Commit f5f93117 authored by Mika Westerberg's avatar Mika Westerberg Committed by Grant Likely
Browse files

gpio/langwell: clear IRQ edge detect registers at init 



The boot firmware might leave the registers configured causing interrupts
to happen even when no handler for them is yet registered. Fix this by
clearing the IRQ edge detect registers at init.

Signed-off-by: default avatarMika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: default avatarGrant Likely <grant.likely@secretlab.ca>
parent b3e35af2

drivers/gpio/gpio-langwell.c

+21 −0
Original line number Diff line number Diff line
@@ -263,6 +263,24 @@ static void lnw_irq_handler(unsigned irq, struct irq_desc *desc) 
	chip->irq_eoi(data);

}



static void lnw_irq_init_hw(struct lnw_gpio *lnw)

{

	void __iomem *reg;

	unsigned base;



	for (base = 0; base < lnw->chip.ngpio; base += 32) {

		/* Clear the rising-edge detect register */

		reg = gpio_reg(&lnw->chip, base, GRER);

		writel(0, reg);

		/* Clear the falling-edge detect register */

		reg = gpio_reg(&lnw->chip, base, GFER);

		writel(0, reg);

		/* Clear the edge detect status register */

		reg = gpio_reg(&lnw->chip, base, GEDR);

		writel(~0, reg);

	}

}



#ifdef CONFIG_PM

static int lnw_gpio_runtime_resume(struct device *dev)

{
@@ -371,6 +389,9 @@ static int __devinit lnw_gpio_probe(struct pci_dev *pdev, 
		dev_err(&pdev->dev, "langwell gpiochip_add error %d\n", retval);

		goto err4;

	}



	lnw_irq_init_hw(lnw);



	irq_set_handler_data(pdev->irq, lnw);

	irq_set_chained_handler(pdev->irq, lnw_irq_handler);

	for (i = 0; i < lnw->chip.ngpio; i++) {

CRA Git | Maintained and supported by SUSTech CRA and CCSE