dts: rt1010: Fix RT1010 IP base addresses (46eaa81a) · Commits · Wenxi XU / zephyr

boards/arm/mimxrt1010_evk/mimxrt1010_evk.dts

+1 −1

Original line number	Diff line number	Diff line
		@@ -51,7 +51,7 @@ arduino_serial: &lpuart1 {};
		};

		&flexspi {
		reg = <0x402a8000 0x4000>, <0x60000000 DT_SIZE_M(16)>;
		reg = <0x400a0000 0x4000>, <0x60000000 DT_SIZE_M(16)>;
		at25sf128a: at25sf128a@0 {
		compatible = "nxp,imx-flexspi-nor";
		size = <134217728>;

dts/arm/nxp/nxp_rt1010.dtsi

+219 −34

Original line number	Diff line number	Diff line
		@@ -39,40 +39,20 @@
		gptfreq = <12500000>;
		};

		&usb1 {
		interrupts = <25 0>;
		};

		&flexspi {
		interrupts = <26 0>;
		};

		&flexpwm1_pwm0 {
		interrupts = <34 0>;
		};

		&flexpwm1_pwm1 {
		interrupts = <35 0>;
		};

		&flexpwm1_pwm2 {
		interrupts = <36 0>;
		};

		&flexpwm1_pwm3 {
		interrupts = <37 0>;
		};

		&flexpwm1 {
		interrupts = <38 0>;
		};

		&edma0 {
		dma-channels = <16>;
		};

		/ {
		soc {
		/* Remove GPIO3-GPIO9, they don't exist on RT1010 */
		/delete-node/ gpio@401c0000;
		/delete-node/ gpio@401c4000;
		/delete-node/ gpio@42000000;
		/delete-node/ gpio@42004000;
		/delete-node/ gpio@42008000;
		/delete-node/ gpio@4200c000;

		/* Fixup GPIO2 its a different location on RT1010 */
		/delete-node/ gpio@401bc000;

		@@ -98,12 +78,60 @@
		<&iomuxc_gpio_sd_13_gpio2_io13>;
		};

		/* Remove GPIO3-GPIO9, they dont exist on RT1010 */
		/delete-node/ gpio@401c0000;
		/delete-node/ gpio@401c4000;
		/delete-node/ gpio@42004000;
		/delete-node/ gpio@42008000;
		/delete-node/ gpio@4200c000;
		/* Remove Quad TImers, they don't exist on RT1010 */
		/delete-node/ qtmr@401dc000;
		/delete-node/ qtmr@401e0000;
		/delete-node/ qtmr@401e4000;
		/delete-node/ qtmr@401e8000;

		/* Fixup FlexSPI its a different location on RT1010 */
		/delete-node/ spi@402a8000;
		flexspi: spi@400a0000 {
		compatible = "nxp,imx-flexspi";
		reg = <0x400a0000 0x4000>;
		interrupts = <26 0>;
		#address-cells = <1>;
		#size-cells = <0>;
		ahb-bufferable;
		ahb-cacheable;
		status = "disabled";
		};

		/* Remove SEMC, it does'nt exist on RT1010 */
		/delete-node/ semc0@402f0000;

		/* Fixup LPI2C1 and LPI2C2, they have different base addr on RT1010 */
		/delete-node/ i2c@403f0000;
		/delete-node/ i2c@403f4000;

		lpi2c1: i2c@401a4000 {
		compatible = "nxp,imx-lpi2c";
		clock-frequency = <I2C_BITRATE_STANDARD>;
		#address-cells = <1>;
		#size-cells = <0>;
		reg = <0x401a4000 0x4000>;
		interrupts = <28 0>;
		clocks = <&ccm IMX_CCM_LPI2C_CLK 0x70 6>;
		status = "disabled";
		};

		lpi2c2: i2c@401a8000 {
		compatible = "nxp,imx-lpi2c";
		clock-frequency = <I2C_BITRATE_STANDARD>;
		#address-cells = <1>;
		#size-cells = <0>;
		reg = <0x401a8000 0x4000>;
		interrupts = <29 0>;
		clocks = <&ccm IMX_CCM_LPI2C_CLK 0x70 8>;
		status = "disabled";
		};

		/* Remove LPI2C3 & LPI2C4, they don't exist on RT1010 */
		/delete-node/ i2c@403f8000;
		/delete-node/ i2c@403fc000;

		/* Remove LCDIF, it doesn't exist on RT1010 */
		/delete-node/ display-controller@402b8000;

		/* Fixup LPSPI1 and LPSPI2, they have different base addr on RT1010 */
		/delete-node/ spi@40394000;
		@@ -128,11 +156,168 @@
		#size-cells = <0>;
		};

		/* Remove LPUART5-8, they don't exist on RT1010 */
		/delete-node/ uart@40194000;
		/delete-node/ uart@40198000;
		/delete-node/ uart@4019c000;
		/delete-node/ uart@401a0000;

		/* Remove ADC2, it doesn't exist on RT1010 */
		/delete-node/ adc@400C8000;

		/* RT1010 has only one flexSPI controller */
		/delete-node/ spi@402a4000;

		/* Fixup FlexPWM1 it has different base addr and interrupt numbers on RT1010 */
		/delete-node/ flexpwm@403dc000;
		flexpwm1: flexpwm@401cc000 {
		compatible = "nxp,flexpwm";
		reg = <0x401cc000 0x4000>;
		interrupts = <38 0>;

		flexpwm1_pwm0: pwm0 {
		compatible = "nxp,imx-pwm";
		index = <0>;
		interrupts = <34 0>;
		#pwm-cells = <2>;
		clocks = <&ccm IMX_CCM_PWM_CLK 0 0>;
		status = "disabled";
		};

		flexpwm1_pwm1: pwm1 {
		compatible = "nxp,imx-pwm";
		index = <1>;
		interrupts = <35 0>;
		#pwm-cells = <2>;
		clocks = <&ccm IMX_CCM_PWM_CLK 0 0>;
		status = "disabled";
		};

		flexpwm1_pwm2: pwm2 {
		compatible = "nxp,imx-pwm";
		index = <2>;
		interrupts = <36 0>;
		#pwm-cells = <2>;
		clocks = <&ccm IMX_CCM_PWM_CLK 0 0>;
		status = "disabled";
		};

		flexpwm1_pwm3: pwm3 {
		compatible = "nxp,imx-pwm";
		index = <3>;
		interrupts = <37 0>;
		#pwm-cells = <2>;
		clocks = <&ccm IMX_CCM_PWM_CLK 0 0>;
		status = "disabled";
		};
		};
		/* Remove FlexPWM2-4, they don't exist on RT1010 */
		/delete-node/ flexpwm@403e0000;
		/delete-node/ flexpwm@403e4000;
		/delete-node/ flexpwm@403e8000;

		/* Remove Ethernet, it does'nt exist on RT1010 */
		/delete-node/ ethernet@402d8000;

		/* Fixup USB it has different base addr and interrupt numbers on RT1010 */
		/delete-node/ usbd@402e0000;
		usb1: usbd@400e4000 {
		compatible = "nxp,mcux-usbd";
		reg = <0x400e4000 0x200>;
		interrupts = <25 1>;
		interrupt-names = "usb_otg";
		clocks = <&usbclk>;
		num-bidir-endpoints = <8>;
		usb-controller-index = "Ehci0";
		status = "disabled";
		};

		/* Remove USB2, it does'nt exist on RT1010 */
		/delete-node/ usbd@402e0200;

		/* Remove USDHC, they don't exist on RT1010 */
		/delete-node/ usdhc@402c0000;
		/delete-node/ usdhc@402c4000;

		/* Remove CSI, it does'nt exist on RT1010 */
		/delete-node/ csi@402bc000;

		/* Remove FLEXCAN, they don't exist on RT1010 */
		/delete-node/ can@401d0000;
		/delete-node/ can@401d4000;
		/delete-node/ can@401d8000;

		/* Remove WDOG2, it does'nt exist on RT1010 */
		/delete-node/ wdog@400d0000;

		/* Fix SAI1, 3, it has different base addr on RT1010 */
		/delete-node/ sai@40384000;
		/delete-node/ sai@4038c000;
		sai1: sai@401e0000 {
		compatible = "nxp,mcux-i2s";
		#address-cells = <1>;
		#size-cells = <0>;
		#pinmux-cells = <2>;
		reg = <0x401e0000 0x4000>;
		clocks = <&ccm IMX_CCM_SAI1_CLK 0x7C 18>;
		/* Audio PLL Output Frequency is determined by:
		* (Fref * (DIV_SELECT + NUM/DENOM)) / POST_DIV
		* = (24MHz * (32 + 77 / 100)) / 1 = 786.48 MHz
		*/
		pll-clocks = <&anatop 0x70 0xC000 0>,
		<&anatop 0x70 0x7F 32>,
		<&anatop 0x70 0x180000 1>,
		<&anatop 0x80 0x3FFFFFFF 77>,
		<&anatop 0x90 0x3FFFFFFF 100>;
		pll-clock-names = "src", "lp", "pd", "num", "den";
		/* The maximum input frequency into the SAI mclk input is 300MHz
		* Based on this requirement, pre-div must be at least 3
		* The pre-div and post-div are one less than the actual divide-by amount.
		* A pre-div value of 0x1 results in a pre-divider of
		* (1+1) = 2
		*/
		pre-div = <0x3>;
		podf = <0x0F>;
		pinmuxes = <&iomuxcgpr 0x4 0x80000>;
		interrupts = <56 0>;
		dmas = <&edma0 0 19>, <&edma0 0 20>;
		dma-names = "rx", "tx";
		/* This translates to SAIChannelMask (fsl_sai.c) and
		* cannot be 0
		*/
		nxp,tx-channel = <1>;
		nxp,tx-dma-channel = <0>;
		nxp,rx-dma-channel = <1>;
		status = "disabled";
		};

		sai3: sai@401e8000 {
		compatible = "nxp,mcux-i2s";
		#address-cells = <1>;
		#size-cells = <0>;
		#pinmux-cells = <2>;
		reg = <0x401e8000 0x4000>;
		clocks = <&ccm IMX_CCM_SAI3_CLK 0x7C 22>;
		pre-div = <0>;
		podf = <63>;
		pll-clocks = <&anatop 0x70 0xC000 0>,
		<&anatop 0x70 0x7F 32>,
		<&anatop 0x70 0x180000 1>,
		<&anatop 0x80 0x3FFFFFFF 77>,
		<&anatop 0x90 0x3FFFFFFF 100>;
		pll-clock-names = "src", "lp", "pd", "num", "den";
		pinmuxes = <&iomuxcgpr 0x4 0x200000>;
		interrupts = <58 0>, <59 0>;
		dmas = <&edma0 0 83>, <&edma0 0 84>;
		dma-names = "rx", "tx";
		nxp,tx-channel = <0>;
		nxp,tx-dma-channel = <5>;
		nxp,rx-dma-channel = <6>;
		status = "disabled";
		};

		/* Remove SAI2, it does'nt exist on RT1010 */
		/delete-node/ sai@40388000;
		};
		};

soc/arm/nxp_imx/rt/Kconfig.defconfig.series

+2 −0

Original line number	Diff line number	Diff line
		@@ -108,10 +108,12 @@ if CODE_FLEXSPI

		config FLASH_SIZE
		default $(dt_node_reg_size_int,/soc/spi@400cc000,1,K) if SOC_SERIES_IMX_RT11XX
		default $(dt_node_reg_size_int,/soc/spi@400a0000,1,K) if SOC_MIMXRT1011
		default $(dt_node_reg_size_int,/soc/spi@402a8000,1,K) if SOC_SERIES_IMX_RT10XX

		config FLASH_BASE_ADDRESS
		default $(dt_node_reg_addr_hex,/soc/spi@400cc000,1) if SOC_SERIES_IMX_RT11XX
		default $(dt_node_reg_addr_hex,/soc/spi@400a0000,1) if SOC_MIMXRT1011
		default $(dt_node_reg_addr_hex,/soc/spi@402a8000,1) if SOC_SERIES_IMX_RT10XX

		endif # CODE_FLEXSPI

Admin message