Commit f2a22e1e authored by Beniamin Bia's avatar Beniamin Bia Committed by Jonathan Cameron
Browse files

iio: adc: ad7606: Add support for software mode for ad7616 



Support for ad7616 running in software was added. In order
to activate the software mode, HW_RNGSEL pins must be pulled low.
Oversampling and input ranges are now configured in corresponding
registers. Ad7616 has multiple scale options when it is configured
in software mode.
Also, in order to support multiple devices in software mode, the spi
calculation of registers address must be generic. Because
the length of address and bit which specifies the read/write operation is
different for every device, calculation of address was made generic.

Signed-off-by: default avatarBeniamin Bia <beniamin.bia@analog.com>
Signed-off-by: default avatarJonathan Cameron <Jonathan.Cameron@huawei.com>
parent c5d93137

drivers/iio/adc/ad7606.c

+9 −0
Original line number Diff line number Diff line
@@ -35,6 +35,11 @@ static const unsigned int ad7606_scale_avail[2] = { 
	152588, 305176

};





static const unsigned int ad7616_sw_scale_avail[3] = {

	76293, 152588, 305176

};



static const unsigned int ad7606_oversampling_avail[7] = {

	1, 2, 4, 8, 16, 32, 64,

};
@@ -606,6 +611,10 @@ int ad7606_probe(struct device *dev, int irq, void __iomem *base_address, 
							 "adi,sw-mode");



	if (st->sw_mode_en) {

		/* Scale of 0.076293 is only available in sw mode */

		st->scale_avail = ad7616_sw_scale_avail;

		st->num_scales = ARRAY_SIZE(ad7616_sw_scale_avail);



		/* After reset, in software mode, ±10 V is set by default */

		memset32(st->range, 2, ARRAY_SIZE(st->range));

		indio_dev->info = &ad7606_info_os_and_range;

drivers/iio/adc/ad7606.h

+30 −8
Original line number Diff line number Diff line
@@ -8,14 +8,14 @@ 
#ifndef IIO_ADC_AD7606_H_

#define IIO_ADC_AD7606_H_



#define AD760X_CHANNEL(num, mask) {				\

#define AD760X_CHANNEL(num, mask_sep, mask_type, mask_all) {	\

		.type = IIO_VOLTAGE,				\

		.indexed = 1,					\

		.channel = num,					\

		.address = num,					\

		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),	\

		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),\

		.info_mask_shared_by_all = mask,		\

		.info_mask_separate = mask_sep,			\

		.info_mask_shared_by_type = mask_type,		\

		.info_mask_shared_by_all = mask_all,		\

		.scan_index = num,				\

		.scan_type = {					\

			.sign = 's',				\
@@ -26,10 +26,17 @@ 
}



#define AD7605_CHANNEL(num)				\

	AD760X_CHANNEL(num, 0)

	AD760X_CHANNEL(num, BIT(IIO_CHAN_INFO_RAW),	\

		BIT(IIO_CHAN_INFO_SCALE), 0)



#define AD7606_CHANNEL(num)				\

	AD760X_CHANNEL(num, BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO))

	AD760X_CHANNEL(num, BIT(IIO_CHAN_INFO_RAW),	\

		BIT(IIO_CHAN_INFO_SCALE),		\

		BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO))



#define AD7616_CHANNEL(num)	\

	AD760X_CHANNEL(num, BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),\

		0, BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO))



/**

 * struct ad7606_chip_info - chip specific information
@@ -77,6 +84,7 @@ struct ad7606_chip_info { 
 * @complete		completion to indicate end of conversion

 * @trig		The IIO trigger associated with the device.

 * @data		buffer for reading data from the device

 * @d16			be16 buffer for reading data from the device

 */

struct ad7606_state {

	struct device			*dev;
@@ -110,6 +118,7 @@ struct ad7606_state { 
	 * 16 * 16-bit samples + 64-bit timestamp

	 */

	unsigned short			data[20] ____cacheline_aligned;

	__be16				d16[2];

};



/**
@@ -117,11 +126,24 @@ struct ad7606_state { 
 * @read_block		function pointer for reading blocks of data

 * @sw_mode_config:	pointer to a function which configured the device

 *			for software mode

 * @reg_read	function pointer for reading spi register

 * @reg_write	function pointer for writing spi register

 * @write_mask	function pointer for write spi register with mask

 * @rd_wr_cmd	pointer to the function which calculates the spi address

 */

struct ad7606_bus_ops {

	/* more methods added in future? */

	int (*read_block)(struct device *dev, int num, void *data);

	int (*sw_mode_config)(struct iio_dev *indio_dev);

	int (*reg_read)(struct ad7606_state *st, unsigned int addr);

	int (*reg_write)(struct ad7606_state *st,

				unsigned int addr,

				unsigned int val);

	int (*write_mask)(struct ad7606_state *st,

				 unsigned int addr,

				 unsigned long mask,

				 unsigned int val);

	u16 (*rd_wr_cmd)(int addr, char isWriteOp);

};



int ad7606_probe(struct device *dev, int irq, void __iomem *base_address,

drivers/iio/adc/ad7606_spi.c

+174 −1
Original line number Diff line number Diff line
@@ -15,6 +15,51 @@ 


#define MAX_SPI_FREQ_HZ		23500000	/* VDRIVE above 4.75 V */



#define AD7616_CONFIGURATION_REGISTER	0x02

#define AD7616_OS_MASK			GENMASK(4, 2)

#define AD7616_BURST_MODE		BIT(6)

#define AD7616_SEQEN_MODE		BIT(5)

#define AD7616_RANGE_CH_A_ADDR_OFF	0x04

#define AD7616_RANGE_CH_B_ADDR_OFF	0x06

/*

 * Range of channels from a group are stored in 2 registers.

 * 0, 1, 2, 3 in a register followed by 4, 5, 6, 7 in second register.

 * For channels from second group(8-15) the order is the same, only with

 * an offset of 2 for register address.

 */

#define AD7616_RANGE_CH_ADDR(ch)	((ch) >> 2)

/* The range of the channel is stored on 2 bits*/

#define AD7616_RANGE_CH_MSK(ch)		(0b11 << (((ch) & 0b11) * 2))

#define AD7616_RANGE_CH_MODE(ch, mode)	((mode) << ((((ch) & 0b11)) * 2))

static const struct iio_chan_spec ad7616_sw_channels[] = {

	IIO_CHAN_SOFT_TIMESTAMP(16),

	AD7616_CHANNEL(0),

	AD7616_CHANNEL(1),

	AD7616_CHANNEL(2),

	AD7616_CHANNEL(3),

	AD7616_CHANNEL(4),

	AD7616_CHANNEL(5),

	AD7616_CHANNEL(6),

	AD7616_CHANNEL(7),

	AD7616_CHANNEL(8),

	AD7616_CHANNEL(9),

	AD7616_CHANNEL(10),

	AD7616_CHANNEL(11),

	AD7616_CHANNEL(12),

	AD7616_CHANNEL(13),

	AD7616_CHANNEL(14),

	AD7616_CHANNEL(15),

};



static u16 ad7616_spi_rd_wr_cmd(int addr, char isWriteOp)

{

	/*

	 * The address of register consist of one w/r bit

	 * 6 bits of address followed by one reserved bit.

	 */

	return ((addr & 0x7F) << 1) | ((isWriteOp & 0x1) << 7);

}



static int ad7606_spi_read_block(struct device *dev,

				 int count, void *buf)

{
@@ -35,17 +80,145 @@ static int ad7606_spi_read_block(struct device *dev, 
	return 0;

}



static int ad7606_spi_reg_read(struct ad7606_state *st, unsigned int addr)

{

	struct spi_device *spi = to_spi_device(st->dev);

	struct spi_transfer t[] = {

		{

			.tx_buf = &st->d16[0],

			.len = 2,

			.cs_change = 0,

		}, {

			.rx_buf = &st->d16[1],

			.len = 2,

		},

	};

	int ret;



	st->d16[0] = cpu_to_be16(st->bops->rd_wr_cmd(addr, 0) << 8);



	ret = spi_sync_transfer(spi, t, ARRAY_SIZE(t));

	if (ret < 0)

		return ret;



	return be16_to_cpu(st->d16[1]);

}



static int ad7606_spi_reg_write(struct ad7606_state *st,

				unsigned int addr,

				unsigned int val)

{

	struct spi_device *spi = to_spi_device(st->dev);



	st->d16[0] = cpu_to_be16((st->bops->rd_wr_cmd(addr, 1) << 8) |

				  (val & 0x1FF));



	return spi_write(spi, &st->d16[0], sizeof(st->d16[0]));

}



static int ad7606_spi_write_mask(struct ad7606_state *st,

				 unsigned int addr,

				 unsigned long mask,

				 unsigned int val)

{

	int readval;



	readval = st->bops->reg_read(st, addr);

	if (readval < 0)

		return readval;



	readval &= ~mask;

	readval |= val;



	return st->bops->reg_write(st, addr, readval);

}



static int ad7616_write_scale_sw(struct iio_dev *indio_dev, int ch, int val)

{

	struct ad7606_state *st = iio_priv(indio_dev);

	unsigned int ch_addr, mode, ch_index;





	/*

	 * Ad7616 has 16 channels divided in group A and group B.

	 * The range of channels from A are stored in registers with address 4

	 * while channels from B are stored in register with address 6.

	 * The last bit from channels determines if it is from group A or B

	 * because the order of channels in iio is 0A, 0B, 1A, 1B...

	 */

	ch_index = ch >> 1;



	ch_addr = AD7616_RANGE_CH_ADDR(ch_index);



	if ((ch & 0x1) == 0) /* channel A */

		ch_addr += AD7616_RANGE_CH_A_ADDR_OFF;

	else	/* channel B */

		ch_addr += AD7616_RANGE_CH_B_ADDR_OFF;



	/* 0b01 for 2.5v, 0b10 for 5v and 0b11 for 10v */

	mode = AD7616_RANGE_CH_MODE(ch_index, ((val + 1) & 0b11));

	return st->bops->write_mask(st, ch_addr, AD7616_RANGE_CH_MSK(ch_index),

				     mode);

}



static int ad7616_write_os_sw(struct iio_dev *indio_dev, int val)

{

	struct ad7606_state *st = iio_priv(indio_dev);



	return st->bops->write_mask(st, AD7616_CONFIGURATION_REGISTER,

				     AD7616_OS_MASK, val << 2);

}



static int ad7616_sw_mode_config(struct iio_dev *indio_dev)

{

	struct ad7606_state *st = iio_priv(indio_dev);



	/*

	 * Scale can be configured individually for each channel

	 * in software mode.

	 */

	indio_dev->channels = ad7616_sw_channels;



	st->write_scale = ad7616_write_scale_sw;

	st->write_os = &ad7616_write_os_sw;



	/* Activate Burst mode and SEQEN MODE */

	return st->bops->write_mask(st,

			      AD7616_CONFIGURATION_REGISTER,

			      AD7616_BURST_MODE | AD7616_SEQEN_MODE,

			      AD7616_BURST_MODE | AD7616_SEQEN_MODE);

}



static const struct ad7606_bus_ops ad7606_spi_bops = {

	.read_block = ad7606_spi_read_block,

};



static const struct ad7606_bus_ops ad7616_spi_bops = {

	.read_block = ad7606_spi_read_block,

	.reg_read = ad7606_spi_reg_read,

	.reg_write = ad7606_spi_reg_write,

	.write_mask = ad7606_spi_write_mask,

	.rd_wr_cmd = ad7616_spi_rd_wr_cmd,

	.sw_mode_config = ad7616_sw_mode_config,

};



static int ad7606_spi_probe(struct spi_device *spi)

{

	const struct spi_device_id *id = spi_get_device_id(spi);

	const struct ad7606_bus_ops *bops;



	switch (id->driver_data) {

	case ID_AD7616:

		bops = &ad7616_spi_bops;

		break;

	default:

		bops = &ad7606_spi_bops;

		break;

	}



	return ad7606_probe(&spi->dev, spi->irq, NULL,

			    id->name, id->driver_data,

			    &ad7606_spi_bops);

			    bops);

}



static const struct spi_device_id ad7606_id_table[] = {

CRA Git | Maintained and supported by SUSTech CRA and CCSE