Commit e855aac8 authored by Hannes Eder's avatar Hannes Eder Committed by David S. Miller
Browse files

drivers/net/ixgbe: fix sparse warnings: make symbols static 



Fix this sparse warnings:

  drivers/net/ixgbe/ixgbe_82598.c:180:5: warning: symbol 'ixgbe_get_copper_link_capabilities_82598' was not declared. Should it be static?
  drivers/net/ixgbe/ixgbe_82598.c:245:5: warning: symbol 'ixgbe_setup_fc_82598' was not declared. Should it be static?
  drivers/net/ixgbe/ixgbe_82598.c:729:5: warning: symbol 'ixgbe_set_vmdq_82598' was not declared. Should it be static?
  drivers/net/ixgbe/ixgbe_82598.c:773:5: warning: symbol 'ixgbe_set_vfta_82598' was not declared. Should it be static?
  drivers/net/ixgbe/ixgbe_82598.c:897:5: warning: symbol 'ixgbe_read_analog_reg8_82598' was not declared. Should it be static?
  drivers/net/ixgbe/ixgbe_82598.c:919:5: warning: symbol 'ixgbe_write_analog_reg8_82598' was not declared. Should it be static?
  drivers/net/ixgbe/ixgbe_82598.c:940:5: warning: symbol 'ixgbe_read_i2c_eeprom_82598' was not declared. Should it be static?
  drivers/net/ixgbe/ixgbe_82598.c:1000:5: warning: symbol 'ixgbe_get_supported_physical_layer_82598' was not declared. Should it be static?
  drivers/net/ixgbe/ixgbe_dcb_82598.c:100:5: warning: symbol 'ixgbe_dcb_config_packet_buffers_82598' was not declared. Should it be static?

Signed-off-by: default avatarHannes Eder <hannes@hanneseder.net>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 0e49e645

drivers/net/ixgbe/ixgbe_82598.c

+12 −12
Original line number Diff line number Diff line
@@ -177,7 +177,7 @@ static s32 ixgbe_get_link_capabilities_82598(struct ixgbe_hw *hw, 
 *

 *  Determines the link capabilities by reading the AUTOC register.

 **/

s32 ixgbe_get_copper_link_capabilities_82598(struct ixgbe_hw *hw,

static s32 ixgbe_get_copper_link_capabilities_82598(struct ixgbe_hw *hw,

						    ixgbe_link_speed *speed,

						    bool *autoneg)

{
@@ -242,7 +242,7 @@ static enum ixgbe_media_type ixgbe_get_media_type_82598(struct ixgbe_hw *hw) 
 *  Configures the flow control settings based on SW configuration.  This

 *  function is used for 802.3x flow control configuration only.

 **/

s32 ixgbe_setup_fc_82598(struct ixgbe_hw *hw, s32 packetbuf_num)

static s32 ixgbe_setup_fc_82598(struct ixgbe_hw *hw, s32 packetbuf_num)

{

	u32 frctl_reg;

	u32 rmcs_reg;
@@ -726,7 +726,7 @@ static s32 ixgbe_reset_hw_82598(struct ixgbe_hw *hw) 
 *  @rar: receive address register index to associate with a VMDq index

 *  @vmdq: VMDq set index

 **/

s32 ixgbe_set_vmdq_82598(struct ixgbe_hw *hw, u32 rar, u32 vmdq)

static s32 ixgbe_set_vmdq_82598(struct ixgbe_hw *hw, u32 rar, u32 vmdq)

{

	u32 rar_high;
@@ -770,7 +770,7 @@ static s32 ixgbe_clear_vmdq_82598(struct ixgbe_hw *hw, u32 rar, u32 vmdq) 
 *

 *  Turn on/off specified VLAN in the VLAN filter table.

 **/

s32 ixgbe_set_vfta_82598(struct ixgbe_hw *hw, u32 vlan, u32 vind,

static s32 ixgbe_set_vfta_82598(struct ixgbe_hw *hw, u32 vlan, u32 vind,

				bool vlan_on)

{

	u32 regindex;
@@ -894,7 +894,7 @@ static s32 ixgbe_blink_led_stop_82598(struct ixgbe_hw *hw, u32 index) 
 *

 *  Performs read operation to Atlas analog register specified.

 **/

s32 ixgbe_read_analog_reg8_82598(struct ixgbe_hw *hw, u32 reg, u8 *val)

static s32 ixgbe_read_analog_reg8_82598(struct ixgbe_hw *hw, u32 reg, u8 *val)

{

	u32  atlas_ctl;
@@ -916,7 +916,7 @@ s32 ixgbe_read_analog_reg8_82598(struct ixgbe_hw *hw, u32 reg, u8 *val) 
 *

 *  Performs write operation to Atlas analog register specified.

 **/

s32 ixgbe_write_analog_reg8_82598(struct ixgbe_hw *hw, u32 reg, u8 val)

static s32 ixgbe_write_analog_reg8_82598(struct ixgbe_hw *hw, u32 reg, u8 val)

{

	u32  atlas_ctl;
@@ -937,7 +937,7 @@ s32 ixgbe_write_analog_reg8_82598(struct ixgbe_hw *hw, u32 reg, u8 val) 
 *

 *  Performs byte read operation to SFP module's EEPROM over I2C interface.

 **/

s32 ixgbe_read_i2c_eeprom_82598(struct ixgbe_hw *hw, u8 byte_offset,

static s32 ixgbe_read_i2c_eeprom_82598(struct ixgbe_hw *hw, u8 byte_offset,

				       u8 *eeprom_data)

{

	s32 status = 0;
@@ -997,7 +997,7 @@ out: 
 *

 *  Determines physical layer capabilities of the current configuration.

 **/

s32 ixgbe_get_supported_physical_layer_82598(struct ixgbe_hw *hw)

static s32 ixgbe_get_supported_physical_layer_82598(struct ixgbe_hw *hw)

{

	s32 physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN;

drivers/net/ixgbe/ixgbe_dcb_82598.c

+2 −2
Original line number Diff line number Diff line
@@ -97,7 +97,7 @@ s32 ixgbe_dcb_get_pfc_stats_82598(struct ixgbe_hw *hw, 
 *

 * Configure packet buffers for DCB mode.

 */

s32 ixgbe_dcb_config_packet_buffers_82598(struct ixgbe_hw *hw,

static s32 ixgbe_dcb_config_packet_buffers_82598(struct ixgbe_hw *hw,

						 struct ixgbe_dcb_config *dcb_config)

{

	s32 ret_val = 0;

CRA Git | Maintained and supported by SUSTech CRA and CCSE