hwmon: (it87) Add support for IT8732F (ead80803) · Commits · 戴 / test

Documentation/hwmon/it87

+22 −13

Original line number	Diff line number	Diff line
		@@ -38,6 +38,10 @@ Supported chips:
		Prefix: 'it8728'
		Addresses scanned: from Super I/O config space (8 I/O ports)
		Datasheet: Not publicly available
		* IT8732F
		Prefix: 'it8732'
		Addresses scanned: from Super I/O config space (8 I/O ports)
		Datasheet: Not publicly available
		* IT8771E
		Prefix: 'it8771'
		Addresses scanned: from Super I/O config space (8 I/O ports)
		@@ -111,9 +115,9 @@ Description
		-----------

		This driver implements support for the IT8603E, IT8620E, IT8623E, IT8705F,
		IT8712F, IT8716F, IT8718F, IT8720F, IT8721F, IT8726F, IT8728F, IT8758E,
		IT8771E, IT8772E, IT8781F, IT8782F, IT8783E/F, IT8786E, IT8790E, and SiS950
		chips.
		IT8712F, IT8716F, IT8718F, IT8720F, IT8721F, IT8726F, IT8728F, IT8732F,
		IT8758E, IT8771E, IT8772E, IT8781F, IT8782F, IT8783E/F, IT8786E, IT8790E, and
		SiS950 chips.

		These chips are 'Super I/O chips', supporting floppy disks, infrared ports,
		joysticks and other miscellaneous stuff. For hardware monitoring, they
		@@ -137,10 +141,10 @@ The IT8716F, IT8718F, IT8720F, IT8721F/IT8758E and later IT8712F revisions
		have support for 2 additional fans. The additional fans are supported by the
		driver.

		The IT8716F, IT8718F, IT8720F, IT8721F/IT8758E, IT8781F, IT8782F, IT8783E/F,
		and late IT8712F and IT8705F also have optional 16-bit tachometer counters
		for fans 1 to 3. This is better (no more fan clock divider mess) but not
		compatible with the older chips and revisions. The 16-bit tachometer mode
		The IT8716F, IT8718F, IT8720F, IT8721F/IT8758E, IT8732F, IT8781F, IT8782F,
		IT8783E/F, and late IT8712F and IT8705F also have optional 16-bit tachometer
		counters for fans 1 to 3. This is better (no more fan clock divider mess) but
		not compatible with the older chips and revisions. The 16-bit tachometer mode
		is enabled by the driver when one of the above chips is detected.

		The IT8726F is just bit enhanced IT8716F with additional hardware
		@@ -159,6 +163,9 @@ IT8728F. It only supports 16-bit fan mode.

		The IT8790E supports up to 3 fans. 16-bit fan mode is always enabled.

		The IT8732F supports a closed-loop mode for fan control, but this is not
		currently implemented by the driver.

		Temperatures are measured in degrees Celsius. An alarm is triggered once
		when the Overtemperature Shutdown limit is crossed.

		@@ -173,12 +180,14 @@ is done.
		Voltage sensors (also known as IN sensors) report their values in volts. An
		alarm is triggered if the voltage has crossed a programmable minimum or
		maximum limit. Note that minimum in this case always means 'closest to
		zero'; this is important for negative voltage measurements. All voltage
		inputs can measure voltages between 0 and 4.08 volts, with a resolution of
		0.016 volt (except IT8603E, IT8721F/IT8758E and IT8728F: 0.012 volt.) The
		battery voltage in8 does not have limit registers.

		On the IT8603E, IT8721F/IT8758E, IT8781F, IT8782F, and IT8783E/F, some
		zero'; this is important for negative voltage measurements. On most chips, all
		voltage inputs can measure voltages between 0 and 4.08 volts, with a resolution
		of 0.016 volt. IT8603E, IT8721F/IT8758E and IT8728F can measure between 0 and
		3.06 volts, with a resolution of 0.012 volt. IT8732F can measure between 0 and
		2.8 volts with a resolution of 0.0109 volt. The battery voltage in8 does not
		have limit registers.

		On the IT8603E, IT8721F/IT8758E, IT8732F, IT8781F, IT8782F, and IT8783E/F, some
		voltage inputs are internal and scaled inside the chip:
		* in3 (optional)
		* in7 (optional for IT8781F, IT8782F, and IT8783E/F)

drivers/hwmon/Kconfig

+2 −2

Original line number	Diff line number	Diff line
		@@ -609,8 +609,8 @@ config SENSORS_IT87
		depends on !PPC
		select HWMON_VID
		help
		If you say yes here you get support for ITE IT8705F, IT8712F,
		IT8716F, IT8718F, IT8720F, IT8721F, IT8726F, IT8728F, IT8758E,
		If you say yes here you get support for ITE IT8705F, IT8712F, IT8716F,
		IT8718F, IT8720F, IT8721F, IT8726F, IT8728F, IT8732F, IT8758E,
		IT8771E, IT8772E, IT8781F, IT8782F, IT8783E/F, IT8786E, IT8790E,
		IT8603E, IT8620E, and IT8623E sensor chips, and the SiS950 clone.

drivers/hwmon/it87.c

+36 −7

Original line number	Diff line number	Diff line
		@@ -21,6 +21,7 @@
		* IT8721F Super I/O chip w/LPC interface
		* IT8726F Super I/O chip w/LPC interface
		* IT8728F Super I/O chip w/LPC interface
		* IT8732F Super I/O chip w/LPC interface
		* IT8758E Super I/O chip w/LPC interface
		* IT8771E Super I/O chip w/LPC interface
		* IT8772E Super I/O chip w/LPC interface
		@@ -69,8 +70,9 @@

		#define DRVNAME "it87"

		enum chips { it87, it8712, it8716, it8718, it8720, it8721, it8728, it8771,
		it8772, it8781, it8782, it8783, it8786, it8790, it8603, it8620 };
		enum chips { it87, it8712, it8716, it8718, it8720, it8721, it8728, it8732,
		it8771, it8772, it8781, it8782, it8783, it8786, it8790, it8603,
		it8620 };

		static unsigned short force_id;
		module_param(force_id, ushort, 0);
		@@ -148,6 +150,7 @@ static inline void superio_exit(void)
		#define IT8721F_DEVID 0x8721
		#define IT8726F_DEVID 0x8726
		#define IT8728F_DEVID 0x8728
		#define IT8732F_DEVID 0x8732
		#define IT8771E_DEVID 0x8771
		#define IT8772E_DEVID 0x8772
		#define IT8781F_DEVID 0x8781
		@@ -265,6 +268,7 @@ struct it87_devices {
		#define FEAT_VID (1 << 9) /* Set if chip supports VID */
		#define FEAT_IN7_INTERNAL (1 << 10) /* Set if in7 is internal */
		#define FEAT_SIX_FANS (1 << 11) /* Supports six fans */
		#define FEAT_10_9MV_ADC (1 << 12)

		static const struct it87_devices it87_devices[] = {
		[it87] = {
		@@ -315,6 +319,15 @@ static const struct it87_devices it87_devices[] = {
		\| FEAT_IN7_INTERNAL,
		.peci_mask = 0x07,
		},
		[it8732] = {
		.name = "it8732",
		.suffix = "F",
		.features = FEAT_NEWER_AUTOPWM \| FEAT_16BIT_FANS
		\| FEAT_TEMP_OFFSET \| FEAT_TEMP_OLD_PECI \| FEAT_TEMP_PECI
		\| FEAT_10_9MV_ADC \| FEAT_IN7_INTERNAL,
		.peci_mask = 0x07,
		.old_peci_mask = 0x02, /* Actually reports PCH */
		},
		[it8771] = {
		.name = "it8771",
		.suffix = "E",
		@@ -391,6 +404,7 @@ static const struct it87_devices it87_devices[] = {

		#define has_16bit_fans(data) ((data)->features & FEAT_16BIT_FANS)
		#define has_12mv_adc(data) ((data)->features & FEAT_12MV_ADC)
		#define has_10_9mv_adc(data) ((data)->features & FEAT_10_9MV_ADC)
		#define has_newer_autopwm(data) ((data)->features & FEAT_NEWER_AUTOPWM)
		#define has_old_autopwm(data) ((data)->features & FEAT_OLD_AUTOPWM)
		#define has_temp_offset(data) ((data)->features & FEAT_TEMP_OFFSET)
		@@ -475,7 +489,14 @@ struct it87_data {

		static int adc_lsb(const struct it87_data *data, int nr)
		{
		int lsb = has_12mv_adc(data) ? 12 : 16;
		int lsb;

		if (has_12mv_adc(data))
		lsb = 120;
		else if (has_10_9mv_adc(data))
		lsb = 109;
		else
		lsb = 160;
		if (data->in_scaled & (1 << nr))
		lsb <<= 1;
		return lsb;
		@@ -483,13 +504,13 @@ static int adc_lsb(const struct it87_data *data, int nr)

		static u8 in_to_reg(const struct it87_data *data, int nr, long val)
		{
		val = DIV_ROUND_CLOSEST(val, adc_lsb(data, nr));
		val = DIV_ROUND_CLOSEST(val * 10, adc_lsb(data, nr));
		return clamp_val(val, 0, 255);
		}

		static int in_from_reg(const struct it87_data *data, int nr, int val)
		{
		return val * adc_lsb(data, nr);
		return DIV_ROUND_CLOSEST(val * adc_lsb(data, nr), 10);
		}

		static inline u8 FAN_TO_REG(long rpm, int div)
		@@ -1515,9 +1536,14 @@ static ssize_t show_label(struct device dev, struct device_attribute attr,
		};
		struct it87_data *data = dev_get_drvdata(dev);
		int nr = to_sensor_dev_attr(attr)->index;
		const char *label;

		return sprintf(buf, "%s\n", has_12mv_adc(data) ? labels_it8721[nr]
		: labels[nr]);
		if (has_12mv_adc(data) \|\| has_10_9mv_adc(data))
		label = labels_it8721[nr];
		else
		label = labels[nr];

		return sprintf(buf, "%s\n", label);
		}
		static SENSOR_DEVICE_ATTR(in3_label, S_IRUGO, show_label, NULL, 0);
		static SENSOR_DEVICE_ATTR(in7_label, S_IRUGO, show_label, NULL, 1);
		@@ -1853,6 +1879,9 @@ static int __init it87_find(unsigned short *address,
		case IT8728F_DEVID:
		sio_data->type = it8728;
		break;
		case IT8732F_DEVID:
		sio_data->type = it8732;
		break;
		case IT8771E_DEVID:
		sio_data->type = it8771;
		break;

Admin message