ARM: at91: remove at91sam9260/at91sam9g20 legacy boards files

obj-$(CONFIG_MACH_CPUAT91)	+= board-cpuat91.o

obj-$(CONFIG_MACH_ECO920)	+= board-eco920.o

# AT91SAM9260 board-specific support

obj-$(CONFIG_MACH_AT91SAM9260EK) += board-sam9260ek.o

obj-$(CONFIG_MACH_CAM60)	+= board-cam60.o

obj-$(CONFIG_MACH_SAM9_L9260)	+= board-sam9-l9260.o

obj-$(CONFIG_MACH_AFEB9260)	+= board-afeb-9260v1.o

obj-$(CONFIG_MACH_CPU9260)	+= board-cpu9krea.o

obj-$(CONFIG_MACH_FLEXIBITY)	+= board-flexibity.o

# AT91SAM9261 board-specific support

obj-$(CONFIG_MACH_AT91SAM9261EK) += board-sam9261ek.o

obj-$(CONFIG_MACH_AT91SAM9G10EK) += board-sam9261ek.o

# AT91SAM9G20 board-specific support

obj-$(CONFIG_MACH_AT91SAM9G20EK) += board-sam9g20ek.o

obj-$(CONFIG_MACH_CPU9G20)	+= board-cpu9krea.o

obj-$(CONFIG_MACH_STAMP9G20)	+= board-stamp9g20.o

obj-$(CONFIG_MACH_PORTUXG20)	+= board-stamp9g20.o

obj-$(CONFIG_MACH_PCONTROL_G20)	+= board-pcontrol-g20.o board-stamp9g20.o

obj-$(CONFIG_MACH_GSIA18S)	+= board-gsia18s.o board-stamp9g20.o

# AT91SAM9260/AT91SAM9G20 board-specific support

obj-$(CONFIG_MACH_SNAPPER_9260)	+= board-snapper9260.o

# AT91SAM board with device-tree

obj-$(CONFIG_MACH_AT91RM9200_DT) += board-dt-rm9200.o

obj-$(CONFIG_MACH_AT91SAM9_DT) += board-dt-sam9.o

/*

 * linux/arch/arm/mach-at91/board-afeb-9260v1.c

 *

 *  Copyright (C) 2005 SAN People

 *  Copyright (C) 2006 Atmel

 *  Copyright (C) 2008 Sergey Lapin

 *

 * A custom board designed as open hardware; PCBs and various information

 * is available at http://groups.google.com/group/arm9fpga-evolution-board/

 * Subversion repository: svn://194.85.238.22/home/users/george/svn/arm9eb

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License as published by

 * the Free Software Foundation; either version 2 of the License, or

 * (at your option) any later version.

 *

 * This program is distributed in the hope that it will be useful,

 * but WITHOUT ANY WARRANTY; without even the implied warranty of

 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 * GNU General Public License for more details.

 *

 * You should have received a copy of the GNU General Public License

 * along with this program; if not, write to the Free Software

 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA

 */

#include <linux/types.h>

#include <linux/gpio.h>

#include <linux/init.h>

#include <linux/mm.h>

#include <linux/module.h>

#include <linux/platform_device.h>

#include <linux/spi/spi.h>

#include <linux/clk.h>

#include <linux/dma-mapping.h>

#include <mach/hardware.h>

#include <asm/setup.h>

#include <asm/mach-types.h>

#include <asm/irq.h>

#include <asm/mach/arch.h>

#include <asm/mach/map.h>

#include <asm/mach/irq.h>

#include "at91_aic.h"

#include "board.h"

#include "generic.h"

#include "gpio.h"

static void __init afeb9260_init_early(void)

{

	/* Initialize processor: 18.432 MHz crystal */

	at91_initialize(18432000);

}

/*

 * USB Host port

 */

static struct at91_usbh_data __initdata afeb9260_usbh_data = {

	.ports		= 1,

	.vbus_pin	= {-EINVAL, -EINVAL},

	.overcurrent_pin= {-EINVAL, -EINVAL},

};

/*

 * USB Device port

 */

static struct at91_udc_data __initdata afeb9260_udc_data = {

	.vbus_pin	= AT91_PIN_PC5,

	.pullup_pin	= -EINVAL,		/* pull-up driven by UDC */

};

/*

 * SPI devices.

 */

static struct spi_board_info afeb9260_spi_devices[] = {

	{	/* DataFlash chip */

		.modalias	= "mtd_dataflash",

		.chip_select	= 1,

		.max_speed_hz	= 15 * 1000 * 1000,

		.bus_num	= 0,

	},

};

/*

 * MACB Ethernet device

 */

static struct macb_platform_data __initdata afeb9260_macb_data = {

	.phy_irq_pin	= AT91_PIN_PA9,

	.is_rmii	= 0,

};

/*

 * NAND flash

 */

static struct mtd_partition __initdata afeb9260_nand_partition[] = {

	{

		.name	= "bootloader",

		.offset	= 0,

		.size	= (640 * SZ_1K),

	},

	{

		.name	= "kernel",

		.offset	= MTDPART_OFS_NXTBLK,

		.size	= SZ_2M,

	},

	{

		.name	= "rootfs",

		.offset	= MTDPART_OFS_NXTBLK,

		.size	= MTDPART_SIZ_FULL,

	},

};

static struct atmel_nand_data __initdata afeb9260_nand_data = {

	.ale		= 21,

	.cle		= 22,

	.rdy_pin	= AT91_PIN_PC13,

	.enable_pin	= AT91_PIN_PC14,

	.bus_width_16	= 0,

	.ecc_mode	= NAND_ECC_SOFT,

	.parts		= afeb9260_nand_partition,

	.num_parts	= ARRAY_SIZE(afeb9260_nand_partition),

	.det_pin	= -EINVAL,

};

/*

 * MCI (SD/MMC)

 */

static struct mci_platform_data __initdata afeb9260_mci0_data = {

	.slot[1] = {

		.bus_width	= 4,

		.detect_pin	= AT91_PIN_PC9,

		.wp_pin		= AT91_PIN_PC4,

	},

};

static struct i2c_board_info __initdata afeb9260_i2c_devices[] = {

	{

		I2C_BOARD_INFO("tlv320aic23", 0x1a),

	}, {

		I2C_BOARD_INFO("fm3130", 0x68),

	}, {

		I2C_BOARD_INFO("24c64", 0x50),

	},

};

/*

 * IDE (CF True IDE mode)

 */

static struct at91_cf_data afeb9260_cf_data = {

	.chipselect = 4,

	.irq_pin    = AT91_PIN_PA6,

	.det_pin	= -EINVAL,

	.vcc_pin	= -EINVAL,

	.rst_pin    = AT91_PIN_PA7,

	.flags      = AT91_CF_TRUE_IDE,

};

static void __init afeb9260_board_init(void)

{

	at91_register_devices();

	/* Serial */

	/* DBGU on ttyS0. (Rx & Tx only) */

	at91_register_uart(0, 0, 0);

	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */

	at91_register_uart(AT91SAM9260_ID_US0, 1,

			     ATMEL_UART_CTS | ATMEL_UART_RTS

			   | ATMEL_UART_DTR | ATMEL_UART_DSR

			   | ATMEL_UART_DCD | ATMEL_UART_RI);

	/* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */

	at91_register_uart(AT91SAM9260_ID_US1, 2,

			ATMEL_UART_CTS | ATMEL_UART_RTS);

	at91_add_device_serial();

	/* USB Host */

	at91_add_device_usbh(&afeb9260_usbh_data);

	/* USB Device */

	at91_add_device_udc(&afeb9260_udc_data);

	/* SPI */

	at91_add_device_spi(afeb9260_spi_devices,

			ARRAY_SIZE(afeb9260_spi_devices));

	/* NAND */

	at91_add_device_nand(&afeb9260_nand_data);

	/* Ethernet */

	at91_add_device_eth(&afeb9260_macb_data);

	/* Standard function's pin assignments are not

	 * appropriate for us and generic code provide

	 * no API to configure these pins any other way */

	at91_set_B_periph(AT91_PIN_PA10, 0);	/* ETX2 */

	at91_set_B_periph(AT91_PIN_PA11, 0);	/* ETX3 */

	/* MMC */

	at91_add_device_mci(0, &afeb9260_mci0_data);

	/* I2C */

	at91_add_device_i2c(afeb9260_i2c_devices,

			ARRAY_SIZE(afeb9260_i2c_devices));

	/* Audio */

	at91_add_device_ssc(AT91SAM9260_ID_SSC, ATMEL_SSC_TX);

	/* IDE */

	at91_add_device_cf(&afeb9260_cf_data);

}

MACHINE_START(AFEB9260, "Custom afeb9260 board")

	/* Maintainer: Sergey Lapin <slapin@ossfans.org> */

	.init_time	= at91_init_time,

	.map_io		= at91_map_io,

	.handle_irq	= at91_aic_handle_irq,

	.init_early	= afeb9260_init_early,

	.init_irq	= at91_init_irq_default,

	.init_machine	= afeb9260_board_init,

MACHINE_END

/*

 * KwikByte CAM60 (KB9260)

 *

 * based on board-sam9260ek.c

 *   Copyright (C) 2005 SAN People

 *   Copyright (C) 2006 Atmel

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License as published by

 * the Free Software Foundation; either version 2 of the License, or

 * (at your option) any later version.

 *

 * This program is distributed in the hope that it will be useful,

 * but WITHOUT ANY WARRANTY; without even the implied warranty of

 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 * GNU General Public License for more details.

 *

 * You should have received a copy of the GNU General Public License

 * along with this program; if not, write to the Free Software

 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA

 */

#include <linux/types.h>

#include <linux/gpio.h>

#include <linux/init.h>

#include <linux/mm.h>

#include <linux/module.h>

#include <linux/platform_device.h>

#include <linux/spi/spi.h>

#include <linux/spi/flash.h>

#include <mach/hardware.h>

#include <asm/setup.h>

#include <asm/mach-types.h>

#include <asm/irq.h>

#include <asm/mach/arch.h>

#include <asm/mach/map.h>

#include <asm/mach/irq.h>

#include <mach/at91sam9_smc.h>

#include "at91_aic.h"

#include "board.h"

#include "sam9_smc.h"

#include "generic.h"

#include "gpio.h"

static void __init cam60_init_early(void)

{

	/* Initialize processor: 10 MHz crystal */

	at91_initialize(10000000);

}

/*

 * USB Host

 */

static struct at91_usbh_data __initdata cam60_usbh_data = {

	.ports		= 1,

	.vbus_pin	= {-EINVAL, -EINVAL},

	.overcurrent_pin= {-EINVAL, -EINVAL},

};

/*

 * SPI devices.

 */

#if defined(CONFIG_MTD_DATAFLASH)

static struct mtd_partition cam60_spi_partitions[] = {

	{

		.name	= "BOOT1",

		.offset	= 0,

		.size	= 4 * 1056,

	},

	{

		.name	= "BOOT2",

		.offset	= MTDPART_OFS_NXTBLK,

		.size	= 256 * 1056,

	},

	{

		.name	= "kernel",

		.offset	= MTDPART_OFS_NXTBLK,

		.size	= 2222 * 1056,

	},

	{

		.name	= "file system",

		.offset	= MTDPART_OFS_NXTBLK,

		.size	= MTDPART_SIZ_FULL,

	},

};

static struct flash_platform_data cam60_spi_flash_platform_data = {

	.name		= "spi_flash",

	.parts		= cam60_spi_partitions,

	.nr_parts	= ARRAY_SIZE(cam60_spi_partitions)

};

#endif

static struct spi_board_info cam60_spi_devices[] __initdata = {

#if defined(CONFIG_MTD_DATAFLASH)

	{	/* DataFlash chip */

		.modalias	= "mtd_dataflash",

		.chip_select	= 0,

		.max_speed_hz	= 15 * 1000 * 1000,

		.bus_num	= 0,

		.platform_data	= &cam60_spi_flash_platform_data

	},

#endif

};

/*

 * MACB Ethernet device

 */

static struct macb_platform_data cam60_macb_data __initdata = {

	.phy_irq_pin	= AT91_PIN_PB5,

	.is_rmii	= 0,

};

/*

 * NAND Flash

 */

static struct mtd_partition __initdata cam60_nand_partition[] = {

	{

		.name	= "nand_fs",

		.offset	= 0,

		.size	= MTDPART_SIZ_FULL,

	},

};

static struct atmel_nand_data __initdata cam60_nand_data = {

	.ale		= 21,

	.cle		= 22,

	.det_pin	= -EINVAL,

	.rdy_pin	= AT91_PIN_PA9,

	.enable_pin	= AT91_PIN_PA7,

	.ecc_mode	= NAND_ECC_SOFT,

	.parts		= cam60_nand_partition,

	.num_parts	= ARRAY_SIZE(cam60_nand_partition),

};

static struct sam9_smc_config __initdata cam60_nand_smc_config = {

	.ncs_read_setup		= 0,

	.nrd_setup		= 1,

	.ncs_write_setup	= 0,

	.nwe_setup		= 1,

	.ncs_read_pulse		= 3,

	.nrd_pulse		= 3,

	.ncs_write_pulse	= 3,

	.nwe_pulse		= 3,

	.read_cycle		= 5,

	.write_cycle		= 5,

	.mode			= AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8,

	.tdf_cycles		= 2,

};

static void __init cam60_add_device_nand(void)

{

	/* configure chip-select 3 (NAND) */

	sam9_smc_configure(0, 3, &cam60_nand_smc_config);

	at91_add_device_nand(&cam60_nand_data);

}

static void __init cam60_board_init(void)

{

	at91_register_devices();

	/* Serial */

	/* DBGU on ttyS0. (Rx & Tx only) */

	at91_register_uart(0, 0, 0);

	at91_add_device_serial();

	/* SPI */

	at91_add_device_spi(cam60_spi_devices, ARRAY_SIZE(cam60_spi_devices));

	/* Ethernet */

	at91_add_device_eth(&cam60_macb_data);

	/* USB Host */

	/* enable USB power supply circuit */

	at91_set_gpio_output(AT91_PIN_PB18, 1);

	at91_add_device_usbh(&cam60_usbh_data);

	/* NAND */

	cam60_add_device_nand();

}

MACHINE_START(CAM60, "KwikByte CAM60")

	/* Maintainer: KwikByte */

	.init_time	= at91_init_time,

	.map_io		= at91_map_io,

	.handle_irq	= at91_aic_handle_irq,

	.init_early	= cam60_init_early,

	.init_irq	= at91_init_irq_default,

	.init_machine	= cam60_board_init,

MACHINE_END

/*

 * linux/arch/arm/mach-at91/board-cpu9krea.c

 *

 *  Copyright (C) 2005 SAN People

 *  Copyright (C) 2006 Atmel

 *  Copyright (C) 2009 Eric Benard - eric@eukrea.com

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License as published by

 * the Free Software Foundation; either version 2 of the License, or

 * (at your option) any later version.

 *

 * This program is distributed in the hope that it will be useful,

 * but WITHOUT ANY WARRANTY; without even the implied warranty of

 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 * GNU General Public License for more details.

 *

 * You should have received a copy of the GNU General Public License

 * along with this program; if not, write to the Free Software

 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA

 */

#include <linux/types.h>

#include <linux/gpio.h>

#include <linux/init.h>

#include <linux/mm.h>

#include <linux/module.h>

#include <linux/platform_device.h>

#include <linux/clk.h>

#include <linux/gpio_keys.h>

#include <linux/input.h>

#include <linux/mtd/physmap.h>

#include <asm/setup.h>

#include <asm/mach-types.h>

#include <asm/irq.h>

#include <asm/mach/arch.h>

#include <asm/mach/map.h>

#include <asm/mach/irq.h>

#include <mach/hardware.h>

#include <mach/at91sam9_smc.h>

#include <mach/at91sam9260_matrix.h>

#include <mach/at91_matrix.h>

#include "at91_aic.h"

#include "board.h"

#include "sam9_smc.h"

#include "generic.h"

#include "gpio.h"

static void __init cpu9krea_init_early(void)

{

	/* Initialize processor: 18.432 MHz crystal */

	at91_initialize(18432000);

}

/*

 * USB Host port

 */

static struct at91_usbh_data __initdata cpu9krea_usbh_data = {

	.ports		= 2,

	.vbus_pin	= {-EINVAL, -EINVAL},

	.overcurrent_pin= {-EINVAL, -EINVAL},

};

/*

 * USB Device port

 */

static struct at91_udc_data __initdata cpu9krea_udc_data = {

	.vbus_pin	= AT91_PIN_PC8,

	.pullup_pin	= -EINVAL,		/* pull-up driven by UDC */

};

/*

 * MACB Ethernet device

 */

static struct macb_platform_data __initdata cpu9krea_macb_data = {

	.phy_irq_pin	= -EINVAL,

	.is_rmii	= 1,

};

/*

 * NAND flash

 */

static struct atmel_nand_data __initdata cpu9krea_nand_data = {

	.ale		= 21,

	.cle		= 22,

	.rdy_pin	= AT91_PIN_PC13,

	.enable_pin	= AT91_PIN_PC14,

	.bus_width_16	= 0,

	.det_pin	= -EINVAL,

	.ecc_mode	= NAND_ECC_SOFT,

};

#ifdef CONFIG_MACH_CPU9260

static struct sam9_smc_config __initdata cpu9krea_nand_smc_config = {

	.ncs_read_setup		= 0,

	.nrd_setup		= 1,

	.ncs_write_setup	= 0,

	.nwe_setup		= 1,

	.ncs_read_pulse		= 3,

	.nrd_pulse		= 3,

	.ncs_write_pulse	= 3,

	.nwe_pulse		= 3,

	.read_cycle		= 5,

	.write_cycle		= 5,

	.mode			= AT91_SMC_READMODE | AT91_SMC_WRITEMODE

		| AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8,

	.tdf_cycles		= 2,

};

#else

static struct sam9_smc_config __initdata cpu9krea_nand_smc_config = {

	.ncs_read_setup		= 0,

	.nrd_setup		= 2,

	.ncs_write_setup	= 0,

	.nwe_setup		= 2,

	.ncs_read_pulse		= 4,

	.nrd_pulse		= 4,

	.ncs_write_pulse	= 4,

	.nwe_pulse		= 4,

	.read_cycle		= 7,

	.write_cycle		= 7,

	.mode			= AT91_SMC_READMODE | AT91_SMC_WRITEMODE

		| AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8,

	.tdf_cycles		= 3,

};

#endif

static void __init cpu9krea_add_device_nand(void)

{

	sam9_smc_configure(0, 3, &cpu9krea_nand_smc_config);

	at91_add_device_nand(&cpu9krea_nand_data);

}

/*

 * NOR flash

 */

static struct physmap_flash_data cpuat9260_nor_data = {

	.width		= 2,

};

#define NOR_BASE	AT91_CHIPSELECT_0

#define NOR_SIZE	SZ_64M

static struct resource nor_flash_resources[] = {

	{

		.start	= NOR_BASE,

		.end	= NOR_BASE + NOR_SIZE - 1,

		.flags	= IORESOURCE_MEM,

	}

};

static struct platform_device cpu9krea_nor_flash = {

	.name		= "physmap-flash",

	.id		= 0,

	.dev		= {

		.platform_data	= &cpuat9260_nor_data,

	},

	.resource	= nor_flash_resources,

	.num_resources	= ARRAY_SIZE(nor_flash_resources),

};

#ifdef CONFIG_MACH_CPU9260

static struct sam9_smc_config __initdata cpu9krea_nor_smc_config = {

	.ncs_read_setup		= 0,

	.nrd_setup		= 1,

	.ncs_write_setup	= 0,

	.nwe_setup		= 1,

	.ncs_read_pulse		= 10,

	.nrd_pulse		= 10,

	.ncs_write_pulse	= 6,

	.nwe_pulse		= 6,

	.read_cycle		= 12,

	.write_cycle		= 8,

	.mode			= AT91_SMC_READMODE | AT91_SMC_WRITEMODE

			| AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_BAT_WRITE

			| AT91_SMC_DBW_16,

	.tdf_cycles		= 2,

};

#else

static struct sam9_smc_config __initdata cpu9krea_nor_smc_config = {

	.ncs_read_setup		= 0,

	.nrd_setup		= 1,

	.ncs_write_setup	= 0,

	.nwe_setup		= 1,

	.ncs_read_pulse		= 13,

	.nrd_pulse		= 13,

	.ncs_write_pulse	= 8,

	.nwe_pulse		= 8,

	.read_cycle		= 15,

	.write_cycle		= 10,

	.mode			= AT91_SMC_READMODE | AT91_SMC_WRITEMODE

			| AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_BAT_WRITE

			| AT91_SMC_DBW_16,

	.tdf_cycles		= 2,

};

#endif

static __init void cpu9krea_add_device_nor(void)

{

	unsigned long csa;

	csa = at91_matrix_read(AT91_MATRIX_EBICSA);

	at91_matrix_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_VDDIOMSEL_3_3V);

	/* configure chip-select 0 (NOR) */

	sam9_smc_configure(0, 0, &cpu9krea_nor_smc_config);

	platform_device_register(&cpu9krea_nor_flash);

}

/*

 * LEDs

 */

static struct gpio_led cpu9krea_leds[] = {

	{	/* LED1 */

		.name			= "LED1",

		.gpio			= AT91_PIN_PC11,

		.active_low		= 1,

		.default_trigger	= "timer",

	},

	{	/* LED2 */

		.name			= "LED2",

		.gpio			= AT91_PIN_PC12,

		.active_low		= 1,

		.default_trigger	= "heartbeat",

	},

	{	/* LED3 */

		.name			= "LED3",

		.gpio			= AT91_PIN_PC7,

		.active_low		= 1,

		.default_trigger	= "none",

	},

	{	/* LED4 */

		.name			= "LED4",

		.gpio			= AT91_PIN_PC9,

		.active_low		= 1,

		.default_trigger	= "none",

	}

};

static struct i2c_board_info __initdata cpu9krea_i2c_devices[] = {

	{

		I2C_BOARD_INFO("ds1339", 0x68),

	},

};

/*

 * GPIO Buttons

 */

#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)

static struct gpio_keys_button cpu9krea_buttons[] = {

	{

		.gpio		= AT91_PIN_PC3,

		.code		= BTN_0,

		.desc		= "BP1",

		.active_low	= 1,

		.wakeup		= 1,

	},

	{

		.gpio		= AT91_PIN_PB20,

		.code		= BTN_1,

		.desc		= "BP2",

		.active_low	= 1,

		.wakeup		= 1,

	}

};

static struct gpio_keys_platform_data cpu9krea_button_data = {

	.buttons	= cpu9krea_buttons,

	.nbuttons	= ARRAY_SIZE(cpu9krea_buttons),

};

static struct platform_device cpu9krea_button_device = {

	.name		= "gpio-keys",

	.id		= -1,

	.num_resources	= 0,

	.dev		= {

		.platform_data	= &cpu9krea_button_data,

	}

};

static void __init cpu9krea_add_device_buttons(void)

{

	at91_set_gpio_input(AT91_PIN_PC3, 1);	/* BP1 */

	at91_set_deglitch(AT91_PIN_PC3, 1);

	at91_set_gpio_input(AT91_PIN_PB20, 1);	/* BP2 */

	at91_set_deglitch(AT91_PIN_PB20, 1);

	platform_device_register(&cpu9krea_button_device);

}

#else

static void __init cpu9krea_add_device_buttons(void)

{

}

#endif

/*

 * MCI (SD/MMC)

 */

static struct mci_platform_data __initdata cpu9krea_mci0_data = {

	.slot[0] = {

		.bus_width	= 4,

		.detect_pin	= AT91_PIN_PA29,

		.wp_pin		= -EINVAL,

	},

};

static void __init cpu9krea_board_init(void)

{

	at91_register_devices();

	/* NOR */

	cpu9krea_add_device_nor();

	/* Serial */

	/* DGBU on ttyS0. (Rx & Tx only) */

	at91_register_uart(0, 0, 0);

	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */

	at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS |