Commit ee0a90fa authored by brking@us.ibm.com's avatar brking@us.ibm.com Committed by James Bottomley
Browse files

[SCSI] ipr: Support new device queueing model 



New ipr adapters support a new device queueing model in the
adapter firmware. The queueing model is the NACA queueing model,
but it does not mean use of NACA is required. The new model removes
some of the adapter firmware queue state that made handling QERR=0
almost impossible. The queueing model on older adapters included the
concept of a queue frozen state, which would freeze the response
queue in the adapter when a check condition occurred, requiring a
a primitive to resume the queue. The new queueing model removes this
complexity.

Signed-off-by: default avatarBrian King <brking@us.ibm.com>
Signed-off-by: default avatarJames Bottomley <James.Bottomley@SteelEye.com>
parent ee0f05b8

drivers/scsi/ipr.c

+48 −11
Original line number Diff line number Diff line
@@ -814,7 +814,7 @@ static void ipr_send_hcam(struct ipr_ioa_cfg *ioa_cfg, u8 type, 
 **/

static void ipr_init_res_entry(struct ipr_resource_entry *res)

{

	res->needs_sync_complete = 1;

	res->needs_sync_complete = 0;

	res->in_erp = 0;

	res->add_to_ml = 0;

	res->del_from_ml = 0;
@@ -3251,6 +3251,7 @@ static int ipr_slave_alloc(struct scsi_device *sdev) 
			res->add_to_ml = 0;

			res->in_erp = 0;

			sdev->hostdata = res;

			if (!ipr_is_naca_model(res))

				res->needs_sync_complete = 1;

			rc = 0;

			break;
@@ -3515,6 +3516,7 @@ static int ipr_cancel_op(struct scsi_cmnd * scsi_cmd) 
	}



	list_add_tail(&ipr_cmd->queue, &ioa_cfg->free_q);

	if (!ipr_is_naca_model(res))

		res->needs_sync_complete = 1;



	LEAVE;
@@ -3819,6 +3821,7 @@ static void ipr_erp_done(struct ipr_cmnd *ipr_cmd) 
	}



	if (res) {

		if (!ipr_is_naca_model(res))

			res->needs_sync_complete = 1;

		res->in_erp = 0;

	}
@@ -4088,6 +4091,30 @@ static void ipr_gen_sense(struct ipr_cmnd *ipr_cmd) 
	}

}



/**

 * ipr_get_autosense - Copy autosense data to sense buffer

 * @ipr_cmd:	ipr command struct

 *

 * This function copies the autosense buffer to the buffer

 * in the scsi_cmd, if there is autosense available.

 *

 * Return value:

 *	1 if autosense was available / 0 if not

 **/

static int ipr_get_autosense(struct ipr_cmnd *ipr_cmd)

{

	struct ipr_ioasa *ioasa = &ipr_cmd->ioasa;



	if ((be32_to_cpu(ioasa->ioasc_specific) &

	     (IPR_ADDITIONAL_STATUS_FMT | IPR_AUTOSENSE_VALID)) == 0)

		return 0;



	memcpy(ipr_cmd->scsi_cmd->sense_buffer, ioasa->auto_sense.data,

	       min_t(u16, be16_to_cpu(ioasa->auto_sense.auto_sense_len),

		   SCSI_SENSE_BUFFERSIZE));

	return 1;

}



/**

 * ipr_erp_start - Process an error response for a SCSI op

 * @ioa_cfg:	ioa config struct
@@ -4118,6 +4145,9 @@ static void ipr_erp_start(struct ipr_ioa_cfg *ioa_cfg, 


	switch (ioasc & IPR_IOASC_IOASC_MASK) {

	case IPR_IOASC_ABORTED_CMD_TERM_BY_HOST:

		if (ipr_is_naca_model(res))

			scsi_cmd->result |= (DID_ABORT << 16);

		else

			scsi_cmd->result |= (DID_IMM_RETRY << 16);

		break;

	case IPR_IOASC_IR_RESOURCE_HANDLE:
@@ -4126,6 +4156,7 @@ static void ipr_erp_start(struct ipr_ioa_cfg *ioa_cfg, 
		break;

	case IPR_IOASC_HW_SEL_TIMEOUT:

		scsi_cmd->result |= (DID_NO_CONNECT << 16);

		if (!ipr_is_naca_model(res))

			res->needs_sync_complete = 1;

		break;

	case IPR_IOASC_SYNC_REQUIRED:
@@ -4146,21 +4177,27 @@ static void ipr_erp_start(struct ipr_ioa_cfg *ioa_cfg, 
		if (!res->resetting_device)

			scsi_report_bus_reset(ioa_cfg->host, scsi_cmd->device->channel);

		scsi_cmd->result |= (DID_ERROR << 16);

		if (!ipr_is_naca_model(res))

			res->needs_sync_complete = 1;

		break;

	case IPR_IOASC_HW_DEV_BUS_STATUS:

		scsi_cmd->result |= IPR_IOASC_SENSE_STATUS(ioasc);

		if (IPR_IOASC_SENSE_STATUS(ioasc) == SAM_STAT_CHECK_CONDITION) {

			if (!ipr_get_autosense(ipr_cmd)) {

				if (!ipr_is_naca_model(res)) {

					ipr_erp_cancel_all(ipr_cmd);

					return;

				}

			}

		}

		if (!ipr_is_naca_model(res))

			res->needs_sync_complete = 1;

		break;

	case IPR_IOASC_NR_INIT_CMD_REQUIRED:

		break;

	default:

		scsi_cmd->result |= (DID_ERROR << 16);

		if (!ipr_is_vset_device(res))

		if (!ipr_is_vset_device(res) && !ipr_is_naca_model(res))

			res->needs_sync_complete = 1;

		break;

	}

drivers/scsi/ipr.h

+18 −0
Original line number Diff line number Diff line
@@ -302,6 +302,10 @@ struct ipr_config_table_entry { 
#define IPR_SUBTYPE_GENERIC_SCSI	1

#define IPR_SUBTYPE_VOLUME_SET		2



#define IPR_QUEUEING_MODEL(res)	((((res)->cfgte.flags) & 0x70) >> 4)

#define IPR_QUEUE_FROZEN_MODEL	0

#define IPR_QUEUE_NACA_MODEL		1



	struct ipr_res_addr res_addr;

	__be32 res_handle;

	__be32 reserved4[2];
@@ -1293,6 +1297,20 @@ static inline int ipr_is_gscsi(struct ipr_resource_entry *res) 
		return 0;

}



/**

 * ipr_is_naca_model - Determine if a resource is using NACA queueing model

 * @res:	resource entry struct

 *

 * Return value:

 * 	1 if NACA queueing model / 0 if not NACA queueing model

 **/

static inline int ipr_is_naca_model(struct ipr_resource_entry *res)

{

	if (ipr_is_gscsi(res) && IPR_QUEUEING_MODEL(res) == IPR_QUEUE_NACA_MODEL)

		return 1;

	return 0;

}



/**

 * ipr_is_device - Determine if resource address is that of a device

 * @res_addr:	resource address struct

CRA Git | Maintained and supported by SUSTech CRA and CCSE