mfd: cros_ec: move HDMI CEC API definition (e849b874) · Commits · 戴 / test

include/linux/mfd/cros_ec_commands.h

+75 −73

Original line number	Diff line number	Diff line
		@@ -3211,6 +3211,81 @@ struct ec_response_battery_vendor_param {
		} __ec_align4;

		/*****************************************************************************/
		/*
		* HDMI CEC commands
		*
		* These commands are for sending and receiving message via HDMI CEC
		*/

		#define MAX_CEC_MSG_LEN 16

		/* CEC message from the AP to be written on the CEC bus */
		#define EC_CMD_CEC_WRITE_MSG 0x00B8

		/**
		* struct ec_params_cec_write - Message to write to the CEC bus
		* @msg: message content to write to the CEC bus
		*/
		struct ec_params_cec_write {
		uint8_t msg[MAX_CEC_MSG_LEN];
		} __ec_align1;

		/* Set various CEC parameters */
		#define EC_CMD_CEC_SET 0x00BA

		/**
		* struct ec_params_cec_set - CEC parameters set
		* @cmd: parameter type, can be CEC_CMD_ENABLE or CEC_CMD_LOGICAL_ADDRESS
		* @val: in case cmd is CEC_CMD_ENABLE, this field can be 0 to disable CEC
		* or 1 to enable CEC functionality, in case cmd is
		* CEC_CMD_LOGICAL_ADDRESS, this field encodes the requested logical
		* address between 0 and 15 or 0xff to unregister
		*/
		struct ec_params_cec_set {
		uint8_t cmd; /* enum cec_command */
		uint8_t val;
		} __ec_align1;

		/* Read various CEC parameters */
		#define EC_CMD_CEC_GET 0x00BB

		/**
		* struct ec_params_cec_get - CEC parameters get
		* @cmd: parameter type, can be CEC_CMD_ENABLE or CEC_CMD_LOGICAL_ADDRESS
		*/
		struct ec_params_cec_get {
		uint8_t cmd; /* enum cec_command */
		} __ec_align1;

		/**
		* struct ec_response_cec_get - CEC parameters get response
		* @val: in case cmd was CEC_CMD_ENABLE, this field will 0 if CEC is
		* disabled or 1 if CEC functionality is enabled,
		* in case cmd was CEC_CMD_LOGICAL_ADDRESS, this will encode the
		* configured logical address between 0 and 15 or 0xff if unregistered
		*/
		struct ec_response_cec_get {
		uint8_t val;
		} __ec_align1;

		/* CEC parameters command */
		enum cec_command {
		/* CEC reading, writing and events enable */
		CEC_CMD_ENABLE,
		/* CEC logical address */
		CEC_CMD_LOGICAL_ADDRESS,
		};

		/* Events from CEC to AP */
		enum mkbp_cec_event {
		/* Outgoing message was acknowledged by a follower */
		EC_MKBP_CEC_SEND_OK = BIT(0),
		/* Outgoing message was not acknowledged */
		EC_MKBP_CEC_SEND_FAILED = BIT(1),
		};

		/*****************************************************************************/

		/* Commands for I2S recording on audio codec. */

		#define EC_CMD_CODEC_I2S 0x00BC
		@@ -3339,79 +3414,6 @@ struct ec_params_reboot_ec {
		*/
		#define EC_CMD_GET_PANIC_INFO 0x00D3

		/*****************************************************************************/
		/*
		* HDMI CEC commands
		*
		* These commands are for sending and receiving message via HDMI CEC
		*/
		#define EC_MAX_CEC_MSG_LEN 16

		/* CEC message from the AP to be written on the CEC bus */
		#define EC_CMD_CEC_WRITE_MSG 0x00B8

		/**
		* struct ec_params_cec_write - Message to write to the CEC bus
		* @msg: message content to write to the CEC bus
		*/
		struct ec_params_cec_write {
		uint8_t msg[EC_MAX_CEC_MSG_LEN];
		} __ec_align1;

		/* Set various CEC parameters */
		#define EC_CMD_CEC_SET 0x00BA

		/**
		* struct ec_params_cec_set - CEC parameters set
		* @cmd: parameter type, can be CEC_CMD_ENABLE or CEC_CMD_LOGICAL_ADDRESS
		* @val: in case cmd is CEC_CMD_ENABLE, this field can be 0 to disable CEC
		* or 1 to enable CEC functionality, in case cmd is CEC_CMD_LOGICAL_ADDRESS,
		* this field encodes the requested logical address between 0 and 15
		* or 0xff to unregister
		*/
		struct ec_params_cec_set {
		uint8_t cmd; /* enum cec_command */
		uint8_t val;
		} __ec_align1;

		/* Read various CEC parameters */
		#define EC_CMD_CEC_GET 0x00BB

		/**
		* struct ec_params_cec_get - CEC parameters get
		* @cmd: parameter type, can be CEC_CMD_ENABLE or CEC_CMD_LOGICAL_ADDRESS
		*/
		struct ec_params_cec_get {
		uint8_t cmd; /* enum cec_command */
		} __ec_align1;

		/**
		* struct ec_response_cec_get - CEC parameters get response
		* @val: in case cmd was CEC_CMD_ENABLE, this field will 0 if CEC is
		* disabled or 1 if CEC functionality is enabled,
		* in case cmd was CEC_CMD_LOGICAL_ADDRESS, this will encode the
		* configured logical address between 0 and 15 or 0xff if unregistered
		*/
		struct ec_response_cec_get {
		uint8_t val;
		} __ec_align1;

		/* CEC parameters command */
		enum ec_cec_command {
		/* CEC reading, writing and events enable */
		CEC_CMD_ENABLE,
		/* CEC logical address */
		CEC_CMD_LOGICAL_ADDRESS,
		};

		/* Events from CEC to AP */
		enum mkbp_cec_event {
		/* Outgoing message was acknowledged by a follower */
		EC_MKBP_CEC_SEND_OK = BIT(0),
		/* Outgoing message was not acknowledged */
		EC_MKBP_CEC_SEND_FAILED = BIT(1),
		};

		/*****************************************************************************/
		/*
		* Special commands

Admin message