Commit f7225a83 authored by Jon Mason's avatar Jon Mason Committed by Stephen Boyd
Browse files

clk: ns2: add clock support for Broadcom Northstar 2 SoC 



The Broadcom Northstar 2 SoC is architected under the iProc
architecture. It has the following PLLs: GENPLL SCR, GENPLL SW,
LCPLL DDR, LCPLL Ports, all derived from an onboard crystal.

Signed-off-by: default avatarJon Mason <jonmason@broadcom.com>
Signed-off-by: default avatarStephen Boyd <sboyd@codeaurora.org>
parent 40c8bec3

drivers/clk/Makefile

+1 −1
Original line number Diff line number Diff line
@@ -47,7 +47,7 @@ obj-$(CONFIG_COMMON_CLK_WM831X) += clk-wm831x.o 
obj-$(CONFIG_COMMON_CLK_XGENE)		+= clk-xgene.o

obj-$(CONFIG_COMMON_CLK_PWM)		+= clk-pwm.o

obj-$(CONFIG_COMMON_CLK_AT91)		+= at91/

obj-$(CONFIG_ARCH_BCM)			+= bcm/

obj-y					+= bcm/

obj-$(CONFIG_ARCH_BERLIN)		+= berlin/

obj-$(CONFIG_ARCH_HISI)			+= hisilicon/

obj-$(CONFIG_ARCH_MXC)			+= imx/

drivers/clk/bcm/Makefile

+1 −0
Original line number Diff line number Diff line
@@ -3,6 +3,7 @@ obj-$(CONFIG_CLK_BCM_KONA) += clk-kona-setup.o 
obj-$(CONFIG_CLK_BCM_KONA)	+= clk-bcm281xx.o

obj-$(CONFIG_CLK_BCM_KONA)	+= clk-bcm21664.o

obj-$(CONFIG_COMMON_CLK_IPROC)	+= clk-iproc-armpll.o clk-iproc-pll.o clk-iproc-asiu.o

obj-$(CONFIG_COMMON_CLK_IPROC)	+= clk-ns2.o

obj-$(CONFIG_ARCH_BCM_CYGNUS)	+= clk-cygnus.o

obj-$(CONFIG_ARCH_BCM_NSP)	+= clk-nsp.o

obj-$(CONFIG_ARCH_BCM_5301X)	+= clk-nsp.o

drivers/clk/bcm/clk-ns2.c

0 → 100644
+288 −0
Original line number Diff line number Diff line 
/*

 * Copyright (C) 2015 Broadcom Corporation

 *

 * This program is free software; you can redistribute it and/or

 * modify it under the terms of the GNU General Public License as

 * published by the Free Software Foundation version 2.

 *

 * This program is distributed "as is" WITHOUT ANY WARRANTY of any

 * kind, whether express or implied; without even the implied warranty

 * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 * GNU General Public License for more details.

 */



#include <linux/kernel.h>

#include <linux/err.h>

#include <linux/clk-provider.h>

#include <linux/io.h>

#include <linux/of.h>

#include <linux/of_address.h>



#include <dt-bindings/clock/bcm-ns2.h>

#include "clk-iproc.h"



#define REG_VAL(o, s, w) { .offset = o, .shift = s, .width = w, }



#define AON_VAL(o, pw, ps, is) { .offset = o, .pwr_width = pw, \

	.pwr_shift = ps, .iso_shift = is }



#define RESET_VAL(o, rs, prs) { .offset = o, .reset_shift = rs, \

	.p_reset_shift = prs }



#define DF_VAL(o, kis, kiw, kps, kpw, kas, kaw) { .offset = o, .ki_shift = kis,\

	.ki_width = kiw, .kp_shift = kps, .kp_width = kpw, .ka_shift = kas,    \

	.ka_width = kaw }



#define VCO_CTRL_VAL(uo, lo) { .u_offset = uo, .l_offset = lo }



#define ENABLE_VAL(o, es, hs, bs) { .offset = o, .enable_shift = es, \

	.hold_shift = hs, .bypass_shift = bs }



static const struct iproc_pll_ctrl genpll_scr = {

	.flags = IPROC_CLK_AON | IPROC_CLK_PLL_SPLIT_STAT_CTRL,

	.aon = AON_VAL(0x0, 1, 15, 12),

	.reset = RESET_VAL(0x4, 2, 1),

	.dig_filter = DF_VAL(0x0, 9, 3, 5, 4, 2, 3),

	.ndiv_int = REG_VAL(0x8, 4, 10),

	.pdiv = REG_VAL(0x8, 0, 4),

	.vco_ctrl = VCO_CTRL_VAL(0x10, 0xc),

	.status = REG_VAL(0x0, 27, 1),

};





static const struct iproc_clk_ctrl genpll_scr_clk[] = {

	/* bypass_shift, the last value passed into ENABLE_VAL(), is not defined

	 * in NS2.  However, it doesn't appear to be used anywhere, so setting

	 * it to 0.

	 */

	[BCM_NS2_GENPLL_SCR_SCR_CLK] = {

		.channel = BCM_NS2_GENPLL_SCR_SCR_CLK,

		.flags = IPROC_CLK_AON,

		.enable = ENABLE_VAL(0x0, 18, 12, 0),

		.mdiv = REG_VAL(0x18, 0, 8),

	},

	[BCM_NS2_GENPLL_SCR_FS_CLK] = {

		.channel = BCM_NS2_GENPLL_SCR_FS_CLK,

		.flags = IPROC_CLK_AON,

		.enable = ENABLE_VAL(0x0, 19, 13, 0),

		.mdiv = REG_VAL(0x18, 8, 8),

	},

	[BCM_NS2_GENPLL_SCR_AUDIO_CLK] = {

		.channel = BCM_NS2_GENPLL_SCR_AUDIO_CLK,

		.flags = IPROC_CLK_AON,

		.enable = ENABLE_VAL(0x0, 20, 14, 0),

		.mdiv = REG_VAL(0x14, 0, 8),

	},

	[BCM_NS2_GENPLL_SCR_CH3_UNUSED] = {

		.channel = BCM_NS2_GENPLL_SCR_CH3_UNUSED,

		.flags = IPROC_CLK_AON,

		.enable = ENABLE_VAL(0x0, 21, 15, 0),

		.mdiv = REG_VAL(0x14, 8, 8),

	},

	[BCM_NS2_GENPLL_SCR_CH4_UNUSED] = {

		.channel = BCM_NS2_GENPLL_SCR_CH4_UNUSED,

		.flags = IPROC_CLK_AON,

		.enable = ENABLE_VAL(0x0, 22, 16, 0),

		.mdiv = REG_VAL(0x14, 16, 8),

	},

	[BCM_NS2_GENPLL_SCR_CH5_UNUSED] = {

		.channel = BCM_NS2_GENPLL_SCR_CH5_UNUSED,

		.flags = IPROC_CLK_AON,

		.enable = ENABLE_VAL(0x0, 23, 17, 0),

		.mdiv = REG_VAL(0x14, 24, 8),

	},

};



static void __init ns2_genpll_scr_clk_init(struct device_node *node)

{

	iproc_pll_clk_setup(node, &genpll_scr, NULL, 0, genpll_scr_clk,

			    ARRAY_SIZE(genpll_scr_clk));

}

CLK_OF_DECLARE(ns2_genpll_src_clk, "brcm,ns2-genpll-scr",

	       ns2_genpll_scr_clk_init);



static const struct iproc_pll_ctrl genpll_sw = {

	.flags = IPROC_CLK_AON | IPROC_CLK_PLL_SPLIT_STAT_CTRL,

	.aon = AON_VAL(0x0, 2, 9, 8),

	.reset = RESET_VAL(0x4, 2, 1),

	.dig_filter = DF_VAL(0x0, 9, 3, 5, 4, 2, 3),

	.ndiv_int = REG_VAL(0x8, 4, 10),

	.pdiv = REG_VAL(0x8, 0, 4),

	.vco_ctrl = VCO_CTRL_VAL(0x10, 0xc),

	.status = REG_VAL(0x0, 13, 1),

};



static const struct iproc_clk_ctrl genpll_sw_clk[] = {

	/* bypass_shift, the last value passed into ENABLE_VAL(), is not defined

	 * in NS2.  However, it doesn't appear to be used anywhere, so setting

	 * it to 0.

	 */

	[BCM_NS2_GENPLL_SW_RPE_CLK] = {

		.channel = BCM_NS2_GENPLL_SW_RPE_CLK,

		.flags = IPROC_CLK_AON,

		.enable = ENABLE_VAL(0x0, 18, 12, 0),

		.mdiv = REG_VAL(0x18, 0, 8),

	},

	[BCM_NS2_GENPLL_SW_250_CLK] = {

		.channel = BCM_NS2_GENPLL_SW_250_CLK,

		.flags = IPROC_CLK_AON,

		.enable = ENABLE_VAL(0x0, 19, 13, 0),

		.mdiv = REG_VAL(0x18, 8, 8),

	},

	[BCM_NS2_GENPLL_SW_NIC_CLK] = {

		.channel = BCM_NS2_GENPLL_SW_NIC_CLK,

		.flags = IPROC_CLK_AON,

		.enable = ENABLE_VAL(0x0, 20, 14, 0),

		.mdiv = REG_VAL(0x14, 0, 8),

	},

	[BCM_NS2_GENPLL_SW_CHIMP_CLK] = {

		.channel = BCM_NS2_GENPLL_SW_CHIMP_CLK,

		.flags = IPROC_CLK_AON,

		.enable = ENABLE_VAL(0x0, 21, 15, 0),

		.mdiv = REG_VAL(0x14, 8, 8),

	},

	[BCM_NS2_GENPLL_SW_PORT_CLK] = {

		.channel = BCM_NS2_GENPLL_SW_PORT_CLK,

		.flags = IPROC_CLK_AON,

		.enable = ENABLE_VAL(0x0, 22, 16, 0),

		.mdiv = REG_VAL(0x14, 16, 8),

	},

	[BCM_NS2_GENPLL_SW_SDIO_CLK] = {

		.channel = BCM_NS2_GENPLL_SW_SDIO_CLK,

		.flags = IPROC_CLK_AON,

		.enable = ENABLE_VAL(0x0, 23, 17, 0),

		.mdiv = REG_VAL(0x14, 24, 8),

	},

};



static void __init ns2_genpll_sw_clk_init(struct device_node *node)

{

	iproc_pll_clk_setup(node, &genpll_sw, NULL, 0, genpll_sw_clk,

			    ARRAY_SIZE(genpll_sw_clk));

}

CLK_OF_DECLARE(ns2_genpll_sw_clk, "brcm,ns2-genpll-sw",

	       ns2_genpll_sw_clk_init);



static const struct iproc_pll_ctrl lcpll_ddr = {

	.flags = IPROC_CLK_AON | IPROC_CLK_PLL_SPLIT_STAT_CTRL,

	.aon = AON_VAL(0x0, 2, 1, 0),

	.reset = RESET_VAL(0x4, 2, 1),

	.dig_filter = DF_VAL(0x0, 9, 3, 5, 4, 1, 4),

	.ndiv_int = REG_VAL(0x8, 4, 10),

	.pdiv = REG_VAL(0x8, 0, 4),

	.vco_ctrl = VCO_CTRL_VAL(0x10, 0xc),

	.status = REG_VAL(0x0, 0, 1),

};



static const struct iproc_clk_ctrl lcpll_ddr_clk[] = {

	/* bypass_shift, the last value passed into ENABLE_VAL(), is not defined

	 * in NS2.  However, it doesn't appear to be used anywhere, so setting

	 * it to 0.

	 */

	[BCM_NS2_LCPLL_DDR_PCIE_SATA_USB_CLK] = {

		.channel = BCM_NS2_LCPLL_DDR_PCIE_SATA_USB_CLK,

		.flags = IPROC_CLK_AON,

		.enable = ENABLE_VAL(0x0, 18, 12, 0),

		.mdiv = REG_VAL(0x14, 0, 8),

	},

	[BCM_NS2_LCPLL_DDR_DDR_CLK] = {

		.channel = BCM_NS2_LCPLL_DDR_DDR_CLK,

		.flags = IPROC_CLK_AON,

		.enable = ENABLE_VAL(0x0, 19, 13, 0),

		.mdiv = REG_VAL(0x14, 8, 8),

	},

	[BCM_NS2_LCPLL_DDR_CH2_UNUSED] = {

		.channel = BCM_NS2_LCPLL_DDR_CH2_UNUSED,

		.flags = IPROC_CLK_AON,

		.enable = ENABLE_VAL(0x0, 20, 14, 0),

		.mdiv = REG_VAL(0x10, 0, 8),

	},

	[BCM_NS2_LCPLL_DDR_CH3_UNUSED] = {

		.channel = BCM_NS2_LCPLL_DDR_CH3_UNUSED,

		.flags = IPROC_CLK_AON,

		.enable = ENABLE_VAL(0x0, 21, 15, 0),

		.mdiv = REG_VAL(0x10, 8, 8),

	},

	[BCM_NS2_LCPLL_DDR_CH4_UNUSED] = {

		.channel = BCM_NS2_LCPLL_DDR_CH4_UNUSED,

		.flags = IPROC_CLK_AON,

		.enable = ENABLE_VAL(0x0, 22, 16, 0),

		.mdiv = REG_VAL(0x10, 16, 8),

	},

	[BCM_NS2_LCPLL_DDR_CH5_UNUSED] = {

		.channel = BCM_NS2_LCPLL_DDR_CH5_UNUSED,

		.flags = IPROC_CLK_AON,

		.enable = ENABLE_VAL(0x0, 23, 17, 0),

		.mdiv = REG_VAL(0x10, 24, 8),

	},

};



static void __init ns2_lcpll_ddr_clk_init(struct device_node *node)

{

	iproc_pll_clk_setup(node, &lcpll_ddr, NULL, 0, lcpll_ddr_clk,

			    ARRAY_SIZE(lcpll_ddr_clk));

}

CLK_OF_DECLARE(ns2_lcpll_ddr_clk, "brcm,ns2-lcpll-ddr",

	       ns2_lcpll_ddr_clk_init);



static const struct iproc_pll_ctrl lcpll_ports = {

	.flags = IPROC_CLK_AON | IPROC_CLK_PLL_SPLIT_STAT_CTRL,

	.aon = AON_VAL(0x0, 2, 5, 4),

	.reset = RESET_VAL(0x4, 2, 1),

	.dig_filter = DF_VAL(0x0, 9, 3, 5, 4, 1, 4),

	.ndiv_int = REG_VAL(0x8, 4, 10),

	.pdiv = REG_VAL(0x8, 0, 4),

	.vco_ctrl = VCO_CTRL_VAL(0x10, 0xc),

	.status = REG_VAL(0x0, 0, 1),

};



static const struct iproc_clk_ctrl lcpll_ports_clk[] = {

	/* bypass_shift, the last value passed into ENABLE_VAL(), is not defined

	 * in NS2.  However, it doesn't appear to be used anywhere, so setting

	 * it to 0.

	 */

	[BCM_NS2_LCPLL_PORTS_WAN_CLK] = {

		.channel = BCM_NS2_LCPLL_PORTS_WAN_CLK,

		.flags = IPROC_CLK_AON,

		.enable = ENABLE_VAL(0x0, 18, 12, 0),

		.mdiv = REG_VAL(0x14, 0, 8),

	},

	[BCM_NS2_LCPLL_PORTS_RGMII_CLK] = {

		.channel = BCM_NS2_LCPLL_PORTS_RGMII_CLK,

		.flags = IPROC_CLK_AON,

		.enable = ENABLE_VAL(0x0, 19, 13, 0),

		.mdiv = REG_VAL(0x14, 8, 8),

	},

	[BCM_NS2_LCPLL_PORTS_CH2_UNUSED] = {

		.channel = BCM_NS2_LCPLL_PORTS_CH2_UNUSED,

		.flags = IPROC_CLK_AON,

		.enable = ENABLE_VAL(0x0, 20, 14, 0),

		.mdiv = REG_VAL(0x10, 0, 8),

	},

	[BCM_NS2_LCPLL_PORTS_CH3_UNUSED] = {

		.channel = BCM_NS2_LCPLL_PORTS_CH3_UNUSED,

		.flags = IPROC_CLK_AON,

		.enable = ENABLE_VAL(0x0, 21, 15, 0),

		.mdiv = REG_VAL(0x10, 8, 8),

	},

	[BCM_NS2_LCPLL_PORTS_CH4_UNUSED] = {

		.channel = BCM_NS2_LCPLL_PORTS_CH4_UNUSED,

		.flags = IPROC_CLK_AON,

		.enable = ENABLE_VAL(0x0, 22, 16, 0),

		.mdiv = REG_VAL(0x10, 16, 8),

	},

	[BCM_NS2_LCPLL_PORTS_CH5_UNUSED] = {

		.channel = BCM_NS2_LCPLL_PORTS_CH5_UNUSED,

		.flags = IPROC_CLK_AON,

		.enable = ENABLE_VAL(0x0, 23, 17, 0),

		.mdiv = REG_VAL(0x10, 24, 8),

	},

};



static void __init ns2_lcpll_ports_clk_init(struct device_node *node)

{

	iproc_pll_clk_setup(node, &lcpll_ports, NULL, 0, lcpll_ports_clk,

			    ARRAY_SIZE(lcpll_ports_clk));

}

CLK_OF_DECLARE(ns2_lcpll_ports_clk, "brcm,ns2-lcpll-ports",

	       ns2_lcpll_ports_clk_init);

include/dt-bindings/clock/bcm-ns2.h

0 → 100644
+72 −0
Original line number Diff line number Diff line 
/*

 *  BSD LICENSE

 *

 *  Copyright(c) 2015 Broadcom Corporation.  All rights reserved.

 *

 *  Redistribution and use in source and binary forms, with or without

 *  modification, are permitted provided that the following conditions

 *  are met:

 *

 *    * Redistributions of source code must retain the above copyright

 *      notice, this list of conditions and the following disclaimer.

 *    * Redistributions in binary form must reproduce the above copyright

 *      notice, this list of conditions and the following disclaimer in

 *      the documentation and/or other materials provided with the

 *      distribution.

 *    * Neither the name of Broadcom Corporation nor the names of its

 *      contributors may be used to endorse or promote products derived

 *      from this software without specific prior written permission.

 *

 *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS

 *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT

 *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR

 *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT

 *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,

 *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT

 *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,

 *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY

 *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT

 *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE

 *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

 */



#ifndef _CLOCK_BCM_NS2_H

#define _CLOCK_BCM_NS2_H



/* GENPLL SCR clock channel ID */

#define BCM_NS2_GENPLL_SCR		0

#define BCM_NS2_GENPLL_SCR_SCR_CLK	1

#define BCM_NS2_GENPLL_SCR_FS_CLK	2

#define BCM_NS2_GENPLL_SCR_AUDIO_CLK	3

#define BCM_NS2_GENPLL_SCR_CH3_UNUSED	4

#define BCM_NS2_GENPLL_SCR_CH4_UNUSED	5

#define BCM_NS2_GENPLL_SCR_CH5_UNUSED	6



/* GENPLL SW clock channel ID */

#define BCM_NS2_GENPLL_SW		0

#define BCM_NS2_GENPLL_SW_RPE_CLK	1

#define BCM_NS2_GENPLL_SW_250_CLK	2

#define BCM_NS2_GENPLL_SW_NIC_CLK	3

#define BCM_NS2_GENPLL_SW_CHIMP_CLK	4

#define BCM_NS2_GENPLL_SW_PORT_CLK	5

#define BCM_NS2_GENPLL_SW_SDIO_CLK	6



/* LCPLL DDR clock channel ID */

#define BCM_NS2_LCPLL_DDR		0

#define BCM_NS2_LCPLL_DDR_PCIE_SATA_USB_CLK	1

#define BCM_NS2_LCPLL_DDR_DDR_CLK	2

#define BCM_NS2_LCPLL_DDR_CH2_UNUSED	3

#define BCM_NS2_LCPLL_DDR_CH3_UNUSED	4

#define BCM_NS2_LCPLL_DDR_CH4_UNUSED	5

#define BCM_NS2_LCPLL_DDR_CH5_UNUSED	6



/* LCPLL PORTS clock channel ID */

#define BCM_NS2_LCPLL_PORTS		0

#define BCM_NS2_LCPLL_PORTS_WAN_CLK	1

#define BCM_NS2_LCPLL_PORTS_RGMII_CLK	2

#define BCM_NS2_LCPLL_PORTS_CH2_UNUSED	3

#define BCM_NS2_LCPLL_PORTS_CH3_UNUSED	4

#define BCM_NS2_LCPLL_PORTS_CH4_UNUSED	5

#define BCM_NS2_LCPLL_PORTS_CH5_UNUSED	6



#endif /* _CLOCK_BCM_NS2_H */

CRA Git | Maintained and supported by SUSTech CRA and CCSE