Commit efa2ca73 authored by Robert Jarzmik's avatar Robert Jarzmik Committed by Artem Bityutskiy
Browse files

mtd: Add DiskOnChip G3 support 



Add support for DiskOnChip G3 chips. The support is quite
limited yet :
 - no flash writes/erases are implemented
 - ECC fixes are not implemented
 - powerdown is not implemented
 - IPL handling is not yet done

On the brighter side, the chip reading does work.

Signed-off-by: default avatarRobert Jarzmik <robert.jarzmik@free.fr>
parent 86a9893d

drivers/mtd/devices/Kconfig

+10 −0
Original line number Diff line number Diff line
@@ -249,6 +249,16 @@ config MTD_DOC2001PLUS 
	  under "NAND Flash Device Drivers" (currently that driver does not

	  support all Millennium Plus devices).



config MTD_DOCG3

	tristate "M-Systems Disk-On-Chip G3"

	---help---

	  This provides an MTD device driver for the M-Systems DiskOnChip

	  G3 devices.



	  The driver provides access to G3 DiskOnChip, distributed by

	  M-Systems and now Sandisk. The support is very experimental,

	  and doesn't give access to any write operations.



config MTD_DOCPROBE

	tristate

	select MTD_DOCECC

drivers/mtd/devices/Makefile

+3 −0
Original line number Diff line number Diff line
@@ -5,6 +5,7 @@ 
obj-$(CONFIG_MTD_DOC2000)	+= doc2000.o

obj-$(CONFIG_MTD_DOC2001)	+= doc2001.o

obj-$(CONFIG_MTD_DOC2001PLUS)	+= doc2001plus.o

obj-$(CONFIG_MTD_DOCG3)		+= docg3.o

obj-$(CONFIG_MTD_DOCPROBE)	+= docprobe.o

obj-$(CONFIG_MTD_DOCECC)	+= docecc.o

obj-$(CONFIG_MTD_SLRAM)		+= slram.o
@@ -17,3 +18,5 @@ obj-$(CONFIG_MTD_BLOCK2MTD) += block2mtd.o 
obj-$(CONFIG_MTD_DATAFLASH)	+= mtd_dataflash.o

obj-$(CONFIG_MTD_M25P80)	+= m25p80.o

obj-$(CONFIG_MTD_SST25L)	+= sst25l.o



CFLAGS_docg3.o			+= -I$(src)
 
 No newline at end of file

drivers/mtd/devices/docg3.c

0 → 100644
+1114 −0

File added.

Preview size limit exceeded, changes collapsed.

drivers/mtd/devices/docg3.h

0 → 100644
+297 −0
Original line number Diff line number Diff line 
/*

 * Handles the M-Systems DiskOnChip G3 chip

 *

 * Copyright (C) 2011 Robert Jarzmik

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License as published by

 * the Free Software Foundation; either version 2 of the License, or

 * (at your option) any later version.

 *

 * This program is distributed in the hope that it will be useful,

 * but WITHOUT ANY WARRANTY; without even the implied warranty of

 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 * GNU General Public License for more details.

 *

 * You should have received a copy of the GNU General Public License

 * along with this program; if not, write to the Free Software

 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA

 *

 */



#ifndef _MTD_DOCG3_H

#define _MTD_DOCG3_H



/*

 * Flash memory areas :

 *   - 0x0000 .. 0x07ff : IPL

 *   - 0x0800 .. 0x0fff : Data area

 *   - 0x1000 .. 0x17ff : Registers

 *   - 0x1800 .. 0x1fff : Unknown

 */

#define DOC_IOSPACE_IPL			0x0000

#define DOC_IOSPACE_DATA		0x0800

#define DOC_IOSPACE_SIZE		0x2000



/*

 * DOC G3 layout and adressing scheme

 *   A page address for the block "b", plane "P" and page "p":

 *   address = [bbbb bPpp pppp]

 */



#define DOC_ADDR_PAGE_MASK		0x3f

#define DOC_ADDR_BLOCK_SHIFT		6

#define DOC_LAYOUT_NBPLANES		2

#define DOC_LAYOUT_PAGES_PER_BLOCK	64

#define DOC_LAYOUT_PAGE_SIZE		512

#define DOC_LAYOUT_OOB_SIZE		16

#define DOC_LAYOUT_WEAR_SIZE		8

#define DOC_LAYOUT_PAGE_OOB_SIZE				\

	(DOC_LAYOUT_PAGE_SIZE + DOC_LAYOUT_OOB_SIZE)

#define DOC_LAYOUT_WEAR_OFFSET		(DOC_LAYOUT_PAGE_OOB_SIZE * 2)

#define DOC_LAYOUT_BLOCK_SIZE					\

	(DOC_LAYOUT_PAGES_PER_BLOCK * DOC_LAYOUT_PAGE_SIZE)

#define DOC_ECC_BCH_SIZE		7

#define DOC_ECC_BCH_COVERED_BYTES				\

	(DOC_LAYOUT_PAGE_SIZE + DOC_LAYOUT_OOB_PAGEINFO_SZ +	\

	 DOC_LAYOUT_OOB_HAMMING_SZ + DOC_LAYOUT_OOB_BCH_SZ)



/*

 * Blocks distribution

 */

#define DOC_LAYOUT_BLOCK_BBT		0

#define DOC_LAYOUT_BLOCK_OTP		0

#define DOC_LAYOUT_BLOCK_FIRST_DATA	6



#define DOC_LAYOUT_PAGE_BBT		4



/*

 * Extra page OOB (16 bytes wide) layout

 */

#define DOC_LAYOUT_OOB_PAGEINFO_OFS	0

#define DOC_LAYOUT_OOB_HAMMING_OFS	7

#define DOC_LAYOUT_OOB_BCH_OFS		8

#define DOC_LAYOUT_OOB_UNUSED_OFS	15

#define DOC_LAYOUT_OOB_PAGEINFO_SZ	7

#define DOC_LAYOUT_OOB_HAMMING_SZ	1

#define DOC_LAYOUT_OOB_BCH_SZ		7

#define DOC_LAYOUT_OOB_UNUSED_SZ	1





#define DOC_CHIPID_G3			0x200

#define DOC_ERASE_MARK			0xaa

/*

 * Flash registers

 */

#define DOC_CHIPID			0x1000

#define DOC_TEST			0x1004

#define DOC_BUSLOCK			0x1006

#define DOC_ENDIANCONTROL		0x1008

#define DOC_DEVICESELECT		0x100a

#define DOC_ASICMODE			0x100c

#define DOC_CONFIGURATION		0x100e

#define DOC_INTERRUPTCONTROL		0x1010

#define DOC_READADDRESS			0x101a

#define DOC_DATAEND			0x101e

#define DOC_INTERRUPTSTATUS		0x1020



#define DOC_FLASHSEQUENCE		0x1032

#define DOC_FLASHCOMMAND		0x1034

#define DOC_FLASHADDRESS		0x1036

#define DOC_FLASHCONTROL		0x1038

#define DOC_NOP				0x103e



#define DOC_ECCCONF0			0x1040

#define DOC_ECCCONF1			0x1042

#define DOC_ECCPRESET			0x1044

#define DOC_HAMMINGPARITY		0x1046

#define DOC_BCH_SYNDROM(idx)		(0x1048 + (idx << 1))



#define DOC_PROTECTION			0x1056

#define DOC_DPS0_ADDRLOW		0x1060

#define DOC_DPS0_ADDRHIGH		0x1062

#define DOC_DPS1_ADDRLOW		0x1064

#define DOC_DPS1_ADDRHIGH		0x1066

#define DOC_DPS0_STATUS			0x106c

#define DOC_DPS1_STATUS			0x106e



#define DOC_ASICMODECONFIRM		0x1072

#define DOC_CHIPID_INV			0x1074



/*

 * Flash sequences

 * A sequence is preset before one or more commands are input to the chip.

 */

#define DOC_SEQ_RESET			0x00

#define DOC_SEQ_PAGE_SIZE_532		0x03

#define DOC_SEQ_SET_MODE		0x09

#define DOC_SEQ_READ			0x12

#define DOC_SEQ_SET_PLANE1		0x0e

#define DOC_SEQ_SET_PLANE2		0x10

#define DOC_SEQ_PAGE_SETUP		0x1d



/*

 * Flash commands

 */

#define DOC_CMD_READ_PLANE1		0x00

#define DOC_CMD_SET_ADDR_READ		0x05

#define DOC_CMD_READ_ALL_PLANES		0x30

#define DOC_CMD_READ_PLANE2		0x50

#define DOC_CMD_READ_FLASH		0xe0

#define DOC_CMD_PAGE_SIZE_532		0x3c



#define DOC_CMD_PROG_BLOCK_ADDR		0x60

#define DOC_CMD_PROG_CYCLE1		0x80

#define DOC_CMD_PROG_CYCLE2		0x10

#define DOC_CMD_ERASECYCLE2		0xd0



#define DOC_CMD_RELIABLE_MODE		0x22

#define DOC_CMD_FAST_MODE		0xa2



#define DOC_CMD_RESET			0xff



/*

 * Flash register : DOC_FLASHCONTROL

 */

#define DOC_CTRL_VIOLATION		0x20

#define DOC_CTRL_CE			0x10

#define DOC_CTRL_UNKNOWN_BITS		0x08

#define DOC_CTRL_PROTECTION_ERROR	0x04

#define DOC_CTRL_SEQUENCE_ERROR		0x02

#define DOC_CTRL_FLASHREADY		0x01



/*

 * Flash register : DOC_ASICMODE

 */

#define DOC_ASICMODE_RESET		0x00

#define DOC_ASICMODE_NORMAL		0x01

#define DOC_ASICMODE_POWERDOWN		0x02

#define DOC_ASICMODE_MDWREN		0x04

#define DOC_ASICMODE_BDETCT_RESET	0x08

#define DOC_ASICMODE_RSTIN_RESET	0x10

#define DOC_ASICMODE_RAM_WE		0x20



/*

 * Flash register : DOC_ECCCONF0

 */

#define DOC_ECCCONF0_READ_MODE		0x8000

#define DOC_ECCCONF0_AUTO_ECC_ENABLE	0x4000

#define DOC_ECCCONF0_HAMMING_ENABLE	0x1000

#define DOC_ECCCONF0_BCH_ENABLE		0x0800

#define DOC_ECCCONF0_DATA_BYTES_MASK	0x07ff



/*

 * Flash register : DOC_ECCCONF1

 */

#define DOC_ECCCONF1_BCH_SYNDROM_ERR	0x80

#define DOC_ECCCONF1_UNKOWN1		0x40

#define DOC_ECCCONF1_UNKOWN2		0x20

#define DOC_ECCCONF1_UNKOWN3		0x10

#define DOC_ECCCONF1_HAMMING_BITS_MASK	0x0f



/*

 * Flash register : DOC_PROTECTION

 */

#define DOC_PROTECT_FOUNDRY_OTP_LOCK	0x01

#define DOC_PROTECT_CUSTOMER_OTP_LOCK	0x02

#define DOC_PROTECT_LOCK_INPUT		0x04

#define DOC_PROTECT_STICKY_LOCK		0x08

#define DOC_PROTECT_PROTECTION_ENABLED	0x10

#define DOC_PROTECT_IPL_DOWNLOAD_LOCK	0x20

#define DOC_PROTECT_PROTECTION_ERROR	0x80



/*

 * Flash register : DOC_DPS0_STATUS and DOC_DPS1_STATUS

 */

#define DOC_DPS_OTP_PROTECTED		0x01

#define DOC_DPS_READ_PROTECTED		0x02

#define DOC_DPS_WRITE_PROTECTED		0x04

#define DOC_DPS_HW_LOCK_ENABLED		0x08

#define DOC_DPS_KEY_OK			0x80



/*

 * Flash register : DOC_CONFIGURATION

 */

#define DOC_CONF_IF_CFG			0x80

#define DOC_CONF_MAX_ID_MASK		0x30

#define DOC_CONF_VCCQ_3V		0x01



/*

 * Flash register : DOC_READADDRESS

 */

#define DOC_READADDR_INC		0x8000

#define DOC_READADDR_ONE_BYTE		0x4000

#define DOC_READADDR_ADDR_MASK		0x1fff



/**

 * struct docg3 - DiskOnChip driver private data

 * @dev: the device currently under control

 * @base: mapped IO space

 * @device_id: number of the cascaded DoCG3 device (0, 1, 2 or 3)

 * @if_cfg: if true, reads are on 16bits, else reads are on 8bits

 * @bbt: bad block table cache

 * @debugfs_root: debugfs root node

 */

struct docg3 {

	struct device *dev;

	void __iomem *base;

	unsigned int device_id:4;

	unsigned int if_cfg:1;

	int max_block;

	u8 *bbt;

	struct dentry *debugfs_root;

};



#define doc_err(fmt, arg...) dev_err(docg3->dev, (fmt), ## arg)

#define doc_info(fmt, arg...) dev_info(docg3->dev, (fmt), ## arg)

#define doc_dbg(fmt, arg...) dev_dbg(docg3->dev, (fmt), ## arg)

#define doc_vdbg(fmt, arg...) dev_vdbg(docg3->dev, (fmt), ## arg)



#define DEBUGFS_RO_ATTR(name, show_fct) \

	static int name##_open(struct inode *inode, struct file *file) \

	{ return single_open(file, show_fct, inode->i_private); }      \

	static const struct file_operations name##_fops = { \

		.owner = THIS_MODULE, \

		.open = name##_open, \

		.llseek = seq_lseek, \

		.read = seq_read, \

		.release = single_release \

	};

#endif



/*

 * Trace events part

 */

#undef TRACE_SYSTEM

#define TRACE_SYSTEM docg3



#if !defined(_MTD_DOCG3_TRACE) || defined(TRACE_HEADER_MULTI_READ)

#define _MTD_DOCG3_TRACE



#include <linux/tracepoint.h>



TRACE_EVENT(docg3_io,

	    TP_PROTO(int op, int width, u16 reg, int val),

	    TP_ARGS(op, width, reg, val),

	    TP_STRUCT__entry(

		    __field(int, op)

		    __field(unsigned char, width)

		    __field(u16, reg)

		    __field(int, val)),

	    TP_fast_assign(

		    __entry->op = op;

		    __entry->width = width;

		    __entry->reg = reg;

		    __entry->val = val;),

	    TP_printk("docg3: %s%02d reg=%04x, val=%04x",

		      __entry->op ? "write" : "read", __entry->width,

		      __entry->reg, __entry->val)

	);

#endif



/* This part must be outside protection */

#undef TRACE_INCLUDE_PATH

#undef TRACE_INCLUDE_FILE

#define TRACE_INCLUDE_PATH .

#define TRACE_INCLUDE_FILE docg3

#include <trace/define_trace.h>

CRA Git | Maintained and supported by SUSTech CRA and CCSE