Commit ee3cb629 authored by Ajit Khaparde's avatar Ajit Khaparde Committed by David S. Miller
Browse files

be2net: changes to properly provide phy details 



be2net driver is currently not showing correct phy details in certain cases.
This patch fixes it.

Signed-off-by: default avatarAjit Khaparde <ajitk@serverengines.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 3d8009c7

drivers/net/benet/be.h

+1 −0
Original line number Diff line number Diff line
@@ -282,6 +282,7 @@ struct be_adapter { 
	int link_speed;

	u8 port_type;

	u8 transceiver;

	u8 autoneg;

	u8 generation;		/* BladeEngine ASIC generation */

	u32 flash_status;

	struct completion flash_compl;

drivers/net/benet/be_cmds.c

+35 −0
Original line number Diff line number Diff line
@@ -1695,3 +1695,38 @@ int be_cmd_get_seeprom_data(struct be_adapter *adapter, 
	spin_unlock_bh(&adapter->mcc_lock);

	return status;

}



int be_cmd_get_phy_info(struct be_adapter *adapter, struct be_dma_mem *cmd)

{

	struct be_mcc_wrb *wrb;

	struct be_cmd_req_get_phy_info *req;

	struct be_sge *sge;

	int status;



	spin_lock_bh(&adapter->mcc_lock);



	wrb = wrb_from_mccq(adapter);

	if (!wrb) {

		status = -EBUSY;

		goto err;

	}



	req = cmd->va;

	sge = nonembedded_sgl(wrb);



	be_wrb_hdr_prepare(wrb, sizeof(*req), false, 1,

				OPCODE_COMMON_GET_PHY_DETAILS);



	be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,

			OPCODE_COMMON_GET_PHY_DETAILS,

			sizeof(*req));



	sge->pa_hi = cpu_to_le32(upper_32_bits(cmd->dma));

	sge->pa_lo = cpu_to_le32(cmd->dma & 0xFFFFFFFF);

	sge->len = cpu_to_le32(cmd->size);



	status = be_mcc_notify_wait(adapter);

err:

	spin_unlock_bh(&adapter->mcc_lock);

	return status;

}

drivers/net/benet/be_cmds.h

+27 −0
Original line number Diff line number Diff line
@@ -144,6 +144,7 @@ struct be_mcc_mailbox { 
#define OPCODE_COMMON_ENABLE_DISABLE_BEACON		69

#define OPCODE_COMMON_GET_BEACON_STATE			70

#define OPCODE_COMMON_READ_TRANSRECV_DATA		73

#define OPCODE_COMMON_GET_PHY_DETAILS			102



#define OPCODE_ETH_ACPI_CONFIG				2

#define OPCODE_ETH_PROMISCUOUS				3
@@ -869,6 +870,30 @@ struct be_cmd_resp_seeprom_read { 
	u8 seeprom_data[BE_READ_SEEPROM_LEN];

};



enum {

	PHY_TYPE_CX4_10GB = 0,

	PHY_TYPE_XFP_10GB,

	PHY_TYPE_SFP_1GB,

	PHY_TYPE_SFP_PLUS_10GB,

	PHY_TYPE_KR_10GB,

	PHY_TYPE_KX4_10GB,

	PHY_TYPE_BASET_10GB,

	PHY_TYPE_BASET_1GB,

	PHY_TYPE_DISABLED = 255

};



struct be_cmd_req_get_phy_info {

	struct be_cmd_req_hdr hdr;

	u8 rsvd0[24];

};

struct be_cmd_resp_get_phy_info {

	struct be_cmd_req_hdr hdr;

	u16 phy_type;

	u16 interface_type;

	u32 misc_params;

	u32 future_use[4];

};



extern int be_pci_fnum_get(struct be_adapter *adapter);

extern int be_cmd_POST(struct be_adapter *adapter);

extern int be_cmd_mac_addr_query(struct be_adapter *adapter, u8 *mac_addr,
@@ -947,4 +972,6 @@ extern int be_cmd_get_seeprom_data(struct be_adapter *adapter, 
				struct be_dma_mem *nonemb_cmd);

extern int be_cmd_set_loopback(struct be_adapter *adapter, u8 port_num,

				u8 loopback_type, u8 enable);

extern int be_cmd_get_phy_info(struct be_adapter *adapter,

		struct be_dma_mem *cmd);

drivers/net/benet/be_ethtool.c

+41 −14
Original line number Diff line number Diff line
@@ -314,10 +314,13 @@ static int be_get_sset_count(struct net_device *netdev, int stringset) 
static int be_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)

{

	struct be_adapter *adapter = netdev_priv(netdev);

	u8 mac_speed = 0, connector = 0;

	struct be_dma_mem phy_cmd;

	struct be_cmd_resp_get_phy_info *resp;

	u8 mac_speed = 0;

	u16 link_speed = 0;

	bool link_up = false;

	int status;

	u16 intf_type;



	if (adapter->link_speed < 0) {

		status = be_cmd_link_status_query(adapter, &link_up,
@@ -337,40 +340,57 @@ static int be_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd) 
			}

		}



		status = be_cmd_read_port_type(adapter, adapter->port_num,

						&connector);

		phy_cmd.size = sizeof(struct be_cmd_req_get_phy_info);

		phy_cmd.va = pci_alloc_consistent(adapter->pdev, phy_cmd.size,

					&phy_cmd.dma);

		if (!phy_cmd.va) {

			dev_err(&adapter->pdev->dev, "Memory alloc failure\n");

			return -ENOMEM;

		}

		status = be_cmd_get_phy_info(adapter, &phy_cmd);

		if (!status) {

			switch (connector) {

			case 7:

			resp = (struct be_cmd_resp_get_phy_info *) phy_cmd.va;

			intf_type = le16_to_cpu(resp->interface_type);



			switch (intf_type) {

			case PHY_TYPE_XFP_10GB:

			case PHY_TYPE_SFP_1GB:

			case PHY_TYPE_SFP_PLUS_10GB:

				ecmd->port = PORT_FIBRE;

				ecmd->transceiver = XCVR_EXTERNAL;

				break;

			case 0:

				ecmd->port = PORT_TP;

				ecmd->transceiver = XCVR_EXTERNAL;

				break;

			default:

				ecmd->port = PORT_TP;

				ecmd->transceiver = XCVR_INTERNAL;

				break;

			}

		} else {

			ecmd->port = PORT_AUI;



			switch (intf_type) {

			case PHY_TYPE_KR_10GB:

			case PHY_TYPE_KX4_10GB:

				ecmd->autoneg = AUTONEG_ENABLE;

			ecmd->transceiver = XCVR_INTERNAL;

				break;

			default:

				ecmd->autoneg = AUTONEG_DISABLE;

				ecmd->transceiver = XCVR_EXTERNAL;

				break;

			}

		}



		/* Save for future use */

		adapter->link_speed = ecmd->speed;

		adapter->port_type = ecmd->port;

		adapter->transceiver = ecmd->transceiver;

		adapter->autoneg = ecmd->autoneg;

		pci_free_consistent(adapter->pdev, phy_cmd.size,

					phy_cmd.va, phy_cmd.dma);

	} else {

		ecmd->speed = adapter->link_speed;

		ecmd->port = adapter->port_type;

		ecmd->transceiver = adapter->transceiver;

		ecmd->autoneg = adapter->autoneg;

	}



	ecmd->duplex = DUPLEX_FULL;

	ecmd->autoneg = AUTONEG_DISABLE;

	ecmd->phy_address = adapter->port_num;

	switch (ecmd->port) {

	case PORT_FIBRE:
@@ -384,6 +404,13 @@ static int be_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd) 
		break;

	}



	if (ecmd->autoneg) {

		ecmd->supported |= SUPPORTED_1000baseT_Full;

		ecmd->supported |= SUPPORTED_Autoneg;

		ecmd->advertising |= (ADVERTISED_10000baseT_Full |

				ADVERTISED_1000baseT_Full);

	}



	return 0;

}

CRA Git | Maintained and supported by SUSTech CRA and CCSE