board: nrf: Fix nRF54LM20DK upstream Bluetooth Controller supported (43e8753f) · Commits · Wenxi XU / zephyr

boards/nordic/nrf54lm20dk/nrf54lm20a_cpuapp_common.dtsi

+1 −1

Changes for boards/nordic/nrf54lm20dk/nrf54lm20a_cpuapp_common.dtsi: 1 added line, 1 removed line.
Original line number	Diff line number	Diff line
		@@ -18,7 +18,7 @@
		zephyr,bt-c2h-uart = &uart20;
		zephyr,flash-controller = &rram_controller;
		zephyr,flash = &cpuapp_rram;
		zephyr,bt-hci = &bt_hci_sdc;
		zephyr,bt-hci = &bt_hci_controller;
		zephyr,ieee802154 = &ieee802154;
		};
		};

+1 −5

Changes for boards/nordic/nrf54lm20dk/nrf54lm20dk_nrf54lm20a_cpuapp.dts: 1 added line, 5 removed lines.
Original line number	Diff line number	Diff line
		@@ -18,12 +18,8 @@
		};
		};

		&bt_hci_sdc {
		status = "okay";
		};

		&bt_hci_controller {
		status = "disabled";
		status = "okay";
		};

		/* Get a node label for wi-fi spi to use in shield files */

+0 −5

Changes for dts/vendor/nordic/nrf54lm20a.dtsi: 0 added lines, 5 removed lines.
Original line number	Diff line number	Diff line
		@@ -277,11 +277,6 @@
		/* Note: In the nRF Connect SDK the SoftDevice Controller
		* is added and set as the default Bluetooth Controller.
		*/
		bt_hci_sdc: bt_hci_sdc {
		compatible = "nordic,bt-hci-sdc";
		status = "disabled";
		};

		bt_hci_controller: bt_hci_controller {
		compatible = "zephyr,bt-hci-ll-sw-split";
		status = "disabled";

0 → 100644

+12 −0

Changes for samples/bluetooth/hci_uart/boards/nrf54lm20dk_nrf54lm20a_cpuapp.overlay: 12 added lines, 0 removed lines.
Original line number	Diff line number	Diff line
		/*
		* Copyright (c) 2024 Nordic Semiconductor ASA
		*
		* SPDX-License-Identifier: Apache-2.0
		*/

		&uart20 {
		compatible = "nordic,nrf-uarte";
		current-speed = <1000000>;
		status = "okay";
		hw-flow-control;
		};

0 → 100644

+33 −0

Changes for samples/bluetooth/hci_uart/boards/nrf54lm20dk_nrf54lm20a_cpuapp_df.overlay: 33 added lines, 0 removed lines.
Original line number	Diff line number	Diff line
		/*
		* Copyright (c) 2024 Nordic Semiconductor ASA
		*
		* SPDX-License-Identifier: Apache-2.0
		*/

		&uart20 {
		compatible = "nordic,nrf-uarte";
		current-speed = <1000000>;
		status = "okay";
		hw-flow-control;
		};

		&radio {
		status = "okay";
		/* This is an example number of antennas that may be available
		* on antenna matrix board.
		*/
		dfe-antenna-num = <10>;
		/* This is an example switch pattern that will be used to set an
		* antenna for Tx PDU (period before start of Tx CTE).
		*/
		dfe-pdu-antenna = <0x0>;

		/* These are example GPIO pin numbers that are provided to
		* Radio peripheral. The pins will be acquired by Radio to
		* drive antenna switching when AoD is enabled.
		*/
		dfegpio0-gpios = <&gpio1 4 0>;
		dfegpio1-gpios = <&gpio1 5 0>;
		dfegpio2-gpios = <&gpio1 6 0>;
		dfegpio3-gpios = <&gpio1 7 0>;
		};