Commit fc72053b authored by Linus Torvalds's avatar Linus Torvalds
Browse files

Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc 

Pull ARM SoC fixes and straggler patches from Olof Johansson:
 "A collection of fixes for fall out from 3.10 merge window, some build
  fixes and warning cleanups and a small handful of patches that were
  small and contained and made sense to still include in 3.10 (some of
  these have also been in -next since the merge window opened).

  Largest continous series is for OMAP, but there's a handful for other
  platforms.

  For i.MX, one of the patches are framebuffer fixups due to fallout
  during the merge window, and the other removes some stale and broken
  code."

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (34 commits)
  ARM: exynos: dts: Fixed vbus-gpios
  ARM: EXYNOS5: Fix kernel dump in AFTR idle mode
  ARM: ux500: Rid ignored return value of regulator_enable() compiler warning
  ARM: ux500: read the correct soc_id number
  ARM: exynos: dts: cros5250: add cyapa trackpad
  video: mxsfb: Adapt to new videomode API
  ARM: imx: Select GENERIC_ALLOCATOR
  ARM: imx: compile fix for hotplug.c
  ARM: dts: don't assume boards are using twl4030 for omap3
  ARM: OMAP2+: Remove bogus IS_ERR_OR_NULL checking from id.c
  ARM: dts: Configure and fix the McSPI pins for 4430sdp
  ARM: dts: AM33XX: Add GPMC node
  ARM: dts: OMAP4460: Fix CPU OPP voltages
  ARM: dts: OMAP36xx: Fix CPU OPP voltages
  ARM: OMAP4+: omap2plus_defconfig: Enable audio via TWL6040 as module
  ARM: OMAP2: AM33XX: id: Add support for new AM335x PG2.1 Si
  omap: mux: add AM/DM37x gpios
  ARM: OMAP1: DMA: fix error handling in omap1_system_dma_init()
  ARM: OMAP2+: omap_device: use late_initcall_sync
  ARM: OMAP: RX-51: change probe order of touchscreen and panel SPI devices
  ...
parents c61c48df c58c1a4c

Documentation/devicetree/bindings/mtd/gpmc-nand.txt

+14 −14
Original line number Diff line number Diff line
@@ -56,20 +56,20 @@ Example for an AM33xx board: 
			nand-bus-width = <16>;

			ti,nand-ecc-opt = "bch8";



			gpmc,sync-clk = <0>;

			gpmc,cs-on = <0>;

			gpmc,cs-rd-off = <44>;

			gpmc,cs-wr-off = <44>;

			gpmc,adv-on = <6>;

			gpmc,adv-rd-off = <34>;

			gpmc,adv-wr-off = <44>;

			gpmc,we-off = <40>;

			gpmc,oe-off = <54>;

			gpmc,access = <64>;

			gpmc,rd-cycle = <82>;

			gpmc,wr-cycle = <82>;

			gpmc,wr-access = <40>;

			gpmc,wr-data-mux-bus = <0>;

			gpmc,sync-clk-ps = <0>;

			gpmc,cs-on-ns = <0>;

			gpmc,cs-rd-off-ns = <44>;

			gpmc,cs-wr-off-ns = <44>;

			gpmc,adv-on-ns = <6>;

			gpmc,adv-rd-off-ns = <34>;

			gpmc,adv-wr-off-ns = <44>;

			gpmc,we-off-ns = <40>;

			gpmc,oe-off-ns = <54>;

			gpmc,access-ns = <64>;

			gpmc,rd-cycle-ns = <82>;

			gpmc,wr-cycle-ns = <82>;

			gpmc,wr-access-ns = <40>;

			gpmc,wr-data-mux-bus-ns = <0>;



			#address-cells = <1>;

			#size-cells = <1>;

Documentation/devicetree/bindings/net/gpmc-eth.txt

+28 −28
Original line number Diff line number Diff line
@@ -26,16 +26,16 @@ Required properties: 
- bank-width: 		Address width of the device in bytes. GPMC supports 8-bit

			and 16-bit devices and so must be either 1 or 2 bytes.

- compatible:		Compatible string property for the ethernet child device.

- gpmc,cs-on:		Chip-select assertion time

- gpmc,cs-rd-off:	Chip-select de-assertion time for reads

- gpmc,cs-wr-off:	Chip-select de-assertion time for writes

- gpmc,oe-on:		Output-enable assertion time

- gpmc,oe-off		Output-enable de-assertion time

- gpmc,we-on:		Write-enable assertion time

- gpmc,we-off:		Write-enable de-assertion time

- gpmc,access:		Start cycle to first data capture (read access)

- gpmc,rd-cycle:	Total read cycle time

- gpmc,wr-cycle:	Total write cycle time

- gpmc,cs-on-ns:	Chip-select assertion time

- gpmc,cs-rd-off-ns:	Chip-select de-assertion time for reads

- gpmc,cs-wr-off-ns:	Chip-select de-assertion time for writes

- gpmc,oe-on-ns:	Output-enable assertion time

- gpmc,oe-off-ns:	Output-enable de-assertion time

- gpmc,we-on-ns:	Write-enable assertion time

- gpmc,we-off-ns:	Write-enable de-assertion time

- gpmc,access-ns:	Start cycle to first data capture (read access)

- gpmc,rd-cycle-ns:	Total read cycle time

- gpmc,wr-cycle-ns:	Total write cycle time

- reg:			Chip-select, base address (relative to chip-select)

			and size of the memory mapped for the device.

			Note that base address will be typically 0 as this
@@ -65,24 +65,24 @@ gpmc: gpmc@6e000000 { 
		bank-width = <2>;



		gpmc,mux-add-data;

		gpmc,cs-on = <0>;

		gpmc,cs-rd-off = <186>;

		gpmc,cs-wr-off = <186>;

		gpmc,adv-on = <12>;

		gpmc,adv-rd-off = <48>;

		gpmc,adv-wr-off = <48>;

		gpmc,oe-on = <54>;

		gpmc,oe-off = <168>;

		gpmc,we-on = <54>;

		gpmc,we-off = <168>;

		gpmc,rd-cycle = <186>;

		gpmc,wr-cycle = <186>;

		gpmc,access = <114>;

		gpmc,page-burst-access = <6>;

		gpmc,bus-turnaround = <12>;

		gpmc,cycle2cycle-delay = <18>;

		gpmc,wr-data-mux-bus = <90>;

		gpmc,wr-access = <186>;

		gpmc,cs-on-ns = <0>;

		gpmc,cs-rd-off-ns = <186>;

		gpmc,cs-wr-off-ns = <186>;

		gpmc,adv-on-ns = <12>;

		gpmc,adv-rd-off-ns = <48>;

		gpmc,adv-wr-off-ns = <48>;

		gpmc,oe-on-ns = <54>;

		gpmc,oe-off-ns = <168>;

		gpmc,we-on-ns = <54>;

		gpmc,we-off-ns = <168>;

		gpmc,rd-cycle-ns = <186>;

		gpmc,wr-cycle-ns = <186>;

		gpmc,access-ns = <114>;

		gpmc,page-burst-access-ns = <6>;

		gpmc,bus-turnaround-ns = <12>;

		gpmc,cycle2cycle-delay-ns = <18>;

		gpmc,wr-data-mux-bus-ns = <90>;

		gpmc,wr-access-ns = <186>;

		gpmc,cycle2cycle-samecsen;

		gpmc,cycle2cycle-diffcsen;

arch/arm/Kconfig

+0 −1
Original line number Diff line number Diff line
@@ -897,7 +897,6 @@ config ARCH_MULTI_V7 
	bool "ARMv7 based platforms (Cortex-A, PJ4, Scorpion, Krait)"

	default y

	select ARCH_MULTI_V6_V7

	select ARCH_VEXPRESS

	select CPU_V7



config ARCH_MULTI_V6_V7

arch/arm/boot/dts/am33xx.dtsi

+12 −0
Original line number Diff line number Diff line
@@ -403,5 +403,17 @@ 
			       0x44d80000 0x2000>;	/* M3 DMEM */

			ti,hwmods = "wkup_m3";

		};



		gpmc: gpmc@50000000 {

			compatible = "ti,am3352-gpmc";

			ti,hwmods = "gpmc";

			reg = <0x50000000 0x2000>;

			interrupts = <100>;

			num-cs = <7>;

			num-waitpins = <2>;

			#address-cells = <2>;

			#size-cells = <1>;

			status = "disabled";

		};

	};

};

arch/arm/boot/dts/cros5250-common.dtsi

+8 −0
Original line number Diff line number Diff line
@@ -175,6 +175,14 @@ 
	i2c@12C70000 {

		samsung,i2c-sda-delay = <100>;

		samsung,i2c-max-bus-freq = <378000>;



		trackpad {

			reg = <0x67>;

			compatible = "cypress,cyapa";

			interrupts = <2 0>;

			interrupt-parent = <&gpx1>;

			wakeup-source;

		};

	};



	i2c@12C80000 {

CRA Git | Maintained and supported by SUSTech CRA and CCSE