Commit f8703dc8 authored by Richard Purdie's avatar Richard Purdie Committed by Russell King
Browse files

[ARM] 3564/1: sharpsl_pm: Abstract some machine specific parameters 



Patch from Richard Purdie

Abstract some machine specific parameters from the sharpsl_pm core
into the machine specific drivers. This allows the core to support
tosa/poodle.

Signed-off-by: default avatarRichard Purdie <rpurdie@rpsys.net>
Signed-off-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
parent 88660351

arch/arm/common/sharpsl_pm.c

+11 −17
Original line number Diff line number Diff line
@@ -49,13 +49,6 @@ 
#define SHARPSL_CHARGE_CO_CHECK_TIME           5   /* 5 msec */

#define SHARPSL_CHARGE_RETRY_CNT               1   /* eqv. 10 min */



#define SHARPSL_CHARGE_ON_VOLT         0x99  /* 2.9V */

#define SHARPSL_CHARGE_ON_TEMP         0xe0  /* 2.9V */

#define SHARPSL_CHARGE_ON_ACIN_HIGH    0x9b  /* 6V */

#define SHARPSL_CHARGE_ON_ACIN_LOW     0x34  /* 2V */

#define SHARPSL_FATAL_ACIN_VOLT        182   /* 3.45V */

#define SHARPSL_FATAL_NOACIN_VOLT      170   /* 3.40V */



/*

 * Prototypes

 */
@@ -82,12 +75,13 @@ DEFINE_LED_TRIGGER(sharpsl_charge_led_trigger); 
static int get_percentage(int voltage)

{

	int i = sharpsl_pm.machinfo->bat_levels - 1;

	int bl_status = sharpsl_pm.machinfo->backlight_get_status ? sharpsl_pm.machinfo->backlight_get_status() : 0;

	struct battery_thresh *thresh;



	if (sharpsl_pm.charge_mode == CHRG_ON)

		thresh=sharpsl_pm.machinfo->bat_levels_acin;

		thresh = bl_status ? sharpsl_pm.machinfo->bat_levels_acin_bl : sharpsl_pm.machinfo->bat_levels_acin;

	else

		thresh=sharpsl_pm.machinfo->bat_levels_noac;

		thresh = bl_status ? sharpsl_pm.machinfo->bat_levels_noac_bl : sharpsl_pm.machinfo->bat_levels_noac;



	while (i > 0 && (voltage > thresh[i].voltage))

		i--;
@@ -131,7 +125,7 @@ static void sharpsl_battery_thread(void *private_) 
	sharpsl_pm.battstat.ac_status = (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN) ? APM_AC_ONLINE : APM_AC_OFFLINE);



	/* Corgi cannot confirm when battery fully charged so periodically kick! */

	if (machine_is_corgi() && (sharpsl_pm.charge_mode == CHRG_ON)

	if (!sharpsl_pm.machinfo->batfull_irq && (sharpsl_pm.charge_mode == CHRG_ON)

			&& time_after(jiffies, sharpsl_pm.charge_start_time +  SHARPSL_CHARGE_ON_TIME_INTERVAL))

		schedule_work(&toggle_charger);
@@ -166,11 +160,11 @@ static void sharpsl_battery_thread(void *private_) 
			&& ((sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_LOW) ||

			(sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_CRITICAL))) {

		if (!(sharpsl_pm.flags & SHARPSL_BL_LIMIT)) {

			corgibl_limit_intensity(1);

			sharpsl_pm.machinfo->backlight_limit(1);

			sharpsl_pm.flags |= SHARPSL_BL_LIMIT;

		}

	} else if (sharpsl_pm.flags & SHARPSL_BL_LIMIT) {

		corgibl_limit_intensity(0);

		sharpsl_pm.machinfo->backlight_limit(0);

		sharpsl_pm.flags &= ~SHARPSL_BL_LIMIT;

	}
@@ -418,7 +412,7 @@ static int sharpsl_check_battery_temp(void) 
	val = get_select_val(buff);



	dev_dbg(sharpsl_pm.dev, "Temperature: %d\n", val);

	if (val > SHARPSL_CHARGE_ON_TEMP)

	if (val > sharpsl_pm.machinfo->charge_on_temp)

		return -1;



	return 0;
@@ -450,7 +444,7 @@ static int sharpsl_check_battery_voltage(void) 
	val = get_select_val(buff);

	dev_dbg(sharpsl_pm.dev, "Battery Voltage: %d\n", val);



	if (val < SHARPSL_CHARGE_ON_VOLT)

	if (val < sharpsl_pm.machinfo->charge_on_volt)

		return -1;



	return 0;
@@ -468,7 +462,7 @@ static int sharpsl_ac_check(void) 
	temp = get_select_val(buff);

	dev_dbg(sharpsl_pm.dev, "AC Voltage: %d\n",temp);



	if ((temp > SHARPSL_CHARGE_ON_ACIN_HIGH) || (temp < SHARPSL_CHARGE_ON_ACIN_LOW)) {

	if ((temp > sharpsl_pm.machinfo->charge_acin_high) || (temp < sharpsl_pm.machinfo->charge_acin_low)) {

		dev_err(sharpsl_pm.dev, "Error: AC check failed.\n");

		return -1;

	}
@@ -627,8 +621,8 @@ static int sharpsl_fatal_check(void) 
	temp = get_select_val(buff);

	dev_dbg(sharpsl_pm.dev, "sharpsl_fatal_check: acin: %d, discharge voltage: %d, no discharge: %d\n", acin, temp, sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT));



	if ((acin && (temp < SHARPSL_FATAL_ACIN_VOLT)) ||

			(!acin && (temp < SHARPSL_FATAL_NOACIN_VOLT)))

	if ((acin && (temp < sharpsl_pm.machinfo->fatal_acin_volt)) ||

			(!acin && (temp < sharpsl_pm.machinfo->fatal_noacin_volt)))

		return -1;

	return 0;

}

arch/arm/mach-pxa/corgi_pm.c

+20 −3
Original line number Diff line number Diff line
@@ -27,6 +27,13 @@ 
#include <asm/arch/pxa-regs.h>

#include "sharpsl.h"



#define SHARPSL_CHARGE_ON_VOLT         0x99  /* 2.9V */

#define SHARPSL_CHARGE_ON_TEMP         0xe0  /* 2.9V */

#define SHARPSL_CHARGE_ON_ACIN_HIGH    0x9b  /* 6V */

#define SHARPSL_CHARGE_ON_ACIN_LOW     0x34  /* 2V */

#define SHARPSL_FATAL_ACIN_VOLT        182   /* 3.45V */

#define SHARPSL_FATAL_NOACIN_VOLT      170   /* 3.40V */



static void corgi_charger_init(void)

{

	pxa_gpio_mode(CORGI_GPIO_ADC_TEMP_ON | GPIO_OUT);
@@ -195,6 +202,13 @@ static struct sharpsl_charger_machinfo corgi_pm_machinfo = { 
	.read_devdata    = corgipm_read_devdata,

	.charger_wakeup  = corgi_charger_wakeup,

	.should_wakeup   = corgi_should_wakeup,

	.backlight_limit = corgibl_limit_intensity,

	.charge_on_volt	  = SHARPSL_CHARGE_ON_VOLT,

	.charge_on_temp	  = SHARPSL_CHARGE_ON_TEMP,

	.charge_acin_high = SHARPSL_CHARGE_ON_ACIN_HIGH,

	.charge_acin_low  = SHARPSL_CHARGE_ON_ACIN_LOW,

	.fatal_acin_volt  = SHARPSL_FATAL_ACIN_VOLT,

	.fatal_noacin_volt= SHARPSL_FATAL_NOACIN_VOLT,

	.bat_levels       = 40,

	.bat_levels_noac  = spitz_battery_levels_noac,

	.bat_levels_acin  = spitz_battery_levels_acin,
@@ -214,6 +228,9 @@ static int __devinit corgipm_init(void) 
	if (!corgipm_device)

		return -ENOMEM;



	if (!machine_is_corgi())

	    corgi_pm_machinfo.batfull_irq = 1;



	corgipm_device->dev.platform_data = &corgi_pm_machinfo;

	ret = platform_device_add(corgipm_device);

arch/arm/mach-pxa/sharpsl_pm.c

+5 −2
Original line number Diff line number Diff line
@@ -128,6 +128,9 @@ struct battery_thresh spitz_battery_levels_noac[] = { 
 */

int sharpsl_pm_pxa_read_max1111(int channel)

{

	if (machine_is_tosa()) // Ugly, better move this function into another module

	    return 0;



	return corgi_ssp_max1111_get((channel << MAXCTRL_SEL_SH) | MAXCTRL_PD0 | MAXCTRL_PD1

			| MAXCTRL_SGL | MAXCTRL_UNI | MAXCTRL_STR);

}
@@ -156,7 +159,7 @@ void sharpsl_pm_pxa_init(void) 
		else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal),IRQT_FALLING);

	}



	if (!machine_is_corgi())

	if (sharpsl_pm.machinfo->batfull_irq)

	{

		/* Register interrupt handler. */

		if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull), sharpsl_chrg_full_isr, SA_INTERRUPT, "CO", sharpsl_chrg_full_isr)) {
@@ -174,6 +177,6 @@ void sharpsl_pm_pxa_remove(void) 
	if (sharpsl_pm.machinfo->gpio_fatal)

		free_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal), sharpsl_fatal_isr);



	if (!machine_is_corgi())

	if (sharpsl_pm.machinfo->batfull_irq)

		free_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull), sharpsl_chrg_full_isr);

}

arch/arm/mach-pxa/spitz_pm.c

+15 −0
Original line number Diff line number Diff line
@@ -27,6 +27,13 @@ 
#include <asm/arch/pxa-regs.h>

#include "sharpsl.h"



#define SHARPSL_CHARGE_ON_VOLT         0x99  /* 2.9V */

#define SHARPSL_CHARGE_ON_TEMP         0xe0  /* 2.9V */

#define SHARPSL_CHARGE_ON_ACIN_HIGH    0x9b  /* 6V */

#define SHARPSL_CHARGE_ON_ACIN_LOW     0x34  /* 2V */

#define SHARPSL_FATAL_ACIN_VOLT        182   /* 3.45V */

#define SHARPSL_FATAL_NOACIN_VOLT      170   /* 3.40V */



static int spitz_last_ac_status;



static void spitz_charger_init(void)
@@ -190,6 +197,7 @@ struct sharpsl_charger_machinfo spitz_pm_machinfo = { 
	.gpio_batlock     = SPITZ_GPIO_BAT_COVER,

	.gpio_acin        = SPITZ_GPIO_AC_IN,

	.gpio_batfull     = SPITZ_GPIO_CHRG_FULL,

	.batfull_irq	  = 1,

	.gpio_fatal       = SPITZ_GPIO_FATAL_BAT,

	.discharge        = spitz_discharge,

	.discharge1       = spitz_discharge1,
@@ -200,6 +208,13 @@ struct sharpsl_charger_machinfo spitz_pm_machinfo = { 
	.read_devdata     = spitzpm_read_devdata,

	.charger_wakeup   = spitz_charger_wakeup,

	.should_wakeup    = spitz_should_wakeup,

        .backlight_limit  = corgibl_limit_intensity,

	.charge_on_volt	  = SHARPSL_CHARGE_ON_VOLT,

	.charge_on_temp	  = SHARPSL_CHARGE_ON_TEMP,

	.charge_acin_high = SHARPSL_CHARGE_ON_ACIN_HIGH,

	.charge_acin_low  = SHARPSL_CHARGE_ON_ACIN_LOW,

	.fatal_acin_volt  = SHARPSL_FATAL_ACIN_VOLT,

	.fatal_noacin_volt= SHARPSL_FATAL_NOACIN_VOLT,

	.bat_levels       = 40,

	.bat_levels_noac  = spitz_battery_levels_noac,

	.bat_levels_acin  = spitz_battery_levels_acin,

include/asm-arm/hardware/sharpsl_pm.h

+11 −0
Original line number Diff line number Diff line
@@ -16,6 +16,7 @@ struct sharpsl_charger_machinfo { 
	void (*exit)(void);

	int gpio_acin;

	int gpio_batfull;

	int batfull_irq;

	int gpio_batlock;

	int gpio_fatal;

	void (*discharge)(int);
@@ -34,9 +35,19 @@ struct sharpsl_charger_machinfo { 
#define SHARPSL_STATUS_FATAL    7

	unsigned long (*charger_wakeup)(void);

	int (*should_wakeup)(unsigned int resume_on_alarm);

	void (*backlight_limit)(int);

	int (*backlight_get_status) (void);

	int charge_on_volt;

	int charge_on_temp;

	int charge_acin_high;

	int charge_acin_low;

	int fatal_acin_volt;

	int fatal_noacin_volt;

	int bat_levels;

	struct battery_thresh *bat_levels_noac;

	struct battery_thresh *bat_levels_acin;

	struct battery_thresh *bat_levels_noac_bl;

	struct battery_thresh *bat_levels_acin_bl;

	int status_high_acin;

	int status_low_acin;

	int status_high_noac;

CRA Git | Maintained and supported by SUSTech CRA and CCSE