Commit fb0f8fbf authored by Keith Packard's avatar Keith Packard
Browse files

drm/i915: Generate 2MHz clock for display port aux channel I/O. Retry I/O. 



The display port aux channel clock is taken from the hrawclk value, which is
provided to the chip as the FSB frequency (as far as I can determine). The
strapping values for that are available in the CLKCFG register, now used to
select an appropriate divider to generate a 2MHz clock.

In addition, the DisplayPort spec requires that each aux channel I/O be
retried 'at least 3 times' in case the sink is idle when the first request
comes in.

Signed-off-by: default avatarKeith Packard <keithp@keithp.com>
parent a5b3da54

drivers/gpu/drm/i915/intel_dp.c

+70 −32
Original line number Diff line number Diff line
@@ -154,6 +154,36 @@ unpack_aux(uint32_t src, uint8_t *dst, int dst_bytes) 
		dst[i] = src >> ((3-i) * 8);

}



/* hrawclock is 1/4 the FSB frequency */

static int

intel_hrawclk(struct drm_device *dev)

{

	struct drm_i915_private *dev_priv = dev->dev_private;

	uint32_t clkcfg;



	clkcfg = I915_READ(CLKCFG);

	switch (clkcfg & CLKCFG_FSB_MASK) {

	case CLKCFG_FSB_400:

		return 100;

	case CLKCFG_FSB_533:

		return 133;

	case CLKCFG_FSB_667:

		return 166;

	case CLKCFG_FSB_800:

		return 200;

	case CLKCFG_FSB_1067:

		return 266;

	case CLKCFG_FSB_1333:

		return 333;

	/* these two are just a guess; one of them might be right */

	case CLKCFG_FSB_1600:

	case CLKCFG_FSB_1600_ALT:

		return 400;

	default:

		return 133;

	}

}



static int

intel_dp_aux_ch(struct intel_output *intel_output,

		uint8_t *send, int send_bytes,
@@ -169,7 +199,16 @@ intel_dp_aux_ch(struct intel_output *intel_output, 
	int recv_bytes;

	uint32_t ctl;

	uint32_t status;

	uint32_t aux_clock_divider;

	int try;



	/* The clock divider is based off the hrawclk,

	 * and would like to run at 2MHz. So, take the

	 * hrawclk value and divide by 2 and use that

	 */

	aux_clock_divider = intel_hrawclk(dev) / 2;

	/* Must try at least 3 times according to DP spec */

	for (try = 0; try < 5; try++) {

		/* Load the send data into the aux channel data registers */

		for (i = 0; i < send_bytes; i += 4) {

			uint32_t    d = pack_aux(send + i, send_bytes - i);;
@@ -177,16 +216,12 @@ intel_dp_aux_ch(struct intel_output *intel_output, 
			I915_WRITE(ch_data + i, d);

		}

	

	/* The clock divider is based off the hrawclk,

	 * and would like to run at 2MHz. The 133 below assumes

	 * a 266MHz hrawclk; need to figure out how we're supposed

	 * to know what hrawclk is...

	 */

		ctl = (DP_AUX_CH_CTL_SEND_BUSY |

	       DP_AUX_CH_CTL_TIME_OUT_1600us |

		       DP_AUX_CH_CTL_TIME_OUT_400us |

		       (send_bytes << DP_AUX_CH_CTL_MESSAGE_SIZE_SHIFT) |

		       (5 << DP_AUX_CH_CTL_PRECHARGE_2US_SHIFT) |

	       (133 << DP_AUX_CH_CTL_BIT_CLOCK_2X_SHIFT) |

		       (aux_clock_divider << DP_AUX_CH_CTL_BIT_CLOCK_2X_SHIFT) |

		       DP_AUX_CH_CTL_DONE |

		       DP_AUX_CH_CTL_TIME_OUT_ERROR |

		       DP_AUX_CH_CTL_RECEIVE_ERROR);
@@ -206,6 +241,9 @@ intel_dp_aux_ch(struct intel_output *intel_output, 
				DP_AUX_CH_CTL_TIME_OUT_ERROR |

				DP_AUX_CH_CTL_RECEIVE_ERROR));

		(void) I915_READ(ch_ctl);

		if ((status & DP_AUX_CH_CTL_TIME_OUT_ERROR) == 0)

			break;

	}



	if ((status & DP_AUX_CH_CTL_DONE) == 0) {

		printk(KERN_ERR "dp_aux_ch not done status 0x%08x\n", status);

CRA Git | Maintained and supported by SUSTech CRA and CCSE