mtd: spi-nor: copy the SPI NOR commands to a new header file

#ifndef __LINUX_MTD_SPI_NOR_H

#define __LINUX_MTD_SPI_NOR_H

/* Flash opcodes. */

#define	OPCODE_WREN		0x06	/* Write enable */

#define	OPCODE_RDSR		0x05	/* Read status register */

#define	OPCODE_WRSR		0x01	/* Write status register 1 byte */

#define	OPCODE_NORM_READ	0x03	/* Read data bytes (low frequency) */

#define	OPCODE_FAST_READ	0x0b	/* Read data bytes (high frequency) */

#define	OPCODE_DUAL_READ        0x3b    /* Read data bytes (Dual SPI) */

#define	OPCODE_QUAD_READ        0x6b    /* Read data bytes (Quad SPI) */

#define	OPCODE_PP		0x02	/* Page program (up to 256 bytes) */

#define	OPCODE_BE_4K		0x20	/* Erase 4KiB block */

#define	OPCODE_BE_4K_PMC	0xd7	/* Erase 4KiB block on PMC chips */

#define	OPCODE_BE_32K		0x52	/* Erase 32KiB block */

#define	OPCODE_CHIP_ERASE	0xc7	/* Erase whole flash chip */

#define	OPCODE_SE		0xd8	/* Sector erase (usually 64KiB) */

#define	OPCODE_RDID		0x9f	/* Read JEDEC ID */

#define	OPCODE_RDCR             0x35    /* Read configuration register */

/* 4-byte address opcodes - used on Spansion and some Macronix flashes. */

#define	OPCODE_NORM_READ_4B	0x13	/* Read data bytes (low frequency) */

#define	OPCODE_FAST_READ_4B	0x0c	/* Read data bytes (high frequency) */

#define	OPCODE_DUAL_READ_4B	0x3c    /* Read data bytes (Dual SPI) */

#define	OPCODE_QUAD_READ_4B	0x6c    /* Read data bytes (Quad SPI) */

#define	OPCODE_PP_4B		0x12	/* Page program (up to 256 bytes) */

#define	OPCODE_SE_4B		0xdc	/* Sector erase (usually 64KiB) */

/* Used for SST flashes only. */

#define	OPCODE_BP		0x02	/* Byte program */

#define	OPCODE_WRDI		0x04	/* Write disable */

#define	OPCODE_AAI_WP		0xad	/* Auto address increment word program */

/* Used for Macronix and Winbond flashes. */

#define	OPCODE_EN4B		0xb7	/* Enter 4-byte mode */

#define	OPCODE_EX4B		0xe9	/* Exit 4-byte mode */

/* Used for Spansion flashes only. */

#define	OPCODE_BRWR		0x17	/* Bank register write */

/* Status Register bits. */

#define	SR_WIP			1	/* Write in progress */

#define	SR_WEL			2	/* Write enable latch */

/* meaning of other SR_* bits may differ between vendors */

#define	SR_BP0			4	/* Block protect 0 */

#define	SR_BP1			8	/* Block protect 1 */

#define	SR_BP2			0x10	/* Block protect 2 */

#define	SR_SRWD			0x80	/* SR write protect */

#define SR_QUAD_EN_MX           0x40    /* Macronix Quad I/O */

/* Configuration Register bits. */

#define CR_QUAD_EN_SPAN		0x2     /* Spansion Quad I/O */

#endif