_ux500v2 = { 
	.pwrreg_powerup		= MCI_PWR_ON,

	.pwrreg_powerup		= MCI_PWR_ON,

	.signal_direction	= true,

	.signal_direction	= true,

	.pwrreg_clkgate		= true,

	.pwrreg_clkgate		= true,

	.busy_detect		= true,

};

};





static int mmci_card_busy(struct mmc_host *mmc)

{

	struct mmci_host *host = mmc_priv(mmc);

	unsigned long flags;

	int busy = 0;



	pm_runtime_get_sync(mmc_dev(mmc));



	spin_lock_irqsave(&host->lock, flags);

	if (readl(host->base + MMCISTATUS) & MCI_ST_CARDBUSY)

		busy = 1;

	spin_unlock_irqrestore(&host->lock, flags);



	pm_runtime_mark_last_busy(mmc_dev(mmc));

	pm_runtime_put_autosuspend(mmc_dev(mmc));



	return busy;

}



/*

/*

 * Validate mmc prerequisites

 * Validate mmc prerequisites

 */

 */
@@ -193,6 +216,9 @@ static void mmci_write_pwrreg(struct mmci_host *host, u32 pwr) 
 */

 */

static void mmci_write_datactrlreg(struct mmci_host *host, u32 datactrl)

static void mmci_write_datactrlreg(struct mmci_host *host, u32 datactrl)

{

{

	/* Keep ST Micro busy mode if enabled */

	datactrl |= host->datactrl_reg & MCI_ST_DPSM_BUSYMODE;



	if (host->datactrl_reg != datactrl) {

	if (host->datactrl_reg != datactrl) {

		host->datactrl_reg = datactrl;

		host->datactrl_reg = datactrl;

		writel(datactrl, host->base + MMCIDATACTRL);

		writel(datactrl, host->base + MMCIDATACTRL);
@@ -1319,7 +1345,7 @@ static irqreturn_t mmci_cd_irq(int irq, void *dev_id) 
	return IRQ_HANDLED;

	return IRQ_HANDLED;

}

}





static const struct mmc_host_ops mmci_ops = {

static struct mmc_host_ops mmci_ops = {

	.request	= mmci_request,

	.request	= mmci_request,

	.pre_req	= mmci_pre_request,

	.pre_req	= mmci_pre_request,

	.post_req	= mmci_post_request,

	.post_req	= mmci_post_request,
@@ -1455,6 +1481,11 @@ static int mmci_probe(struct amba_device *dev, 
		goto clk_disable;

		goto clk_disable;

	}

	}





	if (variant->busy_detect) {

		mmci_ops.card_busy = mmci_card_busy;

		mmci_write_datactrlreg(host, MCI_ST_DPSM_BUSYMODE);

	}



	mmc->ops = &mmci_ops;

	mmc->ops = &mmci_ops;

	/*

	/*

	 * The ARM and ST versions of the block have slightly different

	 * The ARM and ST versions of the block have slightly different

drivers/mmc/host/mmci.h

+2 −0
Original line number Original line Diff line number Diff line
@@ -94,6 +94,7 @@ 
/* Extended status bits for the ST Micro variants */

/* Extended status bits for the ST Micro variants */

#define MCI_ST_SDIOIT		(1 << 22)

#define MCI_ST_SDIOIT		(1 << 22)

#define MCI_ST_CEATAEND		(1 << 23)

#define MCI_ST_CEATAEND		(1 << 23)

#define MCI_ST_CARDBUSY		(1 << 24)





#define MMCICLEAR		0x038

#define MMCICLEAR		0x038

#define MCI_CMDCRCFAILCLR	(1 << 0)

#define MCI_CMDCRCFAILCLR	(1 << 0)
@@ -110,6 +111,7 @@ 
/* Extended status bits for the ST Micro variants */

/* Extended status bits for the ST Micro variants */

#define MCI_ST_SDIOITC		(1 << 22)

#define MCI_ST_SDIOITC		(1 << 22)

#define MCI_ST_CEATAENDC	(1 << 23)

#define MCI_ST_CEATAENDC	(1 << 23)

#define MCI_ST_BUSYENDC		(1 << 24)





#define MMCIMASK0		0x03c

#define MMCIMASK0		0x03c

#define MCI_CMDCRCFAILMASK	(1 << 0)

#define MCI_CMDCRCFAILMASK	(1 << 0)

CRA Git | Maintained and supported by SUSTech CRA and CCSE