Unverified Commit f09a433b authored by Amit Kumar Mahapatra's avatar Amit Kumar Mahapatra Committed by Mark Brown
Browse files

spi: spi-zynqmp-gqspi: Fix incorrect indentation 



Fixed incorrect indentation in ZynqMP qspi controller driver.

Signed-off-by: default avatarAmit Kumar Mahapatra <amit.kumar-mahapatra@xilinx.com>
Signed-off-by: default avatarMichal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/2b246b6f0925c8a2a767a4240e8738ffeefd62be.1600931476.git.michal.simek@xilinx.com


Signed-off-by: default avatarMark Brown <broonie@kernel.org>
parent 1c26372e

drivers/spi/spi-zynqmp-gqspi.c

+23 −23
Original line number Diff line number Diff line
@@ -386,7 +386,6 @@ static void zynqmp_qspi_chipselect(struct spi_device *qspi, bool is_high) 
		if ((statusreg & GQSPI_ISR_GENFIFOEMPTY_MASK) &&

		    (statusreg & GQSPI_ISR_TXEMPTY_MASK))

			break;

		else

		cpu_relax();

	} while (!time_after_eq(jiffies, timeout));
@@ -670,7 +669,8 @@ static void zynqmp_process_dma_irq(struct zynqmp_qspi *xqspi) 


		/* Manual start */

		zynqmp_gqspi_write(xqspi, GQSPI_CONFIG_OFST,

			(zynqmp_gqspi_read(xqspi, GQSPI_CONFIG_OFST) |

				   (zynqmp_gqspi_read(xqspi,

						      GQSPI_CONFIG_OFST) |

				   GQSPI_CFG_START_GEN_FIFO_MASK));



		/* Enable the RX interrupts for IO mode */
@@ -725,8 +725,8 @@ static irqreturn_t zynqmp_qspi_irq(int irq, void *dev_id) 
		ret = IRQ_HANDLED;

	}



	if ((xqspi->bytes_to_receive == 0) && (xqspi->bytes_to_transfer == 0)

			&& ((status & GQSPI_IRQ_MASK) == GQSPI_IRQ_MASK)) {

	if (xqspi->bytes_to_receive == 0 && xqspi->bytes_to_transfer == 0 &&

	    ((status & GQSPI_IRQ_MASK) == GQSPI_IRQ_MASK)) {

		zynqmp_gqspi_write(xqspi, GQSPI_IDR_OFST, GQSPI_ISR_IDR_MASK);

		complete(&xqspi->data_completion);

		ret = IRQ_HANDLED;
@@ -744,7 +744,7 @@ static void zynqmp_qspi_setuprxdma(struct zynqmp_qspi *xqspi) 
	dma_addr_t addr;

	u64 dma_align =  (u64)(uintptr_t)xqspi->rxbuf;



	if ((xqspi->bytes_to_receive < 8) ||

	if (xqspi->bytes_to_receive < 8 ||

	    ((dma_align & GQSPI_DMA_UNALIGN) != 0x0)) {

		/* Setting to IO mode */

		config_reg = zynqmp_gqspi_read(xqspi, GQSPI_CONFIG_OFST);

CRA Git | Maintained and supported by SUSTech CRA and CCSE