Commit ec21e2ec authored by Jeff Kirsher's avatar Jeff Kirsher
Browse files

freescale: Move the Freescale drivers 



Move the Freescale drivers into drivers/net/ethernet/freescale/ and
make the necessary Kconfig and Makefile changes.

CC: Sandeep Gopalpet <sandeep.kumar@freescale.com>
CC: Andy Fleming <afleming@freescale.com>
CC: Shlomi Gridish <gridish@freescale.com>
CC: Li Yang <leoli@freescale.com>
CC: Pantelis Antoniou <pantelis.antoniou@gmail.com>
CC: Vitaly Bordug <vbordug@ru.mvista.com>
CC: Dan Malek <dmalek@jlc.net>
CC: Sylvain Munaut <tnt@246tNt.com>
Signed-off-by: default avatarJeff Kirsher <jeffrey.t.kirsher@intel.com>
parent 5346ebf6

MAINTAINERS

+2 −2
Original line number Diff line number Diff line
@@ -2689,7 +2689,7 @@ M: Vitaly Bordug <vbordug@ru.mvista.com> 
L:	linuxppc-dev@lists.ozlabs.org

L:	netdev@vger.kernel.org

S:	Maintained

F:	drivers/net/fs_enet/

F:	drivers/net/ethernet/freescale/fs_enet/

F:	include/linux/fs_enet_pd.h



FREESCALE QUICC ENGINE LIBRARY
@@ -2711,7 +2711,7 @@ M: Li Yang <leoli@freescale.com> 
L:	netdev@vger.kernel.org

L:	linuxppc-dev@lists.ozlabs.org

S:	Maintained

F:	drivers/net/ucc_geth*

F:	drivers/net/ethernet/freescale/ucc_geth*



FREESCALE QUICC ENGINE UCC UART DRIVER

M:	Timur Tabi <timur@freescale.com>

drivers/net/Kconfig

+0 −66
Original line number Diff line number Diff line
@@ -605,39 +605,6 @@ config NET_POCKET 
	  the questions about this class of network devices. If you say Y, you

	  will be asked for your specific device in the following questions.



config FEC

	bool "FEC ethernet controller (of ColdFire and some i.MX CPUs)"

	depends on M523x || M527x || M5272 || M528x || M520x || M532x || \

		IMX_HAVE_PLATFORM_FEC || MXS_HAVE_PLATFORM_FEC

	default IMX_HAVE_PLATFORM_FEC || MXS_HAVE_PLATFORM_FEC if ARM

	select PHYLIB

	help

	  Say Y here if you want to use the built-in 10/100 Fast ethernet

	  controller on some Motorola ColdFire and Freescale i.MX processors.



config FEC_MPC52xx

	tristate "MPC52xx FEC driver"

	depends on PPC_MPC52xx && PPC_BESTCOMM

	select CRC32

	select PHYLIB

	select PPC_BESTCOMM_FEC

	---help---

	  This option enables support for the MPC5200's on-chip

	  Fast Ethernet Controller

	  If compiled as module, it will be called fec_mpc52xx.



config FEC_MPC52xx_MDIO

	bool "MPC52xx FEC MDIO bus driver"

	depends on FEC_MPC52xx

	default y

	---help---

	  The MPC5200's FEC can connect to the Ethernet either with

	  an external MII PHY chip or 10 Mbps 7-wire interface

	  (Motorola? industry standard).

	  If your board uses an external PHY connected to FEC, enable this.

	  If not sure, enable.

	  If compiled as module, it will be called fec_mpc52xx_phy.



config XILINX_EMACLITE

	tristate "Xilinx 10/100 Ethernet Lite support"

	depends on PPC32 || MICROBLAZE
@@ -651,9 +618,6 @@ config LANTIQ_ETOP 
	help

	  Support for the MII0 inside the Lantiq SoC





source "drivers/net/fs_enet/Kconfig"



source "drivers/net/octeon/Kconfig"



endif # NET_ETHERNET
@@ -769,36 +733,6 @@ config GELIC_WIRELESS 
	  the driver automatically distinguishes the models, you can

	  safely enable this option even if you have a wireless-less model.



config FSL_PQ_MDIO

	tristate "Freescale PQ MDIO"

	depends on FSL_SOC

	select PHYLIB

	help

	  This driver supports the MDIO bus used by the gianfar and UCC drivers.



config GIANFAR

	tristate "Gianfar Ethernet"

	depends on FSL_SOC

	select FSL_PQ_MDIO

	select PHYLIB

	select CRC32

	help

	  This driver supports the Gigabit TSEC on the MPC83xx, MPC85xx,

	  and MPC86xx family of chips, and the FEC on the 8540.



config UCC_GETH

	tristate "Freescale QE Gigabit Ethernet"

	depends on QUICC_ENGINE

	select FSL_PQ_MDIO

	select PHYLIB

	help

	  This driver supports the Gigabit Ethernet mode of the QUICC Engine,

	  which is available on some Freescale SOCs.



config UGETH_TX_ON_DEMAND

	bool "Transmit on Demand support"

	depends on UCC_GETH



config XILINX_LL_TEMAC

	tristate "Xilinx LL TEMAC (LocalLink Tri-mode Ethernet MAC) driver"

	depends on PPC || MICROBLAZE

drivers/net/Makefile

+0 −18
Original line number Diff line number Diff line
@@ -13,20 +13,9 @@ obj-$(CONFIG_TI_DAVINCI_CPDMA) += davinci_cpdma.o 
obj-$(CONFIG_IP1000) += ipg.o

obj-$(CONFIG_CAN) += can/

obj-$(CONFIG_BONDING) += bonding/

obj-$(CONFIG_GIANFAR) += gianfar_driver.o

obj-$(CONFIG_PTP_1588_CLOCK_GIANFAR) += gianfar_ptp.o

obj-$(CONFIG_JME) += jme.o

obj-$(CONFIG_VMXNET3) += vmxnet3/



gianfar_driver-objs := gianfar.o \

		gianfar_ethtool.o \

		gianfar_sysfs.o



obj-$(CONFIG_UCC_GETH) += ucc_geth_driver.o

ucc_geth_driver-objs := ucc_geth.o ucc_geth_ethtool.o



obj-$(CONFIG_FSL_PQ_MDIO) += fsl_pq_mdio.o



#

# link order important here

#
@@ -63,11 +52,6 @@ obj-$(CONFIG_HAMACHI) += hamachi.o 
obj-$(CONFIG_NET) += Space.o loopback.o

obj-$(CONFIG_NET_SB1000) += sb1000.o

obj-$(CONFIG_HP100) += hp100.o

obj-$(CONFIG_FEC) += fec.o

obj-$(CONFIG_FEC_MPC52xx) += fec_mpc52xx.o

ifeq ($(CONFIG_FEC_MPC52xx_MDIO),y)

	obj-$(CONFIG_FEC_MPC52xx) += fec_mpc52xx_phy.o

endif

obj-$(CONFIG_FORCEDETH) += forcedeth.o



obj-$(CONFIG_TSI108_ETH) += tsi108_eth.o
@@ -139,8 +123,6 @@ obj-$(CONFIG_ETRAX_ETHERNET) += cris/ 


obj-$(CONFIG_NETCONSOLE) += netconsole.o



obj-$(CONFIG_FS_ENET) += fs_enet/



obj-$(CONFIG_VIRTIO_NET) += virtio_net.o



obj-$(CONFIG_WIMAX) += wimax/

drivers/net/ethernet/Kconfig

+1 −0
Original line number Diff line number Diff line
@@ -24,6 +24,7 @@ source "drivers/net/ethernet/dlink/Kconfig" 
source "drivers/net/ethernet/emulex/Kconfig"

source "drivers/net/ethernet/neterion/Kconfig"

source "drivers/net/ethernet/faraday/Kconfig"

source "drivers/net/ethernet/freescale/Kconfig"

source "drivers/net/ethernet/fujitsu/Kconfig"

source "drivers/net/ethernet/ibm/Kconfig"

source "drivers/net/ethernet/intel/Kconfig"

drivers/net/ethernet/Makefile

+1 −0
Original line number Diff line number Diff line
@@ -16,6 +16,7 @@ obj-$(CONFIG_NET_VENDOR_DLINK) += dlink/ 
obj-$(CONFIG_NET_VENDOR_EMULEX) += emulex/

obj-$(CONFIG_NET_VENDOR_EXAR) += neterion/

obj-$(CONFIG_NET_VENDOR_FARADAY) += faraday/

obj-$(CONFIG_NET_VENDOR_FREESCALE) += freescale/

obj-$(CONFIG_NET_VENDOR_FUJITSU) += fujitsu/

obj-$(CONFIG_NET_VENDOR_IBM) += ibm/

obj-$(CONFIG_NET_VENDOR_INTEL) += intel/

CRA Git | Maintained and supported by SUSTech CRA and CCSE