Merge branch 'clps711x/soc' into next/soc

Cirrus Logic CLPS711X GPIO controller

Required properties:

- compatible: Should be "cirrus,clps711x-gpio"

- reg: Physical base GPIO controller registers location and length.

  There should be two registers, first is DATA register, the second

  is DIRECTION.

- gpio-controller: Marks the device node as a gpio controller.

- #gpio-cells: Should be two. The first cell is the pin number and

  the second cell is used to specify the gpio polarity:

    0 = active high

    1 = active low

Note: Each GPIO port should have an alias correctly numbered in "aliases"

node.

Example:

aliases {

	gpio0 = &porta;

};

porta: gpio@80000000 {

	compatible = "cirrus,clps711x-gpio";

	reg = <0x80000000 0x1>, <0x80000040 0x1>;

	gpio-controller;

	#gpio-cells = <2>;

};

      fix_the_problem(ucp->dar);

    }

When in an active transaction that takes a signal, we need to be careful with

the stack.  It's possible that the stack has moved back up after the tbegin.

The obvious case here is when the tbegin is called inside a function that

returns before a tend.  In this case, the stack is part of the checkpointed

transactional memory state.  If we write over this non transactionally or in

suspend, we are in trouble because if we get a tm abort, the program counter and

stack pointer will be back at the tbegin but our in memory stack won't be valid

anymore.

To avoid this, when taking a signal in an active transaction, we need to use

the stack pointer from the checkpointed state, rather than the speculated

state.  This ensures that the signal context (written tm suspended) will be

written below the stack required for the rollback.  The transaction is aborted

becuase of the treclaim, so any memory written between the tbegin and the

signal will be rolled back anyway.

For signals taken in non-TM or suspended mode, we use the

normal/non-checkpointed stack pointer.

Failure cause codes used by kernel

==================================

kernel aborted a transaction:

 TM_CAUSE_RESCHED       Thread was rescheduled.

 TM_CAUSE_TLBI          Software TLB invalide.

 TM_CAUSE_FAC_UNAV      FP/VEC/VSX unavailable trap.

 TM_CAUSE_SYSCALL       Currently unused; future syscalls that must abort

                        transactions for consistency will use this.

 TM_CAUSE_SIGNAL        Signal delivered.

 TM_CAUSE_MISC          Currently unused.

 TM_CAUSE_ALIGNMENT     Alignment fault.

 TM_CAUSE_EMULATE       Emulation that touched memory.

These can be checked by the user program's abort handler as TEXASR[0:7].

These can be checked by the user program's abort handler as TEXASR[0:7].  If

bit 7 is set, it indicates that the error is consider persistent.  For example

a TM_CAUSE_ALIGNMENT will be persistent while a TM_CAUSE_RESCHED will not.q

GDB

===

F:	drivers/net/wan/sdla.c

FRAMEBUFFER LAYER

M:	Florian Tobias Schandinat <FlorianSchandinat@gmx.de>

M:	Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>

M:	Tomi Valkeinen <tomi.valkeinen@ti.com>

L:	linux-fbdev@vger.kernel.org

W:	http://linux-fbdev.sourceforge.net/

Q:	http://patchwork.kernel.org/project/linux-fbdev/list/

T:	git git://github.com/schandinat/linux-2.6.git fbdev-next

T:	git git://git.kernel.org/pub/scm/linux/kernel/git/plagnioj/linux-fbdev.git

S:	Maintained

F:	Documentation/fb/

F:	Documentation/devicetree/bindings/fb/

T:	git git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux.git

S:	Maintained

F:	arch/parisc/

F:	Documentation/parisc/

F:	drivers/parisc/

F:	drivers/char/agp/parisc-agp.c

F:	drivers/input/serio/gscps2.c

F:	drivers/parport/parport_gsc.*

F:	drivers/tty/serial/8250/8250_gsc.c

F:	drivers/video/sti*

F:	drivers/video/console/sti*

F:	drivers/video/logo/logo_parisc*

PC87360 HARDWARE MONITORING DRIVER

M:	Jim Cromie <jim.cromie@gmail.com>

VERSION = 3

PATCHLEVEL = 10

SUBLEVEL = 0

EXTRAVERSION = -rc3

EXTRAVERSION = -rc4

NAME = Unicycling Gorilla

# *DOCUMENTATION*

	select ARCH_REQUIRE_GPIOLIB

	select AUTO_ZRELADDR

	select CLKDEV_LOOKUP

	select CLKSRC_MMIO

	select COMMON_CLK

	select CPU_ARM720T

	select GENERIC_CLOCKEVENTS

	select MFD_SYSCON

	select MULTI_IRQ_HANDLER

	select NEED_MACH_MEMORY_H

	select SPARSE_IRQ

	help

	  Support for Cirrus Logic 711x/721x/731x based boards.