Commit f741df1f authored by Linus Torvalds's avatar Linus Torvalds
Browse files

Merge tag 'for-linus-20130509' of git://git.infradead.org/~dwmw2/random-2.6 

Pull misc fixes from David Woodhouse:
 "This is some miscellaneous cleanups that don't really belong anywhere
  else (or were ignored), that have been sitting in linux-next for some
  time.  Two of them are fixes resulting from my audit of krealloc()
  usage that don't seem to have elicited any response when I posted
  them, and the other three are patches from Artem removing dead code."

* tag 'for-linus-20130509' of git://git.infradead.org/~dwmw2/random-2.6:
  pcmcia: remove RPX board stuff
  m68k: remove rpxlite stuff
  pcmcia: remove Motorola MBX860 support
  params: Fix potential memory leak in add_sysfs_param()
  dell-laptop: Fix krealloc() misuse in parse_da_table()
parents c67723eb 5950f080

arch/m68k/include/asm/commproc.h

+0 −17
Original line number Diff line number Diff line
@@ -480,23 +480,6 @@ typedef struct scc_enet { 
#define SICR_ENET_CLKRT	((uint)0x0000003d)

#endif



#ifdef CONFIG_RPXLITE

/* This ENET stuff is for the MPC850 with ethernet on SCC2.  Some of

 * this may be unique to the RPX-Lite configuration.

 * Note TENA is on Port B.

 */

#define PA_ENET_RXD	((ushort)0x0004)

#define PA_ENET_TXD	((ushort)0x0008)

#define PA_ENET_TCLK	((ushort)0x0200)

#define PA_ENET_RCLK	((ushort)0x0800)

#define PB_ENET_TENA	((uint)0x00002000)

#define PC_ENET_CLSN	((ushort)0x0040)

#define PC_ENET_RENA	((ushort)0x0080)



#define SICR_ENET_MASK	((uint)0x0000ff00)

#define SICR_ENET_CLKRT	((uint)0x00003d00)

#endif



#ifdef CONFIG_BSEIP

/* This ENET stuff is for the MPC823 with ethernet on SCC2.

 * This is unique to the BSE ip-Engine board.

drivers/pcmcia/m8xx_pcmcia.c

+0 −140
Original line number Diff line number Diff line
@@ -68,12 +68,6 @@ MODULE_LICENSE("Dual MPL/GPL"); 


#if !defined(CONFIG_PCMCIA_SLOT_A) && !defined(CONFIG_PCMCIA_SLOT_B)



/* The RPX series use SLOT_B */

#if defined(CONFIG_RPXCLASSIC) || defined(CONFIG_RPXLITE)

#define CONFIG_PCMCIA_SLOT_B

#define CONFIG_BD_IS_MHZ

#endif



/* The ADS board use SLOT_A */

#ifdef CONFIG_ADS

#define CONFIG_PCMCIA_SLOT_A
@@ -253,81 +247,6 @@ static irqreturn_t m8xx_interrupt(int irq, void *dev); 


#define PCMCIA_BMT_LIMIT (15*4)	/* Bus Monitor Timeout value */



/* ------------------------------------------------------------------------- */

/* board specific stuff:                                                     */

/* voltage_set(), hardware_enable() and hardware_disable()                   */

/* ------------------------------------------------------------------------- */

/* RPX Boards from Embedded Planet                                           */



#if defined(CONFIG_RPXCLASSIC) || defined(CONFIG_RPXLITE)



/* The RPX boards seems to have it's bus monitor timeout set to 6*8 clocks.

 * SYPCR is write once only, therefore must the slowest memory be faster

 * than the bus monitor or we will get a machine check due to the bus timeout.

 */



#define PCMCIA_BOARD_MSG "RPX CLASSIC or RPX LITE"



#undef PCMCIA_BMT_LIMIT

#define PCMCIA_BMT_LIMIT (6*8)



static int voltage_set(int slot, int vcc, int vpp)

{

	u32 reg = 0;



	switch (vcc) {

	case 0:

		break;

	case 33:

		reg |= BCSR1_PCVCTL4;

		break;

	case 50:

		reg |= BCSR1_PCVCTL5;

		break;

	default:

		return 1;

	}



	switch (vpp) {

	case 0:

		break;

	case 33:

	case 50:

		if (vcc == vpp)

			reg |= BCSR1_PCVCTL6;

		else

			return 1;

		break;

	case 120:

		reg |= BCSR1_PCVCTL7;

	default:

		return 1;

	}



	if (!((vcc == 50) || (vcc == 0)))

		return 1;



	/* first, turn off all power */



	out_be32(((u32 *) RPX_CSR_ADDR),

		 in_be32(((u32 *) RPX_CSR_ADDR)) & ~(BCSR1_PCVCTL4 |

						     BCSR1_PCVCTL5 |

						     BCSR1_PCVCTL6 |

						     BCSR1_PCVCTL7));



	/* enable new powersettings */



	out_be32(((u32 *) RPX_CSR_ADDR), in_be32(((u32 *) RPX_CSR_ADDR)) | reg);



	return 0;

}



#define socket_get(_slot_) PCMCIA_SOCKET_KEY_5V

#define hardware_enable(_slot_)	/* No hardware to enable */

#define hardware_disable(_slot_)	/* No hardware to disable */



#endif				/* CONFIG_RPXCLASSIC */



/* FADS Boards from Motorola                                               */



#if defined(CONFIG_FADS)
@@ -419,65 +338,6 @@ static inline int voltage_set(int slot, int vcc, int vpp) 


#endif



/* ------------------------------------------------------------------------- */

/* Motorola MBX860                                                           */



#if defined(CONFIG_MBX)



#define PCMCIA_BOARD_MSG "MBX"



static int voltage_set(int slot, int vcc, int vpp)

{

	u8 reg = 0;



	switch (vcc) {

	case 0:

		break;

	case 33:

		reg |= CSR2_VCC_33;

		break;

	case 50:

		reg |= CSR2_VCC_50;

		break;

	default:

		return 1;

	}



	switch (vpp) {

	case 0:

		break;

	case 33:

	case 50:

		if (vcc == vpp)

			reg |= CSR2_VPP_VCC;

		else

			return 1;

		break;

	case 120:

		if ((vcc == 33) || (vcc == 50))

			reg |= CSR2_VPP_12;

		else

			return 1;

	default:

		return 1;

	}



	/* first, turn off all power */

	out_8((u8 *) MBX_CSR2_ADDR,

	      in_8((u8 *) MBX_CSR2_ADDR) & ~(CSR2_VCC_MASK | CSR2_VPP_MASK));



	/* enable new powersettings */

	out_8((u8 *) MBX_CSR2_ADDR, in_8((u8 *) MBX_CSR2_ADDR) | reg);



	return 0;

}



#define socket_get(_slot_) PCMCIA_SOCKET_KEY_5V

#define hardware_enable(_slot_)	/* No hardware to enable */

#define hardware_disable(_slot_)	/* No hardware to disable */



#endif				/* CONFIG_MBX */



#if defined(CONFIG_PRxK)

#include <asm/cpld.h>

extern volatile fpga_pc_regs *fpga_pc;

drivers/platform/x86/dell-laptop.c

+6 −4
Original line number Diff line number Diff line
@@ -284,6 +284,7 @@ static void __init parse_da_table(const struct dmi_header *dm) 
{

	/* Final token is a terminator, so we don't want to copy it */

	int tokens = (dm->length-11)/sizeof(struct calling_interface_token)-1;

	struct calling_interface_token *new_da_tokens;

	struct calling_interface_structure *table =

		container_of(dm, struct calling_interface_structure, header);
@@ -296,12 +297,13 @@ static void __init parse_da_table(const struct dmi_header *dm) 
	da_command_address = table->cmdIOAddress;

	da_command_code = table->cmdIOCode;



	da_tokens = krealloc(da_tokens, (da_num_tokens + tokens) *

	new_da_tokens = krealloc(da_tokens, (da_num_tokens + tokens) *

				 sizeof(struct calling_interface_token),

				 GFP_KERNEL);



	if (!da_tokens)

	if (!new_da_tokens)

		return;

	da_tokens = new_da_tokens;



	memcpy(da_tokens+da_num_tokens, table->tokens,

	       sizeof(struct calling_interface_token) * tokens);

kernel/params.c

+4 −1
Original line number Diff line number Diff line
@@ -613,10 +613,13 @@ static __modinit int add_sysfs_param(struct module_kobject *mk, 
		       sizeof(*mk->mp) + sizeof(mk->mp->attrs[0]) * (num+1),

		       GFP_KERNEL);

	if (!new) {

		kfree(mk->mp);

		kfree(attrs);

		err = -ENOMEM;

		goto fail;

	}

	/* Despite looking like the typical realloc() bug, this is safe.

	 * We *want* the old 'attrs' to be freed either way, and we'll store

	 * the new one in the success case. */

	attrs = krealloc(attrs, sizeof(new->grp.attrs[0])*(num+2), GFP_KERNEL);

	if (!attrs) {

		err = -ENOMEM;

CRA Git | Maintained and supported by SUSTech CRA and CCSE