Commit f3b2c99e authored by Jeremy McNicoll's avatar Jeremy McNicoll Committed by Andy Gross
Browse files

arm64: dts: Enable onboard SDHCI on msm8992 



This enables SDHCI on the Nexus 5X as well creates common smd_rpm node
which can be shared between both 5X and 6P as per HW design.

Given the lack of documentation, only downstream code was used as a reference
and it eludes to the fact that 8994-rpm-regulator is common between both msm8992
& msm8994.   [ see msm.git branch: msm-angler-3.10-marshmallow-mr1, msm8992.dtsi]

At this early stage of development it makes sense for the 8994-rpm-regulator
to be common until data / documentation suggests otherwise.

Signed-off-by: default avatarJeremy McNicoll <jeremymc@redhat.com>
Acked-by: default avatarBjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: default avatarAndy Gross <andy.gross@linaro.org>
parent 60cc43fc

arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts

+2 −0
Original line number Diff line number Diff line
@@ -39,3 +39,5 @@ 
		};

	};

};



#include "msm8994-smd-rpm.dtsi"

arch/arm64/boot/dts/qcom/msm8992-pins.dtsi

+60 −0
Original line number Diff line number Diff line
@@ -35,4 +35,64 @@ 
			bias-pull-down;

		};

	};



	/* 0-3 for sdc1 4-6 for sdc2 */

	/* Order of pins */

	/* SDC1: CLK -> 0, CMD -> 1, DATA -> 2, RCLK -> 3 */

	/* SDC2: CLK -> 4, CMD -> 5, DATA -> 6 */

	sdc1_clk_on: clk-on {

		pinconf {

			pins = "sdc1_clk";

			bias-disable = <0>; /* No pull */

			drive-strength = <16>; /* 16mA */

		};

	};



	sdc1_clk_off: clk-off {

		pinconf {

			pins = "sdc1_clk";

			bias-disable = <0>; /* No pull */

			drive-strength = <2>; /* 2mA */

		};

	};



	sdc1_cmd_on: cmd-on {

		pinconf {

			pins = "sdc1_cmd";

			bias-pull-up;

			drive-strength = <8>;

		};

	};



	sdc1_cmd_off: cmd-off {

		pinconf {

			pins = "sdc1_cmd";

			bias-pull-up = <0x3>; /* same as 3.10 ?? */

			drive-strength = <2>; /* 2mA */

		};

	};



	sdc1_data_on: data-on {

		pinconf {

			pins = "sdc1_data";

			bias-pull-up;

			drive-strength = <8>; /* 8mA */

		};

	};



	sdc1_data_off: data-off {

		pinconf {

			pins = "sdc1_data";

			bias-pull-up;

			drive-strength = <2>;

		};

	};



	sdc1_rclk_on: rclk-on {

		bias-pull-down; /* pull down */

	};



	sdc1_rclk_off: rclk-off {

		bias-pull-down; /* pull down */

	};

};

arch/arm64/boot/dts/qcom/msm8992.dtsi

+86 −1
Original line number Diff line number Diff line
@@ -202,6 +202,31 @@ 
			reg = <0xfc400000 0x2000>;

		};



		sdhci1: mmc@f9824900 {

			compatible = "qcom,sdhci-msm-v4";

			reg = <0xf9824900 0x1a0>, <0xf9824000 0x800>;

			reg-names = "hc_mem", "core_mem";



			interrupts = <GIC_SPI 123 IRQ_TYPE_NONE>,

					<GIC_SPI 138 IRQ_TYPE_NONE>;

			interrupt-names = "hc_irq", "pwr_irq";



			clocks = <&clock_gcc GCC_SDCC1_APPS_CLK>,

				<&clock_gcc GCC_SDCC1_AHB_CLK>;

			clock-names = "core", "iface";



			pinctrl-names = "default", "sleep";

			pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on

					&sdc1_rclk_on>;

			pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off

					&sdc1_rclk_off>;



			regulator-always-on;

			bus-width = <8>;

			mmc-hs400-1_8v;

			status = "okay";

		};



		rpm_msg_ram: memory@fc428000 {

			compatible = "qcom,rpm-msg-ram";

			reg = <0xfc428000 0x4000>;
@@ -231,7 +256,67 @@ 
		};

	};



	smd_rpm: smd {

		compatible = "qcom,smd";

		rpm {

			interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;

			qcom,ipc = <&apcs 8 0>;

			qcom,smd-edge = <15>;

			qcom,local-pid = <0>;

			qcom,remote-pid = <6>;



			rpm-requests {

				compatible = "qcom,rpm-msm8994";

				qcom,smd-channels = "rpm_requests";



				pm8994-regulators {

					compatible = "qcom,rpm-pm8994-regulators";



					pm8994_s1: s1 {};

					pm8994_s2: s2 {};

					pm8994_s3: s3 {};

					pm8994_s4: s4 {};

					pm8994_s5: s5 {};

					pm8994_s6: s6 {};

					pm8994_s7: s7 {};



					pm8994_l1: l1 {};

					pm8994_l2: l2 {};

					pm8994_l3: l3 {};

					pm8994_l4: l4 {};

					pm8994_l6: l6 {};

					pm8994_l8: l8 {};

					pm8994_l9: l9 {};

					pm8994_l10: l10 {};

					pm8994_l11: l11 {};

					pm8994_l12: l12 {};

					pm8994_l13: l13 {};

					pm8994_l14: l14 {};

					pm8994_l15: l15 {};

					pm8994_l16: l16 {};

					pm8994_l17: l17 {};

					pm8994_l18: l18 {};

					pm8994_l19: l19 {};

					pm8994_l20: l20 {};

					pm8994_l21: l21 {};

					pm8994_l22: l22 {};

					pm8994_l23: l23 {};

					pm8994_l24: l24 {};

					pm8994_l25: l25 {};

					pm8994_l26: l26 {};

					pm8994_l27: l27 {};

					pm8994_l28: l28 {};

					pm8994_l29: l29 {};

					pm8994_l30: l30 {};

					pm8994_l31: l31 {};

					pm8994_l32: l32 {};



					pm8994_lvs1: lvs1 {};

					pm8994_lvs2: lvs2 {};

				};

			};

		};

	};

};





#include "msm8992-pins.dtsi"

arch/arm64/boot/dts/qcom/msm8994-smd-rpm.dtsi

0 → 100644
+276 −0
Original line number Diff line number Diff line 
/* Copyright (c) 2015, LGE Inc. All rights reserved.

 * Copyright (c) 2016, The Linux Foundation. All rights reserved.

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License version 2 and

 * only version 2 as published by the Free Software Foundation.

 *

 * This program is distributed in the hope that it will be useful,

 * but WITHOUT ANY WARRANTY; without even the implied warranty of

 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 * GNU General Public License for more details.

 */



&smd_rpm {

	rpm {

		rpm_requests {

			pm8994-regulators {



				vdd_l1-supply = <&pm8994_s1>;

				vdd_l2_26_28-supply = <&pm8994_s3>;

				vdd_l3_11-supply = <&pm8994_s3>;

				vdd_l4_27_31-supply = <&pm8994_s3>;

				vdd_l5_7-supply = <&pm8994_s3>;

				vdd_l6_12_32-supply = <&pm8994_s5>;

				vdd_l8_16_30-supply = <&vreg_vph_pwr>;

				vdd_l9_10_18_22-supply = <&vreg_vph_pwr>;

				vdd_l13_19_23_24-supply = <&vreg_vph_pwr>;

				vdd_l14_15-supply = <&pm8994_s5>;

				vdd_l17_29-supply = <&vreg_vph_pwr>;

				vdd_l20_21-supply = <&vreg_vph_pwr>;

				vdd_l25-supply = <&pm8994_s5>;

				vdd_lvs1_2 = <&pm8994_s4>;



				s1 {

					regulator-min-microvolt = <800000>;

					regulator-max-microvolt = <800000>;

				};



				s2 {

					/* TODO */

				};



				s3 {

					regulator-min-microvolt = <1300000>;

					regulator-max-microvolt = <1300000>;

				};



				s4 {

					regulator-min-microvolt = <1800000>;

					regulator-max-microvolt = <1800000>;

					regulator-allow-set-load;

					regulator-system-load = <325000>;

				};



				s5 {

					regulator-min-microvolt = <2150000>;

					regulator-max-microvolt = <2150000>;

				};



				s7 {

					regulator-min-microvolt = <1000000>;

					regulator-max-microvolt = <1000000>;

				};



				l1 {

					regulator-min-microvolt = <1000000>;

					regulator-max-microvolt = <1000000>;

				};



				l2 {

					regulator-min-microvolt = <1250000>;

					regulator-max-microvolt = <1250000>;

				};



				l3 {

					regulator-min-microvolt = <1200000>;

					regulator-max-microvolt = <1200000>;

				};



				l4 {

					regulator-min-microvolt = <1225000>;

					regulator-max-microvolt = <1225000>;

				};



				l5 {

					/* TODO */

				};



				l6 {

					regulator-min-microvolt = <1800000>;

					regulator-max-microvolt = <1800000>;

				};



				l7 {

					/* TODO */

				};



				l8 {

					regulator-min-microvolt = <1800000>;

					regulator-max-microvolt = <1800000>;

				};



				l9 {

					regulator-min-microvolt = <1800000>;

					regulator-max-microvolt = <1800000>;

				};



				l10 {

					regulator-min-microvolt = <1800000>;

					regulator-max-microvolt = <1800000>;

					qcom,init-voltage = <1800000>;

				};



				l11 {

					regulator-min-microvolt = <1200000>;

					regulator-max-microvolt = <1200000>;

					qcom,init-voltage = <1200000>;

				};



				l12 {

					regulator-min-microvolt = <1800000>;

					regulator-max-microvolt = <1800000>;

					qcom,init-voltage = <1800000>;

					proxy-supply = <&pm8994_l12>;

					qcom,proxy-consumer-enable;

					qcom,proxy-consumer-current = <10000>;

					status = "okay";

				};



				l13 {

					regulator-min-microvolt = <1800000>;

					regulator-max-microvolt = <2950000>;

					qcom,init-voltage = <2950000>;

					status = "okay";

				};



				l14 {

					regulator-min-microvolt = <1200000>;

					regulator-max-microvolt = <1200000>;

					qcom,init-voltage = <1200000>;

					proxy-supply = <&pm8994_l14>;

					qcom,proxy-consumer-enable;

					qcom,proxy-consumer-current = <10000>;

					status = "okay";

				};



				l15 {

					regulator-min-microvolt = <1800000>;

					regulator-max-microvolt = <1800000>;

					qcom,init-voltage = <1800000>;

					status = "okay";

				};



				l16 {

					regulator-min-microvolt = <2700000>;

					regulator-max-microvolt = <2700000>;

					qcom,init-voltage = <2700000>;

					status = "okay";

				};



				l17 {

					regulator-min-microvolt = <2700000>;

					regulator-max-microvolt = <2700000>;

					qcom,init-voltage = <2700000>;

					status = "okay";

				};



				l18 {

					regulator-min-microvolt = <3000000>;

					regulator-max-microvolt = <3000000>;

					regulator-always-on;

					qcom,init-voltage = <3000000>;

					qcom,init-ldo-mode = <1>;

				};



				l19 {

					regulator-min-microvolt = <1800000>;

					regulator-max-microvolt = <1800000>;

					qcom,init-voltage = <1800000>;

					status = "okay";

				};



				l20 {

					regulator-min-microvolt = <2950000>;

					regulator-max-microvolt = <2950000>;

					regulator-always-on;

					regulator-boot-on;

					regulator-allow-set-load;

					regulator-system-load = <570000>;

				};



				l21 {

					regulator-min-microvolt = <1800000>;

					regulator-max-microvolt = <1800000>;

					regulator-always-on;

					qcom,init-voltage = <1800000>;

				};



				l22 {

					regulator-min-microvolt = <3100000>;

					regulator-max-microvolt = <3100000>;

					qcom,init-voltage = <3100000>;

				};



				l23 {

					regulator-min-microvolt = <2800000>;

					regulator-max-microvolt = <2800000>;

					qcom,init-voltage = <2800000>;

				};



				l24 {

					regulator-min-microvolt = <3075000>;

					regulator-max-microvolt = <3150000>;

					qcom,init-voltage = <3075000>;

				};



				l25 {

					regulator-min-microvolt = <1800000>;

					regulator-max-microvolt = <1800000>;

					qcom,init-voltage = <1800000>;

				};



				l26 {

					/* TODO: value from downstream

					regulator-min-microvolt = <987500>;

					fails to apply */

				};



				l27 {

					regulator-min-microvolt = <1050000>;

					regulator-max-microvolt = <1050000>;

					qcom,init-voltage = <1050000>;

				};



				l28 {

					regulator-min-microvolt = <1000000>;

					regulator-max-microvolt = <1000000>;

					qcom,init-voltage = <1000000>;

					proxy-supply = <&pm8994_l28>;

					qcom,proxy-consumer-enable;

					qcom,proxy-consumer-current = <10000>;

				};



				l29 {

					/* TODO: Unsupported voltage range.

					regulator-min-microvolt = <2800000>;

					regulator-max-microvolt = <2800000>;

					qcom,init-voltage = <2800000>;

					*/

				};



				l30 {

					/* TODO: get this verified

					regulator-min-microvolt = <1800000>;

					regulator-max-microvolt = <1800000>;

					qcom,init-voltage = <1800000>;

					*/

				};



				l31 {

					regulator-min-microvolt = <1262500>;

					regulator-max-microvolt = <1262500>;

					qcom,init-voltage = <1262500>;

				};



				l32 {

					/* TODO: get this verified

					regulator-min-microvolt = <1800000>;

					regulator-max-microvolt = <1800000>;

					qcom,init-voltage = <1800000>;

					*/

				};

			};

		};

	};

};

CRA Git | Maintained and supported by SUSTech CRA and CCSE