ARM: dts: s5pv210: Add panel support to Aries boards (ecd7a473) · Commits · 戴 / test

arch/arm/boot/dts/s5pv210-aries.dtsi

+52 −16

Original line number	Diff line number	Diff line
		@@ -200,8 +200,6 @@
		regulator-name = "VLCD_1.8V";
		regulator-min-microvolt = <1800000>;
		regulator-max-microvolt = <1800000>;
		/* Till we get panel driver */
		regulator-always-on;

		regulator-state-mem {
		regulator-off-in-suspend;
		@@ -300,8 +298,6 @@
		regulator-name = "VCC_3.0V_LCD";
		regulator-min-microvolt = <3000000>;
		regulator-max-microvolt = <3000000>;
		/* Till we get panel driver */
		regulator-always-on;

		regulator-state-mem {
		regulator-off-in-suspend;
		@@ -454,6 +450,39 @@
		offset = <0x681c>; /* PS_HOLD_CONTROL */
		value = <0x5200>;
		};

		spi_lcd: spi-gpio-0 {
		compatible = "spi-gpio";
		#address-cells = <1>;
		#size-cells = <0>;

		sck-gpios = <&mp04 1 GPIO_ACTIVE_HIGH>;
		mosi-gpios = <&mp04 3 GPIO_ACTIVE_HIGH>;
		cs-gpios = <&mp01 1 GPIO_ACTIVE_HIGH>;
		num-chipselects = <1>;

		pinctrl-names = "default";
		pinctrl-0 = <&lcd_spi_pins>;

		panel@0 {
		compatible = "samsung,s6e63m0";
		reg = <0>;
		reset-gpios = <&mp05 5 GPIO_ACTIVE_LOW>;
		vdd3-supply = <&ldo7_reg>;
		vci-supply = <&ldo17_reg>;
		spi-cs-high;
		spi-max-frequency = <1200000>;

		pinctrl-names = "default";
		pinctrl-0 = <&panel_rst>;

		port {
		lcd_ep: endpoint {
		remote-endpoint = <&fimd_ep>;
		};
		};
		};
		};
		};

		&fimd {
		@@ -464,18 +493,13 @@
		samsung,invert-vden;
		samsung,invert-vclk;

		display-timings {
		timing-0 {
		/* 480x800@60Hz */
		clock-frequency = <25628040>;
		hactive = <480>;
		vactive = <800>;
		hfront-porch = <16>;
		hback-porch = <16>;
		hsync-len = <2>;
		vfront-porch = <28>;
		vback-porch = <1>;
		vsync-len = <2>;
		#address-cells = <1>;
		#size-cells = <0>;

		port@3 {
		reg = <3>;
		fimd_ep: endpoint {
		remote-endpoint = <&lcd_ep>;
		};
		};
		};
		@@ -600,6 +624,12 @@
		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
		};

		lcd_spi_pins: spi-lcd-pins {
		samsung,pins = "mp01-1", "mp04-1", "mp04-3";
		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
		};

		fg_i2c_pins: fg-i2c-pins {
		samsung,pins = "mp05-0", "mp05-1";
		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
		@@ -611,6 +641,12 @@
		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
		};

		panel_rst: panel-rst {
		samsung,pins = "mp05-5";
		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
		};
		};

		&pwm {

Admin message