Merge tag 'v3.17-rc4' into next

  <http://www.kroah.com/log/linux/maintainer-03.html>

  <http://www.kroah.com/log/linux/maintainer-04.html>

  <http://www.kroah.com/log/linux/maintainer-05.html>

  <http://www.kroah.com/log/linux/maintainer-06.html>

NO!!!! No more huge patch bombs to linux-kernel@vger.kernel.org people!

  <https://lkml.org/lkml/2005/7/11/336>

    keycode generated by each GPIO. Linux keycodes are defined in

    <dt-bindings/input/input.h>.

- linux,gpio-keymap: When enabled, the SPT_GPIOPWN_T19 object sends messages

    on GPIO bit changes. An array of up to 8 entries can be provided

    indicating the Linux keycode mapped to each bit of the status byte,

    starting at the LSB. Linux keycodes are defined in

    <dt-bindings/input/input.h>.

    Note: the numbering of the GPIOs and the bit they start at varies between

    maXTouch devices. You must either refer to the documentation, or

    experiment to determine which bit corresponds to which input. Use

    KEY_RESERVED for unused padding values.

Example:

	touch@4b {

1) Interrupt client nodes

-------------------------

Nodes that describe devices which generate interrupts must contain an either an

"interrupts" property or an "interrupts-extended" property. These properties

contain a list of interrupt specifiers, one per output interrupt. The format of

the interrupt specifier is determined by the interrupt controller to which the

interrupts are routed; see section 2 below for details.

Nodes that describe devices which generate interrupts must contain an

"interrupts" property, an "interrupts-extended" property, or both. If both are

present, the latter should take precedence; the former may be provided simply

for compatibility with software that does not recognize the latter. These

properties contain a list of interrupt specifiers, one per output interrupt. The

format of the interrupt specifier is determined by the interrupt controller to

which the interrupts are routed; see section 2 below for details.

  Example:

	interrupt-parent = <&intc1>;

* Toshiba TC3589x multi-purpose expander

The Toshiba TC3589x series are I2C-based MFD devices which may expose the

following built-in devices: gpio, keypad, rotator (vibrator), PWM (for

e.g. LEDs or vibrators) The included models are:

- TC35890

- TC35892

- TC35893

- TC35894

- TC35895

- TC35896

Required properties:

 - compatible : must be "toshiba,tc35890", "toshiba,tc35892", "toshiba,tc35893",

   "toshiba,tc35894", "toshiba,tc35895" or "toshiba,tc35896"

 - reg : I2C address of the device

 - interrupt-parent : specifies which IRQ controller we're connected to

 - interrupts : the interrupt on the parent the controller is connected to

 - interrupt-controller : marks the device node as an interrupt controller

 - #interrupt-cells : should be <1>, the first cell is the IRQ offset on this

   TC3589x interrupt controller.

Optional nodes:

- GPIO

  This GPIO module inside the TC3589x has 24 (TC35890, TC35892) or 20

  (other models) GPIO lines.

 - compatible : must be "toshiba,tc3589x-gpio"

 - interrupts : interrupt on the parent, which must be the tc3589x MFD device

 - interrupt-controller : marks the device node as an interrupt controller

 - #interrupt-cells : should be <2>, the first cell is the IRQ offset on this

   TC3589x GPIO interrupt controller, the second cell is the interrupt flags

   in accordance with <dt-bindings/interrupt-controller/irq.h>. The following

   flags are valid:

   - IRQ_TYPE_LEVEL_LOW

   - IRQ_TYPE_LEVEL_HIGH

   - IRQ_TYPE_EDGE_RISING

   - IRQ_TYPE_EDGE_FALLING

   - IRQ_TYPE_EDGE_BOTH

 - gpio-controller : marks the device node as a GPIO controller

 - #gpio-cells : should be <2>, the first cell is the GPIO offset on this

   GPIO controller, the second cell is the flags.

- Keypad

  This keypad is the same on all variants, supporting up to 96 different

  keys. The linux-specific properties are modeled on those already existing

  in other input drivers.

 - compatible : must be "toshiba,tc3589x-keypad"

 - debounce-delay-ms : debounce interval in milliseconds

 - keypad,num-rows : number of rows in the matrix, see

   bindings/input/matrix-keymap.txt

 - keypad,num-columns : number of columns in the matrix, see

   bindings/input/matrix-keymap.txt

 - linux,keymap: the definition can be found in

   bindings/input/matrix-keymap.txt

 - linux,no-autorepeat: do no enable autorepeat feature.

 - linux,wakeup: use any event on keypad as wakeup event.

Example:

tc35893@44 {

	compatible = "toshiba,tc35893";

	reg = <0x44>;

	interrupt-parent = <&gpio6>;

	interrupts = <26 IRQ_TYPE_EDGE_RISING>;

	interrupt-controller;

	#interrupt-cells = <1>;

	tc3589x_gpio {

		compatible = "toshiba,tc3589x-gpio";

		interrupts = <0>;

		interrupt-controller;

		#interrupt-cells = <2>;

		gpio-controller;

		#gpio-cells = <2>;

	};

	tc3589x_keypad {

		compatible = "toshiba,tc3589x-keypad";

		interrupts = <6>;

		debounce-delay-ms = <4>;

		keypad,num-columns = <8>;

		keypad,num-rows = <8>;

		linux,no-autorepeat;

		linux,wakeup;

		linux,keymap = <0x0301006b

				0x04010066

				0x06040072

				0x040200d7

				0x0303006a

				0x0205000e

				0x0607008b

				0x0500001c

				0x0403000b

				0x03040034

				0x05020067

				0x0305006c

				0x040500e7

				0x0005009e

				0x06020073

				0x01030039

				0x07060069

				0x050500d9>;

	};

};

				width of 8 is assumed.

 - ti,nand-ecc-opt:		A string setting the ECC layout to use. One of:

		"sw"		<deprecated> use "ham1" instead

		"sw"		1-bit Hamming ecc code via software

		"hw"		<deprecated> use "ham1" instead

		"hw-romcode"	<deprecated> use "ham1" instead

		"ham1"		1-bit Hamming ecc code