Commit f08b7e9f authored Mar 30, 2009 by Benjamin Herrenschmidt Committed by Paul Mackerras Apr 07, 2009

powerpc/pmac: Fix internal modem IRQ on Wallstreet PowerBook



The (relatively) new pmac_zilog driver doesn't use the pre-munged
IRQ numbers from the macio_dev unlike other macio things, it
directly maps it off the OF device-tree.

It does that because it can be initialized much earlier than the
registration of the macio devices, in order to get a serial
console early.

Unfortunately, that means that it "misses" some fixups done
by the macio layer to work around missing interrupt descriptions
in the device-tree of the Wallstreet machines.

This patch brings the necessary workaround into the pmac_zilog
driver itself to bring it back to working condition.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

parent b6966b1b

drivers/serial/pmac_zilog.c

+15 −0

Original line number	Diff line number	Diff line
		@@ -1538,6 +1538,21 @@ no_dma:
		uap->port.type = PORT_PMAC_ZILOG;
		uap->port.flags = 0;

		/*
		* Fixup for the port on Gatwick for which the device-tree has
		* missing interrupts. Normally, the macio_dev would contain
		* fixed up interrupt info, but we use the device-tree directly
		* here due to early probing so we need the fixup too.
		*/
		if (uap->port.irq == NO_IRQ &&
		np->parent && np->parent->parent &&
		of_device_is_compatible(np->parent->parent, "gatwick")) {
		/* IRQs on gatwick are offset by 64 */
		uap->port.irq = irq_create_mapping(NULL, 64 + 15);
		uap->tx_dma_irq = irq_create_mapping(NULL, 64 + 4);
		uap->rx_dma_irq = irq_create_mapping(NULL, 64 + 5);
		}

		/* Setup some valid baud rate information in the register
		* shadows so we don't write crap there before baud rate is
		* first initialized.

Admin message