Input: add S3C24XX touchscreen driver

	  To compile this driver as a module, choose M here: the

	  module will be called fujitsu-ts.

config TOUCHSCREEN_S3C2410

	tristate "Samsung S3C2410 touchscreen input driver"

	depends on ARCH_S3C2410

	select S3C24XX_ADC

	help

	  Say Y here if you have the s3c2410 touchscreen.

	  If unsure, say N.

	  To compile this driver as a module, choose M here: the

	  module will be called s3c2410_ts.

config TOUCHSCREEN_GUNZE

	tristate "Gunze AHL-51S touchscreen"

	select SERIO

obj-$(CONFIG_TOUCHSCREEN_HP7XX)		+= jornada720_ts.o

obj-$(CONFIG_TOUCHSCREEN_HTCPEN)	+= htcpen.o

obj-$(CONFIG_TOUCHSCREEN_USB_COMPOSITE)	+= usbtouchscreen.o

obj-$(CONFIG_TOUCHSCREEN_PCAP)		+= pcap_ts.o

obj-$(CONFIG_TOUCHSCREEN_PENMOUNT)	+= penmount.o

obj-$(CONFIG_TOUCHSCREEN_S3C2410)	+= s3c2410_ts.o

obj-$(CONFIG_TOUCHSCREEN_TOUCHIT213)	+= touchit213.o

obj-$(CONFIG_TOUCHSCREEN_TOUCHRIGHT)	+= touchright.o

obj-$(CONFIG_TOUCHSCREEN_TOUCHWIN)	+= touchwin.o

obj-$(CONFIG_TOUCHSCREEN_WM97XX_MAINSTONE)	+= mainstone-wm97xx.o

obj-$(CONFIG_TOUCHSCREEN_WM97XX_ZYLONITE)	+= zylonite-wm97xx.o

obj-$(CONFIG_TOUCHSCREEN_W90X900)	+= w90p910_ts.o

obj-$(CONFIG_TOUCHSCREEN_PCAP)		+= pcap_ts.o

/*

 * Samsung S3C24XX touchscreen driver

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the term of the GNU General Public License as published by

 * the Free Software Foundation; either version 2 of the License, or

 * (at your option) any later version.

 *

 * This program is distributed in the hope that it will be useful,

 * but WITHOUT ANY WARRANTY; without even the implied warranty of

 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 * GNU General Public License for more details.

 *

 * You should have received a copy of the GNU General Public License

 * along with this program; if not, write to the Free Software

 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA

 *

 * Copyright 2004 Arnaud Patard <arnaud.patard@rtp-net.org>

 * Copyright 2008 Ben Dooks <ben-linux@fluff.org>

 * Copyright 2009 Simtec Electronics <linux@simtec.co.uk>

 *

 * Additional work by Herbert Pötzl <herbert@13thfloor.at> and

 * Harald Welte <laforge@openmoko.org>

 */

#include <linux/errno.h>

#include <linux/kernel.h>

#include <linux/module.h>

#include <linux/slab.h>

#include <linux/gpio.h>

#include <linux/input.h>

#include <linux/init.h>

#include <linux/delay.h>

#include <linux/interrupt.h>

#include <linux/platform_device.h>

#include <linux/clk.h>

#include <linux/io.h>

#include <plat/adc.h>

#include <plat/regs-adc.h>

#include <mach/regs-gpio.h>

#include <mach/ts.h>

#define TSC_SLEEP  (S3C2410_ADCTSC_PULL_UP_DISABLE | S3C2410_ADCTSC_XY_PST(0))

#define INT_DOWN	(0)

#define INT_UP		(1 << 8)

#define WAIT4INT	(S3C2410_ADCTSC_YM_SEN | \

			 S3C2410_ADCTSC_YP_SEN | \

			 S3C2410_ADCTSC_XP_SEN | \

			 S3C2410_ADCTSC_XY_PST(3))

#define AUTOPST		(S3C2410_ADCTSC_YM_SEN | \

			 S3C2410_ADCTSC_YP_SEN | \

			 S3C2410_ADCTSC_XP_SEN | \

			 S3C2410_ADCTSC_AUTO_PST | \

			 S3C2410_ADCTSC_XY_PST(0))

/* Per-touchscreen data. */

/**

 * struct s3c2410ts - driver touchscreen state.

 * @client: The ADC client we registered with the core driver.

 * @dev: The device we are bound to.

 * @input: The input device we registered with the input subsystem.

 * @clock: The clock for the adc.

 * @io: Pointer to the IO base.

 * @xp: The accumulated X position data.

 * @yp: The accumulated Y position data.

 * @irq_tc: The interrupt number for pen up/down interrupt

 * @count: The number of samples collected.

 * @shift: The log2 of the maximum count to read in one go.

 */

struct s3c2410ts {

	struct s3c_adc_client *client;

	struct device *dev;

	struct input_dev *input;

	struct clk *clock;

	void __iomem *io;

	unsigned long xp;

	unsigned long yp;

	int irq_tc;

	int count;

	int shift;

};

static struct s3c2410ts ts;

/**

 * s3c2410_ts_connect - configure gpio for s3c2410 systems

 *

 * Configure the GPIO for the S3C2410 system, where we have external FETs

 * connected to the device (later systems such as the S3C2440 integrate

 * these into the device).

*/

static inline void s3c2410_ts_connect(void)

{

	s3c2410_gpio_cfgpin(S3C2410_GPG(12), S3C2410_GPG12_XMON);

	s3c2410_gpio_cfgpin(S3C2410_GPG(13), S3C2410_GPG13_nXPON);

	s3c2410_gpio_cfgpin(S3C2410_GPG(14), S3C2410_GPG14_YMON);

	s3c2410_gpio_cfgpin(S3C2410_GPG(15), S3C2410_GPG15_nYPON);

}

/**

 * get_down - return the down state of the pen

 * @data0: The data read from ADCDAT0 register.

 * @data1: The data read from ADCDAT1 register.

 *

 * Return non-zero if both readings show that the pen is down.

 */

static inline bool get_down(unsigned long data0, unsigned long data1)

{

	/* returns true if both data values show stylus down */

	return (!(data0 & S3C2410_ADCDAT0_UPDOWN) &&

		!(data1 & S3C2410_ADCDAT0_UPDOWN));

}

static void touch_timer_fire(unsigned long data)

{

	unsigned long data0;

	unsigned long data1;

	bool down;

	data0 = readl(ts.io + S3C2410_ADCDAT0);

	data1 = readl(ts.io + S3C2410_ADCDAT1);

	down = get_down(data0, data1);

	if (ts.count == (1 << ts.shift)) {

		ts.xp >>= ts.shift;

		ts.yp >>= ts.shift;

		dev_dbg(ts.dev, "%s: X=%lu, Y=%lu, count=%d\n",

			__func__, ts.xp, ts.yp, ts.count);

		input_report_abs(ts.input, ABS_X, ts.xp);

		input_report_abs(ts.input, ABS_Y, ts.yp);

		input_report_key(ts.input, BTN_TOUCH, 1);

		input_sync(ts.input);

		ts.xp = 0;

		ts.yp = 0;

		ts.count = 0;

	}

	if (down) {

		s3c_adc_start(ts.client, 0, 1 << ts.shift);

	} else {

		ts.count = 0;

		input_report_key(ts.input, BTN_TOUCH, 0);

		input_sync(ts.input);

		writel(WAIT4INT | INT_DOWN, ts.io + S3C2410_ADCTSC);

	}

}

static DEFINE_TIMER(touch_timer, touch_timer_fire, 0, 0);

/**

 * stylus_irq - touchscreen stylus event interrupt

 * @irq: The interrupt number

 * @dev_id: The device ID.

 *

 * Called when the IRQ_TC is fired for a pen up or down event.

 */

static irqreturn_t stylus_irq(int irq, void *dev_id)

{

	unsigned long data0;

	unsigned long data1;

	bool down;

	data0 = readl(ts.io + S3C2410_ADCDAT0);

	data1 = readl(ts.io + S3C2410_ADCDAT1);

	down = get_down(data0, data1);

	/* TODO we should never get an interrupt with down set while

	 * the timer is running, but maybe we ought to verify that the

	 * timer isn't running anyways. */

	if (down)

		s3c_adc_start(ts.client, 0, 1 << ts.shift);

	else

		dev_info(ts.dev, "%s: count=%d\n", __func__, ts.count);

	return IRQ_HANDLED;

}

/**

 * s3c24xx_ts_conversion - ADC conversion callback

 * @client: The client that was registered with the ADC core.

 * @data0: The reading from ADCDAT0.

 * @data1: The reading from ADCDAT1.

 * @left: The number of samples left.

 *

 * Called when a conversion has finished.

 */

static void s3c24xx_ts_conversion(struct s3c_adc_client *client,

				  unsigned data0, unsigned data1,

				  unsigned *left)

{

	dev_dbg(ts.dev, "%s: %d,%d\n", __func__, data0, data1);

	ts.xp += data0;

	ts.yp += data1;

	ts.count++;

	/* From tests, it seems that it is unlikely to get a pen-up

	 * event during the conversion process which means we can

	 * ignore any pen-up events with less than the requisite

	 * count done.

	 *

	 * In several thousand conversions, no pen-ups where detected

	 * before count completed.

	 */

}

/**

 * s3c24xx_ts_select - ADC selection callback.

 * @client: The client that was registered with the ADC core.

 * @select: The reason for select.

 *

 * Called when the ADC core selects (or deslects) us as a client.

 */

static void s3c24xx_ts_select(struct s3c_adc_client *client, unsigned select)

{

	if (select) {

		writel(S3C2410_ADCTSC_PULL_UP_DISABLE | AUTOPST,

		       ts.io + S3C2410_ADCTSC);

	} else {

		mod_timer(&touch_timer, jiffies+1);

		writel(WAIT4INT | INT_UP, ts.io + S3C2410_ADCTSC);

	}

}

/**

 * s3c2410ts_probe - device core probe entry point

 * @pdev: The device we are being bound to.

 *

 * Initialise, find and allocate any resources we need to run and then

 * register with the ADC and input systems.

 */

static int __devinit s3c2410ts_probe(struct platform_device *pdev)

{

	struct s3c2410_ts_mach_info *info;

	struct device *dev = &pdev->dev;

	struct input_dev *input_dev;

	struct resource *res;

	int ret = -EINVAL;

	/* Initialise input stuff */

	memset(&ts, 0, sizeof(struct s3c2410ts));

	ts.dev = dev;

	info = pdev->dev.platform_data;

	if (!info) {

		dev_err(dev, "no platform data, cannot attach\n");

		return -EINVAL;

	}

	dev_dbg(dev, "initialising touchscreen\n");

	ts.clock = clk_get(dev, "adc");

	if (IS_ERR(ts.clock)) {

		dev_err(dev, "cannot get adc clock source\n");

		return -ENOENT;

	}

	clk_enable(ts.clock);

	dev_dbg(dev, "got and enabled clocks\n");

	ts.irq_tc = ret = platform_get_irq(pdev, 0);

	if (ret < 0) {

		dev_err(dev, "no resource for interrupt\n");

		goto err_clk;

	}

	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);

	if (!res) {

		dev_err(dev, "no resource for registers\n");

		ret = -ENOENT;

		goto err_clk;

	}

	ts.io = ioremap(res->start, resource_size(res));

	if (ts.io == NULL) {

		dev_err(dev, "cannot map registers\n");

		ret = -ENOMEM;

		goto err_clk;

	}

	/* Configure the touchscreen external FETs on the S3C2410 */

	if (!platform_get_device_id(pdev)->driver_data)

		s3c2410_ts_connect();

	ts.client = s3c_adc_register(pdev, s3c24xx_ts_select,

				     s3c24xx_ts_conversion, 1);

	if (IS_ERR(ts.client)) {

		dev_err(dev, "failed to register adc client\n");

		ret = PTR_ERR(ts.client);

		goto err_iomap;

	}

	/* Initialise registers */

	if ((info->delay & 0xffff) > 0)

		writel(info->delay & 0xffff, ts.io + S3C2410_ADCDLY);

	writel(WAIT4INT | INT_DOWN, ts.io + S3C2410_ADCTSC);

	input_dev = input_allocate_device();

	if (!input_dev) {

		dev_err(dev, "Unable to allocate the input device !!\n");

		ret = -ENOMEM;

		goto err_iomap;

	}

	ts.input = input_dev;

	ts.input->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);

	ts.input->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);

	input_set_abs_params(ts.input, ABS_X, 0, 0x3FF, 0, 0);

	input_set_abs_params(ts.input, ABS_Y, 0, 0x3FF, 0, 0);

	ts.input->name = "S3C24XX TouchScreen";

	ts.input->id.bustype = BUS_HOST;

	ts.input->id.vendor = 0xDEAD;

	ts.input->id.product = 0xBEEF;

	ts.input->id.version = 0x0102;

	ts.shift = info->oversampling_shift;

	ret = request_irq(ts.irq_tc, stylus_irq, IRQF_DISABLED,

			  "s3c2410_ts_pen", ts.input);

	if (ret) {

		dev_err(dev, "cannot get TC interrupt\n");

		goto err_inputdev;

	}

	dev_info(dev, "driver attached, registering input device\n");

	/* All went ok, so register to the input system */

	ret = input_register_device(ts.input);

	if (ret < 0) {

		dev_err(dev, "failed to register input device\n");

		ret = -EIO;

		goto err_tcirq;

	}

	return 0;

 err_tcirq:

	free_irq(ts.irq_tc, ts.input);

 err_inputdev:

	input_unregister_device(ts.input);

 err_iomap:

	iounmap(ts.io);

 err_clk:

	del_timer_sync(&touch_timer);

	clk_put(ts.clock);

	return ret;

}

/**

 * s3c2410ts_remove - device core removal entry point

 * @pdev: The device we are being removed from.

 *

 * Free up our state ready to be removed.

 */

static int __devexit s3c2410ts_remove(struct platform_device *pdev)

{

	free_irq(ts.irq_tc, ts.input);

	del_timer_sync(&touch_timer);

	clk_disable(ts.clock);

	clk_put(ts.clock);

	input_unregister_device(ts.input);

	iounmap(ts.io);

	return 0;

}

#ifdef CONFIG_PM

static int s3c2410ts_suspend(struct device *dev)

{

	writel(TSC_SLEEP, ts.io + S3C2410_ADCTSC);

	disable_irq(ts.irq_tc);

	clk_disable(ts.clock);

	return 0;

}

static int s3c2410ts_resume(struct device *dev)

{

	struct platform_device *pdev = to_platform_device(dev);

	struct s3c2410_ts_mach_info *info = pdev->dev.platform_data;

	clk_enable(ts.clock);

	/* Initialise registers */

	if ((info->delay & 0xffff) > 0)

		writel(info->delay & 0xffff, ts.io + S3C2410_ADCDLY);

	writel(WAIT4INT | INT_DOWN, ts.io + S3C2410_ADCTSC);

	return 0;

}

static struct dev_pm_ops s3c_ts_pmops = {

	.suspend	= s3c2410ts_suspend,

	.resume		= s3c2410ts_resume,

};

#endif

static struct platform_device_id s3cts_driver_ids[] = {

	{ "s3c2410-ts", 0 },

	{ "s3c2440-ts", 1 },

	{ }

};

MODULE_DEVICE_TABLE(platform, s3cts_driver_ids);

static struct platform_driver s3c_ts_driver = {

	.driver         = {

		.name   = "s3c24xx-ts",

		.owner  = THIS_MODULE,

#ifdef CONFIG_PM

		.pm	= &s3c_ts_pmops,

#endif

	},

	.id_table	= s3cts_driver_ids,

	.probe		= s3c2410ts_probe,

	.remove		= __devexit_p(s3c2410ts_remove),

};

static int __init s3c2410ts_init(void)

{

	return platform_driver_register(&s3c_ts_driver);

}

static void __exit s3c2410ts_exit(void)

{

	platform_driver_unregister(&s3c_ts_driver);

}

module_init(s3c2410ts_init);

module_exit(s3c2410ts_exit);

MODULE_AUTHOR("Arnaud Patard <arnaud.patard@rtp-net.org>, "

	      "Ben Dooks <ben@simtec.co.uk>, "

	      "Simtec Electronics <linux@simtec.co.uk>");

MODULE_DESCRIPTION("S3C24XX Touchscreen driver");

MODULE_LICENSE("GPL v2");