Commit f6e734a8 authored by Rafał Miłecki's avatar Rafał Miłecki Committed by Ralf Baechle
Browse files

MIPS: BCM47xx: Move NVRAM driver to the drivers/firmware/ 



After Broadcom switched from MIPS to ARM for their home routers we need
to have NVRAM driver in some common place (not arch/mips/). As explained
in Kconfig, this driver is responsible for parsing SoC configuration
data that is passed to the kernel in flash from the bootloader firmware
called "CFE".

We were thinking about putting it in bus directory, however there are
two possible buses for MIPS: drivers/ssb/ and drivers/bcma/. So this
won't fit there and this is why I would like to move this driver to the
drivers/firmware/.

Signed-off-by: default avatarRafał Miłecki <zajec5@gmail.com>
Reviewed-by: default avatarPaul Walmsley <paul@pwsan.com>
Cc: linux-mips@linux-mips.org
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Cc: Seiji Aguchi <seiji.aguchi@hds.com>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Mike Waychison <mikew@google.com>
Cc: Roy Franz <roy.franz@linaro.org>
Cc: Matt Fleming <matt.fleming@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Patchwork: https://patchwork.linux-mips.org/patch/10544/


Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
parent 1e51714c

MAINTAINERS

+6 −0
Original line number Diff line number Diff line
@@ -2265,6 +2265,12 @@ S: Supported 
F:	drivers/gpio/gpio-bcm-kona.c

F:	Documentation/devicetree/bindings/gpio/gpio-bcm-kona.txt



BROADCOM NVRAM DRIVER

M:	Rafał Miłecki <zajec5@gmail.com>

L:	linux-mips@linux-mips.org

S:	Maintained

F:	drivers/firmware/broadcom/*



BROADCOM SPECIFIC AMBA DRIVER (BCMA)

M:	Rafał Miłecki <zajec5@gmail.com>

L:	linux-wireless@vger.kernel.org

arch/mips/Kconfig

+1 −0
Original line number Diff line number Diff line
@@ -190,6 +190,7 @@ config BCM47XX 
	select USE_GENERIC_EARLY_PRINTK_8250

	select GPIOLIB

	select LEDS_GPIO_REGISTER

	select BCM47XX_NVRAM

	help

	 Support for BCM47XX based boards

arch/mips/bcm47xx/Makefile

+1 −1
Original line number Diff line number Diff line
@@ -3,5 +3,5 @@ 
# under Linux.

#



obj-y				+= irq.o nvram.o prom.o serial.o setup.o time.o sprom.o

obj-y				+= irq.o prom.o serial.o setup.o time.o sprom.o

obj-y				+= board.o buttons.o leds.o workarounds.o

drivers/firmware/Kconfig

+1 −0
Original line number Diff line number Diff line
@@ -136,6 +136,7 @@ config QCOM_SCM 
	bool

	depends on ARM || ARM64



source "drivers/firmware/broadcom/Kconfig"

source "drivers/firmware/google/Kconfig"

source "drivers/firmware/efi/Kconfig"

drivers/firmware/Makefile

+1 −0
Original line number Diff line number Diff line
@@ -14,6 +14,7 @@ obj-$(CONFIG_FIRMWARE_MEMMAP) += memmap.o 
obj-$(CONFIG_QCOM_SCM)		+= qcom_scm.o

CFLAGS_qcom_scm.o :=$(call as-instr,.arch_extension sec,-DREQUIRES_SEC=1)



obj-y				+= broadcom/

obj-$(CONFIG_GOOGLE_FIRMWARE)	+= google/

obj-$(CONFIG_EFI)		+= efi/

obj-$(CONFIG_UEFI_CPER)		+= efi/

CRA Git | Maintained and supported by SUSTech CRA and CCSE