Commit e8b1cc3a authored by Per Forlin's avatar Per Forlin Committed by Linus Walleij
Browse files

ux500: Add DMA support for U5500 



Add basic DMA configuration for u5500 supporting memcpy.
Make way for SDI0 dma support by setting SDI0 to -1,
indicating it will be configured in runtime.

Signed-off-by: default avatarPer Forlin <per.forlin@linaro.org>
Signed-off-by: default avatarLinus Walleij <linus.walleij@stericsson.com>
parent bab263e0

arch/arm/mach-ux500/Makefile

+1 −1
Original line number Diff line number Diff line
@@ -3,7 +3,7 @@ 
#



obj-y				:= clock.o cpu.o devices.o devices-common.o

obj-$(CONFIG_UX500_SOC_DB5500)	+= cpu-db5500.o devices-db5500.o

obj-$(CONFIG_UX500_SOC_DB5500)	+= cpu-db5500.o devices-db5500.o dma-db5500.o

obj-$(CONFIG_UX500_SOC_DB8500)	+= cpu-db8500.o devices-db8500.o prcmu.o

obj-$(CONFIG_MACH_U8500_MOP)	+= board-mop500.o board-mop500-sdi.o

obj-$(CONFIG_MACH_U5500)	+= board-u5500.o board-u5500-sdi.o

arch/arm/mach-ux500/cpu-db5500.c

+2 −0
Original line number Diff line number Diff line
@@ -135,6 +135,8 @@ void __init u5500_map_io(void) 


void __init u5500_init_devices(void)

{

	db5500_dma_init();



	db5500_add_rtc();



	platform_add_devices(u5500_platform_devs,

arch/arm/mach-ux500/dma-db5500.c

0 → 100644
+120 −0
Original line number Diff line number Diff line 
/*

 * Copyright (C) ST-Ericsson SA 2010

 *

 * Author: Per Forlin <per.forlin@stericsson.com> for ST-Ericsson

 * Author: Jonas Aaberg <jonas.aberg@stericsson.com> for ST-Ericsson

 * Author: Rabin Vincent <rabinv.vincent@stericsson.com> for ST-Ericsson

 *

 * License terms: GNU General Public License (GPL), version 2

 */



#include <linux/kernel.h>

#include <linux/platform_device.h>



#include <plat/ste_dma40.h>

#include <mach/setup.h>

#include <mach/hardware.h>



#include "ste-dma40-db5500.h"



static struct resource dma40_resources[] = {

	[0] = {

		.start = U5500_DMA_BASE,

		.end   = U5500_DMA_BASE + SZ_4K - 1,

		.flags = IORESOURCE_MEM,

		.name  = "base",

	},

	[1] = {

		.start = U5500_DMA_LCPA_BASE,

		.end   = U5500_DMA_LCPA_BASE + 2 * SZ_1K - 1,

		.flags = IORESOURCE_MEM,

		.name  = "lcpa",

	},

	[2] = {

		.start = IRQ_DB5500_DMA,

		.end   = IRQ_DB5500_DMA,

		.flags = IORESOURCE_IRQ

	}

};



/* Default configuration for physical memcpy */

static struct stedma40_chan_cfg dma40_memcpy_conf_phy = {

	.mode = STEDMA40_MODE_PHYSICAL,

	.dir = STEDMA40_MEM_TO_MEM,



	.src_info.data_width = STEDMA40_BYTE_WIDTH,

	.src_info.psize = STEDMA40_PSIZE_PHY_1,

	.src_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL,



	.dst_info.data_width = STEDMA40_BYTE_WIDTH,

	.dst_info.psize = STEDMA40_PSIZE_PHY_1,

	.dst_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL,

};



/* Default configuration for logical memcpy */

static struct stedma40_chan_cfg dma40_memcpy_conf_log = {

	.dir = STEDMA40_MEM_TO_MEM,



	.src_info.data_width = STEDMA40_BYTE_WIDTH,

	.src_info.psize = STEDMA40_PSIZE_LOG_1,

	.src_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL,



	.dst_info.data_width = STEDMA40_BYTE_WIDTH,

	.dst_info.psize = STEDMA40_PSIZE_LOG_1,

	.dst_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL,

};



/*

 * Mapping between soruce event lines and physical device address This was

 * created assuming that the event line is tied to a device and therefore the

 * address is constant, however this is not true for at least USB, and the

 * values are just placeholders for USB.  This table is preserved and used for

 * now.

 */

static const dma_addr_t dma40_rx_map[DB5500_DMA_NR_DEV] = {

	[DB5500_DMA_DEV24_SDMMC0_RX] = -1,

};



/* Mapping between destination event lines and physical device address */

static const dma_addr_t dma40_tx_map[DB5500_DMA_NR_DEV] = {

	[DB5500_DMA_DEV24_SDMMC0_TX] = -1,

};



static int dma40_memcpy_event[] = {

	DB5500_DMA_MEMCPY_TX_1,

	DB5500_DMA_MEMCPY_TX_2,

	DB5500_DMA_MEMCPY_TX_3,

	DB5500_DMA_MEMCPY_TX_4,

	DB5500_DMA_MEMCPY_TX_5,

};



static struct stedma40_platform_data dma40_plat_data = {

	.dev_len		= ARRAY_SIZE(dma40_rx_map),

	.dev_rx			= dma40_rx_map,

	.dev_tx			= dma40_tx_map,

	.memcpy			= dma40_memcpy_event,

	.memcpy_len		= ARRAY_SIZE(dma40_memcpy_event),

	.memcpy_conf_phy	= &dma40_memcpy_conf_phy,

	.memcpy_conf_log	= &dma40_memcpy_conf_log,

	.disabled_channels	= {-1},

};



static struct platform_device dma40_device = {

	.dev = {

		.platform_data = &dma40_plat_data,

	},

	.name		= "dma40",

	.id		= 0,

	.num_resources	= ARRAY_SIZE(dma40_resources),

	.resource	= dma40_resources

};



void __init db5500_dma_init(void)

{

	int ret;



	ret = platform_device_register(&dma40_device);

	if (ret)

		dev_err(&dma40_device.dev, "unable to register device: %d\n", ret);



}

arch/arm/mach-ux500/include/mach/db5500-regs.h

+4 −0
Original line number Diff line number Diff line
@@ -114,4 +114,8 @@ 
#define U5500_MBOX2_LOCAL_START	(U5500_MBOX_BASE + 0x20)

#define U5500_MBOX2_LOCAL_END	(U5500_MBOX_BASE + 0x3F)



#define U5500_ESRAM_BASE		0x40000000

#define U5500_ESRAM_DMA_LCPA_OFFSET	0x10000

#define U5500_DMA_LCPA_BASE    (U5500_ESRAM_BASE + U5500_ESRAM_DMA_LCPA_OFFSET)



#endif

arch/arm/mach-ux500/include/mach/setup.h

+2 −0
Original line number Diff line number Diff line
@@ -25,6 +25,8 @@ extern void __init ux500_init_irq(void); 


extern void __init u5500_sdi_init(void);



extern void __init db5500_dma_init(void);



/* We re-use nomadik_timer for this platform */

extern void nmdk_timer_init(void);

CRA Git | Maintained and supported by SUSTech CRA and CCSE