Commit e9a1c52c authored by Stefan Richter's avatar Stefan Richter Committed by Linus Torvalds
Browse files

[PATCH] sbp2: add read_capacity workaround for iPod 

Apple decided to copy some USB stupidity over to FireWire.

The sector number returned by iPods from read_capacity is one too many.
This may cause I/O errors, especially if the kernel is configured for EFI
partition support. We use the same workaround as usb-storage but have to
check for different model IDs.

	http://marc.theaimsgroup.com/?t=114233262300001
	https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=187409



Acknowledgements:
  Diagnosis and therapy by Mathieu Chouquet-Stringer <ml2news@free.fr>,
  additional data about affected and unaffected Apple hardware from
  Vladimir Kotal, Sander De Graaf, Bryan Olmstead and Hugh Dixon.

Signed-off-by: default avatarStefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
parent 24d3bf88

drivers/ieee1394/sbp2.c

+45 −4
Original line number Diff line number Diff line
@@ -151,6 +151,11 @@ MODULE_PARM_DESC(exclusive_login, "Exclusive login to sbp2 device (default = 1)" 
 * - skip mode page 8

 *   Suppress sending of mode_sense for mode page 8 if the device pretends to

 *   support the SCSI Primary Block commands instead of Reduced Block Commands.

 *

 * - fix capacity

 *   Tell sd_mod to correct the last sector number reported by read_capacity.

 *   Avoids access beyond actual disk limits on devices with an off-by-one bug.

 *   Don't use this with devices which don't have this bug.

 */

static int sbp2_default_workarounds;

module_param_named(workarounds, sbp2_default_workarounds, int, 0644);
@@ -158,6 +163,7 @@ MODULE_PARM_DESC(workarounds, "Work around device bugs (default = 0" 
	", 128kB max transfer = " __stringify(SBP2_WORKAROUND_128K_MAX_TRANS)

	", 36 byte inquiry = "    __stringify(SBP2_WORKAROUND_INQUIRY_36)

	", skip mode page 8 = "   __stringify(SBP2_WORKAROUND_MODE_SENSE_8)

	", fix capacity = "       __stringify(SBP2_WORKAROUND_FIX_CAPACITY)

	", or a combination)");



/* legacy parameter */
@@ -291,6 +297,7 @@ static struct hpsb_protocol_driver sbp2_driver = { 
 */

static const struct {

	u32 firmware_revision;

	u32 model_id;

	unsigned workarounds;

} sbp2_workarounds_table[] = {

	/* TSB42AA9 */ {
@@ -305,6 +312,31 @@ static const struct { 
	/* Symbios bridge */ {

		.firmware_revision	= 0xa0b800,

		.workarounds		= SBP2_WORKAROUND_128K_MAX_TRANS,

	},

	/*

	 * Note about the following Apple iPod blacklist entries:

	 *

	 * There are iPods (2nd gen, 3rd gen) with model_id==0.  Since our

	 * matching logic treats 0 as a wildcard, we cannot match this ID

	 * without rewriting the matching routine.  Fortunately these iPods

	 * do not feature the read_capacity bug according to one report.

	 * Read_capacity behaviour as well as model_id could change due to

	 * Apple-supplied firmware updates though.

	 */

	/* iPod 4th generation */ {

		.firmware_revision	= 0x0a2700,

		.model_id		= 0x000021,

		.workarounds		= SBP2_WORKAROUND_FIX_CAPACITY,

	},

	/* iPod mini */ {

		.firmware_revision	= 0x0a2700,

		.model_id		= 0x000023,

		.workarounds		= SBP2_WORKAROUND_FIX_CAPACITY,

	},

	/* iPod Photo */ {

		.firmware_revision	= 0x0a2700,

		.model_id		= 0x00007e,

		.workarounds		= SBP2_WORKAROUND_FIX_CAPACITY,

	}

};
@@ -1556,18 +1588,25 @@ static void sbp2_parse_unit_directory(struct scsi_id_instance_data *scsi_id, 
	}



	for (i = 0; i < ARRAY_SIZE(sbp2_workarounds_table); i++) {

		if (sbp2_workarounds_table[i].firmware_revision !=

		if (sbp2_workarounds_table[i].firmware_revision &&

		    sbp2_workarounds_table[i].firmware_revision !=

		    (firmware_revision & 0xffff00))

			continue;

		if (sbp2_workarounds_table[i].model_id &&

		    sbp2_workarounds_table[i].model_id != ud->model_id)

			continue;

		workarounds |= sbp2_workarounds_table[i].workarounds;

		break;

	}



	if (workarounds)

		SBP2_INFO("Workarounds for node " NODE_BUS_FMT ": "

			  "0x%x (firmware_revision 0x%x)",

		SBP2_INFO("Workarounds for node " NODE_BUS_FMT ": 0x%x "

			  "(firmware_revision 0x%06x, vendor_id 0x%06x,"

			  " model_id 0x%06x)",

			  NODE_BUS_ARGS(ud->ne->host, ud->ne->nodeid),

			  workarounds, firmware_revision);

			  workarounds, firmware_revision,

			  ud->vendor_id ? ud->vendor_id : ud->ne->vendor_id,

			  ud->model_id);



	/* We would need one SCSI host template for each target to adjust

	 * max_sectors on the fly, therefore warn only. */
@@ -2488,6 +2527,8 @@ static int sbp2scsi_slave_configure(struct scsi_device *sdev) 
	if (sdev->type == TYPE_DISK &&

	    scsi_id->workarounds & SBP2_WORKAROUND_MODE_SENSE_8)

		sdev->skip_ms_page_8 = 1;

	if (scsi_id->workarounds & SBP2_WORKAROUND_FIX_CAPACITY)

		sdev->fix_capacity = 1;

	return 0;

}

drivers/ieee1394/sbp2.h

+1 −0
Original line number Diff line number Diff line
@@ -238,6 +238,7 @@ struct sbp2_status_block { 
#define SBP2_WORKAROUND_128K_MAX_TRANS	0x1

#define SBP2_WORKAROUND_INQUIRY_36	0x2

#define SBP2_WORKAROUND_MODE_SENSE_8	0x4

#define SBP2_WORKAROUND_FIX_CAPACITY	0x8



/* This is the two dma types we use for cmd_dma below */

enum cmd_dma_types {

CRA Git | Maintained and supported by SUSTech CRA and CCSE