Commit f96ed261 authored by Linus Torvalds's avatar Linus Torvalds
Browse files

Merge branch 'for-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata 

Pull libata updates from Tejun Heo:
 - Write same support added
 - Minor ahci MSIX irq handling updates
 - Non-critical SCSI command translation fixes
 - Controller specific changes

* 'for-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
  ahci: qoriq: Revert "ahci: qoriq: Disable NCQ on ls2080a SoC"
  libata: remove <asm-generic/libata-portmap.h>
  libata: remove unused definitions from <asm/libata-portmap.h>
  pata_at91: Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR
  ata: Replace BUG() with BUG_ON().
  ata: sata_mv: Replacing dma_pool_alloc and memset with a single call dma_pool_zalloc.
  libata: Some drives failing on SCT Write Same
  ahci: use pci_alloc_irq_vectors
  libata: SCT Write Same handle ATA_DFLAG_PIO
  libata: SCT Write Same / DSM Trim
  libata: Add support for SCT Write Same
  libata: Safely overwrite attached page in WRITE SAME xlat
  ahci: also use a per-port lock for the multi-MSIX case
  ARM: dts: STiH407-family: Add ports-implemented property in sata nodes
  ahci: st: Add ports-implemented property in support
  ahci: qoriq: enable snoopable sata read and write
  ahci: qoriq: adjust sata parameter
  libata-scsi: fix MODE SELECT translation for Control mode page
  libata-scsi: use u8 array to store mode page copy
parents b56061b0 1ce788d2

arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi

+2 −1
Original line number Diff line number Diff line
@@ -502,10 +502,11 @@ 
		};



		sata: sata@3200000 {

			compatible = "fsl,ls1043a-ahci", "fsl,ls1021a-ahci";

			compatible = "fsl,ls1043a-ahci";

			reg = <0x0 0x3200000 0x0 0x10000>;

			interrupts = <0 69 0x4>;

			clocks = <&clockgen 4 0>;

			dma-coherent;

		};



		msi1: msi-controller1@1571000 {

arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi

+2 −0
Original line number Diff line number Diff line
@@ -683,6 +683,7 @@ 
			reg = <0x0 0x3200000 0x0 0x10000>;

			interrupts = <0 133 0x4>; /* Level high type */

			clocks = <&clockgen 4 3>;

			dma-coherent;

		};



		sata1: sata@3210000 {
@@ -691,6 +692,7 @@ 
			reg = <0x0 0x3210000 0x0 0x10000>;

			interrupts = <0 136 0x4>; /* Level high type */

			clocks = <&clockgen 4 3>;

			dma-coherent;

		};



		usb0: usb3@3100000 {

arch/ia64/include/asm/libata-portmap.h

+0 −4
Original line number Diff line number Diff line 
#ifndef __ASM_IA64_LIBATA_PORTMAP_H

#define __ASM_IA64_LIBATA_PORTMAP_H



#define ATA_PRIMARY_CMD		0x1F0

#define ATA_PRIMARY_CTL		0x3F6

#define ATA_PRIMARY_IRQ(dev)	isa_irq_to_vector(14)



#define ATA_SECONDARY_CMD	0x170

#define ATA_SECONDARY_CTL	0x376

#define ATA_SECONDARY_IRQ(dev)	isa_irq_to_vector(15)



#endif

arch/powerpc/include/asm/libata-portmap.h

+0 −4
Original line number Diff line number Diff line 
#ifndef __ASM_POWERPC_LIBATA_PORTMAP_H

#define __ASM_POWERPC_LIBATA_PORTMAP_H



#define ATA_PRIMARY_CMD	0x1F0

#define ATA_PRIMARY_CTL	0x3F6

#define ATA_PRIMARY_IRQ(dev)	pci_get_legacy_ide_irq(dev, 0)



#define ATA_SECONDARY_CMD	0x170

#define ATA_SECONDARY_CTL	0x376

#define ATA_SECONDARY_IRQ(dev)	pci_get_legacy_ide_irq(dev, 1)



#endif

drivers/ata/ahci.c

+32 −117
Original line number Diff line number Diff line
@@ -1400,142 +1400,56 @@ static irqreturn_t ahci_thunderx_irq_handler(int irq, void *dev_instance) 
}

#endif



/*

 * ahci_init_msix() - optionally enable per-port MSI-X otherwise defer

 * to single msi.

 */

static int ahci_init_msix(struct pci_dev *pdev, unsigned int n_ports,

			  struct ahci_host_priv *hpriv, unsigned long flags)

static int ahci_get_irq_vector(struct ata_host *host, int port)

{

	int nvec, i, rc;



	/* Do not init MSI-X if MSI is disabled for the device */

	if (hpriv->flags & AHCI_HFLAG_NO_MSI)

		return -ENODEV;



	nvec = pci_msix_vec_count(pdev);

	if (nvec < 0)

		return nvec;



	/*

	 * Proper MSI-X implementations will have a vector per-port.

	 * Barring that, we prefer single-MSI over single-MSIX.  If this

	 * check fails (not enough MSI-X vectors for all ports) we will

	 * be called again with the flag clear iff ahci_init_msi()

	 * fails.

	 */

	if (flags & AHCI_HFLAG_MULTI_MSIX) {

		if (nvec < n_ports)

			return -ENODEV;

		nvec = n_ports;

	} else if (nvec) {

		nvec = 1;

	} else {

		/*

		 * Emit dev_err() since this was the non-legacy irq

		 * method of last resort.

		 */

		rc = -ENODEV;

		goto fail;

	}



	for (i = 0; i < nvec; i++)

		hpriv->msix[i].entry = i;

	rc = pci_enable_msix_exact(pdev, hpriv->msix, nvec);

	if (rc < 0)

		goto fail;



	if (nvec > 1)

		hpriv->flags |= AHCI_HFLAG_MULTI_MSIX;

	hpriv->irq = hpriv->msix[0].vector; /* for single msi-x */



	return nvec;

fail:

	dev_err(&pdev->dev,

		"failed to enable MSI-X with error %d, # of vectors: %d\n",

		rc, nvec);



	return rc;

	return pci_irq_vector(to_pci_dev(host->dev), port);

}



static int ahci_init_msi(struct pci_dev *pdev, unsigned int n_ports,

			struct ahci_host_priv *hpriv)

{

	int rc, nvec;

	int nvec;



	if (hpriv->flags & AHCI_HFLAG_NO_MSI)

		return -ENODEV;



	nvec = pci_msi_vec_count(pdev);

	if (nvec < 0)

		return nvec;



	/*

	 * If number of MSIs is less than number of ports then Sharing Last

	 * Message mode could be enforced. In this case assume that advantage

	 * of multipe MSIs is negated and use single MSI mode instead.

	 */

	if (nvec < n_ports)

		goto single_msi;



	rc = pci_enable_msi_exact(pdev, nvec);

	if (rc == -ENOSPC)

		goto single_msi;

	if (rc < 0)

		return rc;



	/* fallback to single MSI mode if the controller enforced MRSM mode */

	if (readl(hpriv->mmio + HOST_CTL) & HOST_MRSM) {

		pci_disable_msi(pdev);

		printk(KERN_INFO "ahci: MRSM is on, fallback to single MSI\n");

		goto single_msi;

	}



	if (nvec > 1)

	nvec = pci_alloc_irq_vectors(pdev, n_ports, INT_MAX,

			PCI_IRQ_MSIX | PCI_IRQ_MSI);

	if (nvec > 0) {

		if (!(readl(hpriv->mmio + HOST_CTL) & HOST_MRSM)) {

			hpriv->get_irq_vector = ahci_get_irq_vector;

			hpriv->flags |= AHCI_HFLAG_MULTI_MSI;



	goto out;



single_msi:

	nvec = 1;



	rc = pci_enable_msi(pdev);

	if (rc < 0)

		return rc;

out:

	hpriv->irq = pdev->irq;



			return nvec;

		}



static int ahci_init_interrupts(struct pci_dev *pdev, unsigned int n_ports,

				struct ahci_host_priv *hpriv)

{

	int nvec;



		/*

	 * Try to enable per-port MSI-X.  If the host is not capable

	 * fall back to single MSI before finally attempting single

	 * MSI-X.

		 * Fallback to single MSI mode if the controller enforced MRSM

		 * mode.

		 */

	nvec = ahci_init_msix(pdev, n_ports, hpriv, AHCI_HFLAG_MULTI_MSIX);

	if (nvec >= 0)

		return nvec;

		printk(KERN_INFO "ahci: MRSM is on, fallback to single MSI\n");

		pci_free_irq_vectors(pdev);

	}



	nvec = ahci_init_msi(pdev, n_ports, hpriv);

	if (nvec >= 0)

	/*

	 * -ENOSPC indicated we don't have enough vectors.  Don't bother trying

	 * a single vectors for any other error:

	 */

	if (nvec < 0 && nvec != -ENOSPC)

		return nvec;



	/* try single-msix */

	nvec = ahci_init_msix(pdev, n_ports, hpriv, 0);

	if (nvec >= 0)

	/*

	 * If the host is not capable of supporting per-port vectors, fall

	 * back to single MSI before finally attempting single MSI-X.

	 */

	nvec = pci_alloc_irq_vectors(pdev, 1, 1, PCI_IRQ_MSI);

	if (nvec == 1)

		return nvec;



	/* legacy intx interrupts */

	pci_intx(pdev, 1);

	hpriv->irq = pdev->irq;



	return 0;

	return pci_alloc_irq_vectors(pdev, 1, 1, PCI_IRQ_MSIX);

}



static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
@@ -1698,11 +1612,12 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) 
	if (!host)

		return -ENOMEM;

	host->private_data = hpriv;

	hpriv->msix = devm_kzalloc(&pdev->dev,

			sizeof(struct msix_entry) * n_ports, GFP_KERNEL);

	if (!hpriv->msix)

		return -ENOMEM;

	ahci_init_interrupts(pdev, n_ports, hpriv);



	if (ahci_init_msi(pdev, n_ports, hpriv) < 0) {

		/* legacy intx interrupts */

		pci_intx(pdev, 1);

	}

	hpriv->irq = pdev->irq;



	if (!(hpriv->cap & HOST_CAP_SSS) || ahci_ignore_sss)

		host->flags |= ATA_HOST_PARALLEL_SCAN;

CRA Git | Maintained and supported by SUSTech CRA and CCSE