hippi: Move the HIPPI driver (ff5a3b50) · Commits · 戴 / test

MAINTAINERS

+1 −0

Original line number	Diff line number	Diff line
		@@ -3049,6 +3049,7 @@ S: Maintained
		F: include/linux/hippidevice.h
		F: include/linux/if_hippi.h
		F: net/802/hippi.c
		F: drivers/net/hippi/

		HOST AP DRIVER
		M: Jouni Malinen <j@w1.fi>

+0 −32

Original line number	Diff line number	Diff line
		@@ -272,38 +272,6 @@ config RIONET_RX_SIZE
		depends on RIONET
		default "128"

		config HIPPI
		bool "HIPPI driver support (EXPERIMENTAL)"
		depends on EXPERIMENTAL && INET && PCI
		help
		HIgh Performance Parallel Interface (HIPPI) is a 800Mbit/sec and
		1600Mbit/sec dual-simplex switched or point-to-point network. HIPPI
		can run over copper (25m) or fiber (300m on multi-mode or 10km on
		single-mode). HIPPI networks are commonly used for clusters and to
		connect to super computers. If you are connected to a HIPPI network
		and have a HIPPI network card in your computer that you want to use
		under Linux, say Y here (you must also remember to enable the driver
		for your HIPPI card below). Most people will say N here.

		config ROADRUNNER
		tristate "Essential RoadRunner HIPPI PCI adapter support (EXPERIMENTAL)"
		depends on HIPPI && PCI
		help
		Say Y here if this is your PCI HIPPI network card.

		To compile this driver as a module, choose M here: the module
		will be called rrunner. If unsure, say N.

		config ROADRUNNER_LARGE_RINGS
		bool "Use large TX/RX rings (EXPERIMENTAL)"
		depends on ROADRUNNER
		help
		If you say Y here, the RoadRunner driver will preallocate up to 2 MB
		of additional memory to allow for fastest operation, both for
		transmitting and receiving. This memory cannot be used by any other
		kernel code or by user space programs. Say Y here only if you have
		the memory.

		config PLIP
		tristate "PLIP (parallel port) support"
		depends on PARPORT

+1 −1

Original line number	Diff line number	Diff line
		@@ -13,7 +13,6 @@ obj-$(CONFIG_VMXNET3) += vmxnet3/
		# link order important here
		#
		obj-$(CONFIG_PLIP) += plip.o
		obj-$(CONFIG_ROADRUNNER) += rrunner.o
		obj-$(CONFIG_RIONET) += rionet.o

		#
		@@ -39,6 +38,7 @@ obj-$(CONFIG_VETH) += veth.o
		obj-$(CONFIG_DEV_APPLETALK) += appletalk/
		obj-$(CONFIG_ETHERNET) += ethernet/
		obj-$(CONFIG_FDDI) += fddi/
		obj-$(CONFIG_HIPPI) += hippi/
		onj-$(CONFIG_PPP) += ppp/
		obj-$(CONFIG_PPP_ASYNC) += ppp/
		obj-$(CONFIG_PPP_BSDCOMP) += ppp/

0 → 100644

+39 −0

Original line number	Diff line number	Diff line
		#
		# HIPPI network device configuration
		#

		config HIPPI
		bool "HIPPI driver support (EXPERIMENTAL)"
		depends on EXPERIMENTAL && INET && PCI
		---help---
		HIgh Performance Parallel Interface (HIPPI) is a 800Mbit/sec and
		1600Mbit/sec dual-simplex switched or point-to-point network. HIPPI
		can run over copper (25m) or fiber (300m on multi-mode or 10km on
		single-mode). HIPPI networks are commonly used for clusters and to
		connect to super computers. If you are connected to a HIPPI network
		and have a HIPPI network card in your computer that you want to use
		under Linux, say Y here (you must also remember to enable the driver
		for your HIPPI card below). Most people will say N here.

		if HIPPI

		config ROADRUNNER
		tristate "Essential RoadRunner HIPPI PCI adapter support (EXPERIMENTAL)"
		depends on PCI
		---help---
		Say Y here if this is your PCI HIPPI network card.

		To compile this driver as a module, choose M here: the module
		will be called rrunner. If unsure, say N.

		config ROADRUNNER_LARGE_RINGS
		bool "Use large TX/RX rings (EXPERIMENTAL)"
		depends on ROADRUNNER
		---help---
		If you say Y here, the RoadRunner driver will preallocate up to 2 MB
		of additional memory to allow for fastest operation, both for
		transmitting and receiving. This memory cannot be used by any other
		kernel code or by user space programs. Say Y here only if you have
		the memory.

		endif /* HIPPI */

0 → 100644

+5 −0

Original line number	Diff line number	Diff line
		#
		# Makefile for the HIPPI network device drivers.
		#

		obj-$(CONFIG_ROADRUNNER) += rrunner.o