Commit ee9a97db authored by Tony Lindgren's avatar Tony Lindgren
Browse files

ARM: dts: Move most of omap5-uevm.dts to omap5-board-common.dtsi 



Looks like thevarious omap5-uevm models and igepv5 are very similar. So let's
create omap5-board-common.dtsi to allow fixing up things properly for mainline
kernel to support all these.

Even if we eventually end up having only PMIC + MMC + eMMC + SDIO WLAN + SATA +
USB + HDMI configuration in the omap5-board-common.dtsi, this is the easiest
way to add support for other boards rather than diffing various versions of
out of tree dts files.

My guess is that also omap5-sbc-t54.dts can use this, but I don't have that
board so that will need to be dealt with later on.

Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
parent 0efc898a

arch/arm/boot/dts/omap5-board-common.dtsi

0 → 100644
+655 −0
Original line number Diff line number Diff line 
/*

 * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License version 2 as

 * published by the Free Software Foundation.

 */

#include "omap5.dtsi"

#include <dt-bindings/interrupt-controller/irq.h>

#include <dt-bindings/interrupt-controller/arm-gic.h>



/ {

	aliases {

		display0 = &hdmi0;

	};



	vmmcsd_fixed: fixedregulator-mmcsd {

		compatible = "regulator-fixed";

		regulator-name = "vmmcsd_fixed";

		regulator-min-microvolt = <3000000>;

		regulator-max-microvolt = <3000000>;

	};



	mmc3_pwrseq: sdhci0_pwrseq {

		compatible = "mmc-pwrseq-simple";

		clocks = <&clk32kgaudio>;

		clock-names = "ext_clock";

	};



	vmmcsdio_fixed: fixedregulator-mmcsdio {

		compatible = "regulator-fixed";

		regulator-name = "vmmcsdio_fixed";

		regulator-min-microvolt = <1800000>;

		regulator-max-microvolt = <1800000>;

		gpio = <&gpio5 12 GPIO_ACTIVE_HIGH>;	/* gpio140 WLAN_EN */

		enable-active-high;

		startup-delay-us = <70000>;

		pinctrl-names = "default";

		pinctrl-0 = <&wlan_pins>;

	};



	/* HS USB Host PHY on PORT 2 */

	hsusb2_phy: hsusb2_phy {

		compatible = "usb-nop-xceiv";

		reset-gpios = <&gpio3 16 GPIO_ACTIVE_LOW>; /* gpio3_80 HUB_NRESET */

		clocks = <&auxclk1_ck>;

		clock-names = "main_clk";

		clock-frequency = <19200000>;

	};



	/* HS USB Host PHY on PORT 3 */

	hsusb3_phy: hsusb3_phy {

		compatible = "usb-nop-xceiv";

		reset-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>; /* gpio3_79 ETH_NRESET */

	};



	leds {

		compatible = "gpio-leds";

		led@1 {

			label = "omap5:blue:usr1";

			gpios = <&gpio5 25 GPIO_ACTIVE_HIGH>; /* gpio5_153 D1 LED */

			linux,default-trigger = "heartbeat";

			default-state = "off";

		};

	};



	tpd12s015: encoder@0 {

		compatible = "ti,tpd12s015";



		pinctrl-names = "default";

		pinctrl-0 = <&tpd12s015_pins>;



		/* gpios defined in the board specific dts */



		ports {

			#address-cells = <1>;

			#size-cells = <0>;



			port@0 {

				reg = <0>;



				tpd12s015_in: endpoint@0 {

					remote-endpoint = <&hdmi_out>;

				};

			};



			port@1 {

				reg = <1>;



				tpd12s015_out: endpoint@0 {

					remote-endpoint = <&hdmi_connector_in>;

				};

			};

		};

	};



	hdmi0: connector@0 {

		compatible = "hdmi-connector";

		label = "hdmi";



		type = "b";



		port {

			hdmi_connector_in: endpoint {

				remote-endpoint = <&tpd12s015_out>;

			};

		};

	};



	sound: sound {

		compatible = "ti,abe-twl6040";

		ti,model = "omap5-uevm";



		ti,mclk-freq = <19200000>;



		ti,mcpdm = <&mcpdm>;



		ti,twl6040 = <&twl6040>;



		/* Audio routing */

		ti,audio-routing =

			"Headset Stereophone", "HSOL",

			"Headset Stereophone", "HSOR",

			"Line Out", "AUXL",

			"Line Out", "AUXR",

			"HSMIC", "Headset Mic",

			"Headset Mic", "Headset Mic Bias",

			"AFML", "Line In",

			"AFMR", "Line In";

	};

};



&omap5_pmx_core {

	pinctrl-names = "default";

	pinctrl-0 = <

			&usbhost_pins

			&led_gpio_pins

	>;



	twl6040_pins: pinmux_twl6040_pins {

		pinctrl-single,pins = <

			0x17e (PIN_OUTPUT | MUX_MODE6)	/* mcspi1_somi.gpio5_141 */

		>;

	};



	mcpdm_pins: pinmux_mcpdm_pins {

		pinctrl-single,pins = <

			0x142 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_clks.abe_clks */

			0x15c (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abemcpdm_ul_data.abemcpdm_ul_data */

			0x15e (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abemcpdm_dl_data.abemcpdm_dl_data */

			0x160 (PIN_INPUT_PULLUP | MUX_MODE0)	/* abemcpdm_frame.abemcpdm_frame */

			0x162 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abemcpdm_lb_clk.abemcpdm_lb_clk */

		>;

	};



	mcbsp1_pins: pinmux_mcbsp1_pins {

		pinctrl-single,pins = <

			0x14c (PIN_INPUT | MUX_MODE1)		/* abedmic_clk2.abemcbsp1_fsx */

			0x14e (PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* abedmic_clk3.abemcbsp1_dx */

			0x150 (PIN_INPUT | MUX_MODE1)		/* abeslimbus1_clock.abemcbsp1_clkx */

			0x152 (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* abeslimbus1_data.abemcbsp1_dr */

		>;

	};



	mcbsp2_pins: pinmux_mcbsp2_pins {

		pinctrl-single,pins = <

			0x154 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abemcbsp2_dr.abemcbsp2_dr */

			0x156 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* abemcbsp2_dx.abemcbsp2_dx */

			0x158 (PIN_INPUT | MUX_MODE0)		/* abemcbsp2_fsx.abemcbsp2_fsx */

			0x15a (PIN_INPUT | MUX_MODE0)		/* abemcbsp2_clkx.abemcbsp2_clkx */

		>;

	};



	i2c1_pins: pinmux_i2c1_pins {

		pinctrl-single,pins = <

			0x1b2 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_scl */

			0x1b4 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_sda */

		>;

	};



	mcspi2_pins: pinmux_mcspi2_pins {

		pinctrl-single,pins = <

			0xbc (PIN_INPUT | MUX_MODE0)		/*  mcspi2_clk */

			0xbe (PIN_INPUT | MUX_MODE0)		/*  mcspi2_simo */

			0xc0 (PIN_INPUT_PULLUP | MUX_MODE0)	/*  mcspi2_somi */

			0xc2 (PIN_OUTPUT | MUX_MODE0)		/*  mcspi2_cs0 */

		>;

	};



	mcspi3_pins: pinmux_mcspi3_pins {

		pinctrl-single,pins = <

			0x78 (PIN_INPUT | MUX_MODE1)		/*  mcspi3_somi */

			0x7a (PIN_INPUT | MUX_MODE1)		/*  mcspi3_cs0 */

			0x7c (PIN_INPUT | MUX_MODE1)		/*  mcspi3_simo */

			0x7e (PIN_INPUT | MUX_MODE1)		/*  mcspi3_clk */

		>;

	};



	mmc3_pins: pinmux_mmc3_pins {

		pinctrl-single,pins = <

			OMAP5_IOPAD(0x01a4, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_clk */

			OMAP5_IOPAD(0x01a6, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_cmd */

			OMAP5_IOPAD(0x01a8, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data0 */

			OMAP5_IOPAD(0x01aa, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data1 */

			OMAP5_IOPAD(0x01ac, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data2 */

			OMAP5_IOPAD(0x01ae, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data3 */

		>;

	};



	wlan_pins: pinmux_wlan_pins {

		pinctrl-single,pins = <

			OMAP5_IOPAD(0x1bc, PIN_OUTPUT | MUX_MODE6) /* mcspi1_clk.gpio5_140 */

		>;

	};



	usbhost_pins: pinmux_usbhost_pins {

		pinctrl-single,pins = <

			0x84 (PIN_INPUT | MUX_MODE0) /* usbb2_hsic_strobe */

			0x86 (PIN_INPUT | MUX_MODE0) /* usbb2_hsic_data */



			0x19e (PIN_INPUT | MUX_MODE0) /* usbb3_hsic_strobe */

			0x1a0 (PIN_INPUT | MUX_MODE0) /* usbb3_hsic_data */



			0x70 (PIN_OUTPUT | MUX_MODE6) /* gpio3_80 HUB_NRESET */

			0x6e (PIN_OUTPUT | MUX_MODE6) /* gpio3_79 ETH_NRESET */

		>;

	};



	led_gpio_pins: pinmux_led_gpio_pins {

		pinctrl-single,pins = <

			0x196 (PIN_OUTPUT | MUX_MODE6) /* uart3_cts_rctx.gpio5_153 */

		>;

	};



	uart1_pins: pinmux_uart1_pins {

		pinctrl-single,pins = <

			0x60 (PIN_OUTPUT | MUX_MODE0) /* uart1_tx.uart1_cts */

			0x62 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_tx.uart1_cts */

			0x64 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_rx.uart1_rts */

			0x66 (PIN_OUTPUT | MUX_MODE0) /* uart1_rx.uart1_rts */

		>;

	};



	uart3_pins: pinmux_uart3_pins {

		pinctrl-single,pins = <

			0x19a (PIN_OUTPUT | MUX_MODE0) /* uart3_rts_irsd.uart3_tx_irtx */

			0x19c (PIN_INPUT_PULLUP | MUX_MODE0) /* uart3_rx_irrx.uart3_usbb3_hsic */

		>;

	};



	uart5_pins: pinmux_uart5_pins {

		pinctrl-single,pins = <

			0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart5_rx.uart5_rx */

			0x172 (PIN_OUTPUT | MUX_MODE0) /* uart5_tx.uart5_tx */

			0x174 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart5_cts.uart5_rts */

			0x176 (PIN_OUTPUT | MUX_MODE0) /* uart5_cts.uart5_rts */

		>;

	};



	dss_hdmi_pins: pinmux_dss_hdmi_pins {

		pinctrl-single,pins = <

			0x0fc (PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_cec.hdmi_cec */

			0x100 (PIN_INPUT | MUX_MODE0)	/* hdmi_ddc_scl.hdmi_ddc_scl */

			0x102 (PIN_INPUT | MUX_MODE0)	/* hdmi_ddc_sda.hdmi_ddc_sda */

		>;

	};



	tpd12s015_pins: pinmux_tpd12s015_pins {

		pinctrl-single,pins = <

			0x0fe (PIN_INPUT_PULLDOWN | MUX_MODE6)	/* hdmi_hpd.gpio7_193 */

		>;

	};

};



&omap5_pmx_wkup {

	pinctrl-names = "default";

	pinctrl-0 = <

			&usbhost_wkup_pins

	>;



	usbhost_wkup_pins: pinmux_usbhost_wkup_pins {

		pinctrl-single,pins = <

			0x1A (PIN_OUTPUT | MUX_MODE0) /* fref_clk1_out, USB hub clk */

		>;

	};



	wlcore_irq_pin: pinmux_wlcore_irq_pin {

		pinctrl-single,pins = <

			OMAP5_IOPAD(0x040, WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE6)	/* llia_wakereqin.gpio1_wk14 */

		>;

	};

};



&mmc1 {

	vmmc-supply = <&ldo9_reg>;

	bus-width = <4>;

};



&mmc2 {

	vmmc-supply = <&vmmcsd_fixed>;

	bus-width = <8>;

	ti,non-removable;

};



&mmc3 {

	vmmc-supply = <&vmmcsdio_fixed>;

	mmc-pwrseq = <&mmc3_pwrseq>;

	bus-width = <4>;

	non-removable;

	cap-power-off-card;

	pinctrl-names = "default";

	pinctrl-0 = <&mmc3_pins &wlcore_irq_pin>;

	interrupts-extended = <&gic GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH

			       &omap5_pmx_core 0x168>;



	#address-cells = <1>;

	#size-cells = <0>;

	wlcore: wlcore@2 {

		compatible = "ti,wl1271";

		reg = <2>;

		interrupt-parent = <&gpio1>;

		interrupts = <14 IRQ_TYPE_LEVEL_HIGH>;	/* gpio 14 */

		ref-clock-frequency = <26000000>;

	};

};



&mmc4 {

	status = "disabled";

};



&mmc5 {

	status = "disabled";

};



&i2c1 {

	pinctrl-names = "default";

	pinctrl-0 = <&i2c1_pins>;



	clock-frequency = <400000>;



	palmas: palmas@48 {

		compatible = "ti,palmas";

		interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>; /* IRQ_SYS_1N */

		reg = <0x48>;

		interrupt-controller;

		#interrupt-cells = <2>;

		ti,system-power-controller;



		extcon_usb3: palmas_usb {

			compatible = "ti,palmas-usb-vid";

			ti,enable-vbus-detection;

			ti,enable-id-detection;

			ti,wakeup;

		};



		clk32kgaudio: palmas_clk32k@1 {

			compatible = "ti,palmas-clk32kgaudio";

			#clock-cells = <0>;

		};



		palmas_pmic {

			compatible = "ti,palmas-pmic";

			interrupt-parent = <&palmas>;

			interrupts = <14 IRQ_TYPE_NONE>;

			interrupt-name = "short-irq";



			ti,ldo6-vibrator;



			regulators {

				smps123_reg: smps123 {

					/* VDD_OPP_MPU */

					regulator-name = "smps123";

					regulator-min-microvolt = < 600000>;

					regulator-max-microvolt = <1500000>;

					regulator-always-on;

					regulator-boot-on;

				};



				smps45_reg: smps45 {

					/* VDD_OPP_MM */

					regulator-name = "smps45";

					regulator-min-microvolt = < 600000>;

					regulator-max-microvolt = <1310000>;

					regulator-always-on;

					regulator-boot-on;

				};



				smps6_reg: smps6 {

					/* VDD_DDR3 - over VDD_SMPS6 */

					regulator-name = "smps6";

					regulator-min-microvolt = <1200000>;

					regulator-max-microvolt = <1200000>;

					regulator-always-on;

					regulator-boot-on;

				};



				smps7_reg: smps7 {

					/* VDDS_1v8_OMAP over VDDS_1v8_MAIN */

					regulator-name = "smps7";

					regulator-min-microvolt = <1800000>;

					regulator-max-microvolt = <1800000>;

					regulator-always-on;

					regulator-boot-on;

				};



				smps8_reg: smps8 {

					/* VDD_OPP_CORE */

					regulator-name = "smps8";

					regulator-min-microvolt = < 600000>;

					regulator-max-microvolt = <1310000>;

					regulator-always-on;

					regulator-boot-on;

				};



				smps9_reg: smps9 {

					/* VDDA_2v1_AUD over VDD_2v1 */

					regulator-name = "smps9";

					regulator-min-microvolt = <2100000>;

					regulator-max-microvolt = <2100000>;

					ti,smps-range = <0x80>;

				};



				smps10_out2_reg: smps10_out2 {

					/* VBUS_5V_OTG */

					regulator-name = "smps10_out2";

					regulator-min-microvolt = <5000000>;

					regulator-max-microvolt = <5000000>;

					regulator-always-on;

					regulator-boot-on;

				};



				smps10_out1_reg: smps10_out1 {

					/* VBUS_5V_OTG */

					regulator-name = "smps10_out1";

					regulator-min-microvolt = <5000000>;

					regulator-max-microvolt = <5000000>;

				};



				ldo1_reg: ldo1 {

					/* VDDAPHY_CAM: vdda_csiport */

					regulator-name = "ldo1";

					regulator-min-microvolt = <1500000>;

					regulator-max-microvolt = <1800000>;

				};



				ldo2_reg: ldo2 {

					/* VCC_2V8_DISP: Does not go anywhere */

					regulator-name = "ldo2";

					regulator-min-microvolt = <2800000>;

					regulator-max-microvolt = <2800000>;

					/* Unused */

					status = "disabled";

				};



				ldo3_reg: ldo3 {

					/* VDDAPHY_MDM: vdda_lli */

					regulator-name = "ldo3";

					regulator-min-microvolt = <1500000>;

					regulator-max-microvolt = <1500000>;

					regulator-boot-on;

					/* Only if Modem is used */

					status = "disabled";

				};



				ldo4_reg: ldo4 {

					/* VDDAPHY_DISP: vdda_dsiport/hdmi */

					regulator-name = "ldo4";

					regulator-min-microvolt = <1500000>;

					regulator-max-microvolt = <1800000>;

				};



				ldo5_reg: ldo5 {

					/* VDDA_1V8_PHY: usb/sata/hdmi.. */

					regulator-name = "ldo5";

					regulator-min-microvolt = <1800000>;

					regulator-max-microvolt = <1800000>;

					regulator-always-on;

					regulator-boot-on;

				};



				ldo6_reg: ldo6 {

					/* VDDS_1V2_WKUP: hsic/ldo_emu_wkup */

					regulator-name = "ldo6";

					regulator-min-microvolt = <1200000>;

					regulator-max-microvolt = <1200000>;

					regulator-always-on;

					regulator-boot-on;

				};



				ldo7_reg: ldo7 {

					/* VDD_VPP: vpp1 */

					regulator-name = "ldo7";

					regulator-min-microvolt = <2000000>;

					regulator-max-microvolt = <2000000>;

					/* Only for efuse reprograming! */

					status = "disabled";

				};



				ldo8_reg: ldo8 {

					/* VDD_3v0: Does not go anywhere */

					regulator-name = "ldo8";

					regulator-min-microvolt = <3000000>;

					regulator-max-microvolt = <3000000>;

					regulator-boot-on;

					/* Unused */

					status = "disabled";

				};



				ldo9_reg: ldo9 {

					/* VCC_DV_SDIO: vdds_sdcard */

					regulator-name = "ldo9";

					regulator-min-microvolt = <1800000>;

					regulator-max-microvolt = <3000000>;

					regulator-boot-on;

				};



				ldoln_reg: ldoln {

					/* VDDA_1v8_REF: vdds_osc/mm_l4per.. */

					regulator-name = "ldoln";

					regulator-min-microvolt = <1800000>;

					regulator-max-microvolt = <1800000>;

					regulator-always-on;

					regulator-boot-on;

				};



				ldousb_reg: ldousb {

					/* VDDA_3V_USB: VDDA_USBHS33 */

					regulator-name = "ldousb";

					regulator-min-microvolt = <3250000>;

					regulator-max-microvolt = <3250000>;

					regulator-always-on;

					regulator-boot-on;

				};



				regen3_reg: regen3 {

					/* REGEN3 controls LDO9 supply to card */

					regulator-name = "regen3";

					regulator-always-on;

					regulator-boot-on;

				};

			};

		};



		palmas_power_button: palmas_power_button {

			compatible = "ti,palmas-pwrbutton";

			interrupt-parent = <&palmas>;

			interrupts = <1 IRQ_TYPE_EDGE_FALLING>;

			wakeup-source;

		};

	};



	twl6040: twl@4b {

		compatible = "ti,twl6040";

		reg = <0x4b>;



		pinctrl-names = "default";

		pinctrl-0 = <&twl6040_pins>;



		interrupts = <GIC_SPI 119 IRQ_TYPE_NONE>; /* IRQ_SYS_2N cascaded to gic */

		ti,audpwron-gpio = <&gpio5 13 GPIO_ACTIVE_HIGH>;  /* gpio line 141 */



		vio-supply = <&smps7_reg>;

		v2v1-supply = <&smps9_reg>;

		enable-active-high;



		clocks = <&clk32kgaudio>;

		clock-names = "clk32k";

	};

};



&mcpdm {

	pinctrl-names = "default";

	pinctrl-0 = <&mcpdm_pins>;

	status = "okay";

};



&mcbsp1 {

	pinctrl-names = "default";

	pinctrl-0 = <&mcbsp1_pins>;

	status = "okay";

};



&mcbsp2 {

	pinctrl-names = "default";

	pinctrl-0 = <&mcbsp2_pins>;

	status = "okay";

};



&usbhshost {

	port2-mode = "ehci-hsic";

	port3-mode = "ehci-hsic";

};



&usbhsehci {

	phys = <0 &hsusb2_phy &hsusb3_phy>;

};



&usb3 {

	extcon = <&extcon_usb3>;

	vbus-supply = <&smps10_out1_reg>;

};



&mcspi1 {



};



&mcspi2 {

	pinctrl-names = "default";

	pinctrl-0 = <&mcspi2_pins>;

};



&mcspi3 {

	pinctrl-names = "default";

	pinctrl-0 = <&mcspi3_pins>;

};



&uart1 {

	pinctrl-names = "default";

	pinctrl-0 = <&uart1_pins>;

};



&uart3 {

	pinctrl-names = "default";

	pinctrl-0 = <&uart3_pins>;

	interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,

			      <&omap5_pmx_core 0x19c>;

};



&uart5 {

	pinctrl-names = "default";

	pinctrl-0 = <&uart5_pins>;

};



&cpu0 {

	cpu0-supply = <&smps123_reg>;

};



&dss {

	status = "ok";

};



&hdmi {

	status = "ok";



	/* vdda-supply populated in board specific dts file */



	pinctrl-names = "default";

	pinctrl-0 = <&dss_hdmi_pins>;



	port {

		hdmi_out: endpoint {

			remote-endpoint = <&tpd12s015_in>;

		};

	};

};

arch/arm/boot/dts/omap5-uevm.dts

+14 −648

File changed.

Preview size limit exceeded, changes collapsed.

CRA Git | Maintained and supported by SUSTech CRA and CCSE