Commit f1334fb3 authored by Yusuke Goda's avatar Yusuke Goda Committed by Samuel Ortiz
Browse files

mmc: Allow 2 byte requests in 4-bit mode for tmio_mmc 



Adjust the tmio_mmc block size check to accept 2-byte requests in 4-bit
mode if the hardware supports it.

Tested with the SDHI hardware block included in sh7724.

Signed-off-by: default avatarYusuke Goda <yusuke.goda.sx@renesas.com>
Signed-off-by: default avatarMatt Fleming <matt@console-pimps.org>
Acked-by: default avatarMagnus Damm <damm@opensource.se>
Tested-by: default avatarArnd Hannemann <arnd@arndnet.de>
Signed-off-by: default avatarSamuel Ortiz <sameo@linux.intel.com>
parent 68accd73

drivers/mfd/sh_mobile_sdhi.c

+6 −0
Original line number Diff line number Diff line
@@ -125,6 +125,12 @@ static int __devinit sh_mobile_sdhi_probe(struct platform_device *pdev) 
		mmc_data->capabilities |= p->tmio_caps;

	}



	/*

	 * All SDHI blocks support 2-byte and larger block sizes in 4-bit

	 * bus width mode.

	 */

	mmc_data->flags |= TMIO_MMC_BLKSZ_2BYTES;



	if (p && p->dma_slave_tx >= 0 && p->dma_slave_rx >= 0) {

		priv->param_tx.slave_id = p->dma_slave_tx;

		priv->param_rx.slave_id = p->dma_slave_rx;

drivers/mmc/host/tmio_mmc.c

+12 −5
Original line number Diff line number Diff line
@@ -658,15 +658,22 @@ static void tmio_mmc_release_dma(struct tmio_mmc_host *host) 
static int tmio_mmc_start_data(struct tmio_mmc_host *host,

	struct mmc_data *data)

{

	struct mfd_cell *cell = host->pdev->dev.platform_data;

	struct tmio_mmc_data *pdata = cell->driver_data;



	pr_debug("setup data transfer: blocksize %08x  nr_blocks %d\n",

		 data->blksz, data->blocks);



	/* Hardware cannot perform 1 and 2 byte requests in 4 bit mode */

	if (data->blksz < 4 && host->mmc->ios.bus_width == MMC_BUS_WIDTH_4) {

	/* Some hardware cannot perform 2 byte requests in 4 bit mode */

	if (host->mmc->ios.bus_width == MMC_BUS_WIDTH_4) {

		int blksz_2bytes = pdata->flags & TMIO_MMC_BLKSZ_2BYTES;



		if (data->blksz < 2 || (data->blksz < 4 && !blksz_2bytes)) {

			pr_err("%s: %d byte block unsupported in 4 bit mode\n",

			       mmc_hostname(host->mmc), data->blksz);

			return -EINVAL;

		}

	}



	tmio_mmc_init_sg(host, data);

	host->data = data;

include/linux/mfd/tmio.h

+5 −0
Original line number Diff line number Diff line
@@ -52,6 +52,11 @@ 


/* tmio MMC platform flags */

#define TMIO_MMC_WRPROTECT_DISABLE	(1 << 0)

/*

 * Some controllers can support a 2-byte block size when the bus width

 * is configured in 4-bit mode.

 */

#define TMIO_MMC_BLKSZ_2BYTES		(1 << 1)



int tmio_core_mmc_enable(void __iomem *cnf, int shift, unsigned long base);

int tmio_core_mmc_resume(void __iomem *cnf, int shift, unsigned long base);

CRA Git | Maintained and supported by SUSTech CRA and CCSE