Commit ff505930 authored by Stefan Popa's avatar Stefan Popa Committed by Jonathan Cameron
Browse files

iio: dac: ad5758: Add support for hard reset 



The ad5758 has a hardware reset active low input pin. This patch adds a
devicetree entry for a reset GPIO and a new ad5758_reset() function.
During
initialization, it is checked if the reset property is specified and the
the GPIO is being asserted, therefore the device will become active.

When the reset function is called, if the gpio_reset var is set, then
the
GPIO will be toggled, otherwise a software reset is performed.

Signed-off-by: default avatarStefan Popa <stefan.popa@analog.com>
Signed-off-by: default avatarJonathan Cameron <Jonathan.Cameron@huawei.com>
parent 1fc378fa

Documentation/devicetree/bindings/iio/dac/ad5758.txt

+5 −0
Original line number Diff line number Diff line
@@ -50,6 +50,9 @@ Required properties: 


Optional properties:



 - reset-gpios : GPIO spec for the RESET pin. If specified, it will be

		 asserted during driver probe.



 - adi,dc-dc-ilim-microamp: The dc-to-dc converter current limit

		   The following values are currently supported [uA]:

			* 150000
@@ -71,6 +74,8 @@ AD5758 Example: 
		spi-max-frequency = <1000000>;

		spi-cpha;



		reset-gpios = <&gpio 22 0>;



		adi,dc-dc-mode = <2>;

		adi,range-microvolt = <0 10000000>;

		adi,dc-dc-ilim-microamp = <200000>;

drivers/iio/dac/ad5758.c

+24 −2
Original line number Diff line number Diff line
@@ -12,6 +12,7 @@ 
#include <linux/module.h>

#include <linux/property.h>

#include <linux/spi/spi.h>

#include <linux/gpio/consumer.h>



#include <linux/iio/iio.h>

#include <linux/iio/sysfs.h>
@@ -108,6 +109,7 @@ struct ad5758_range { 
struct ad5758_state {

	struct spi_device *spi;

	struct mutex lock;

	struct gpio_desc *gpio_reset;

	struct ad5758_range out_range;

	unsigned int dc_dc_mode;

	unsigned int dc_dc_ilim;
@@ -474,6 +476,21 @@ static int ad5758_internal_buffers_en(struct ad5758_state *st, bool enable) 
					     AD5758_CAL_MEM_UNREFRESHED_MSK);

}



static int ad5758_reset(struct ad5758_state *st)

{

	if (st->gpio_reset) {

		gpiod_set_value(st->gpio_reset, 0);

		usleep_range(100, 1000);

		gpiod_set_value(st->gpio_reset, 1);

		usleep_range(100, 1000);



		return 0;

	} else {

		/* Perform a software reset */

		return ad5758_soft_reset(st);

	}

}



static int ad5758_reg_access(struct iio_dev *indio_dev,

			     unsigned int reg,

			     unsigned int writeval,
@@ -768,13 +785,18 @@ static int ad5758_init(struct ad5758_state *st) 
{

	int regval, ret;



	st->gpio_reset = devm_gpiod_get_optional(&st->spi->dev, "reset",

						 GPIOD_OUT_HIGH);

	if (IS_ERR(st->gpio_reset))

		return PTR_ERR(st->gpio_reset);



	/* Disable CRC checks */

	ret = ad5758_crc_disable(st);

	if (ret < 0)

		return ret;



	/* Perform a software reset */

	ret = ad5758_soft_reset(st);

	/* Perform a reset */

	ret = ad5758_reset(st);

	if (ret < 0)

		return ret;

CRA Git | Maintained and supported by SUSTech CRA and CCSE