Commit e844b1da authored by Enric Balletbo i Serra's avatar Enric Balletbo i Serra Committed by Tony Lindgren
Browse files

omap3: Add minimal OMAP3 IGEP module support 



The OMAP3 IGEP module is a low-power, high performance production-ready
system-on-module (SOM) based on TI's OMAP3 family. More about this
board at www.igep.es.

Signed-off-by: default avatarEnric Balletbo i Serra <eballetbo@gmail.com>
[tony@atomide.com: updated for the mmc changes and to be selected by default]
Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
parent bc3caae8

arch/arm/mach-omap2/Kconfig

+6 −0
Original line number Diff line number Diff line
@@ -254,6 +254,12 @@ config MACH_IGEP0020 
	default y

	select OMAP_PACKAGE_CBB



config MACH_IGEP0030

	bool "IGEP OMAP3 module"

	depends on ARCH_OMAP3

	default y

	select OMAP_PACKAGE_CBB



config MACH_SBC3530

	bool "OMAP3 SBC STALKER board"

	depends on ARCH_OMAP3

arch/arm/mach-omap2/Makefile

+2 −0
Original line number Diff line number Diff line
@@ -158,6 +158,8 @@ obj-$(CONFIG_MACH_CM_T35) += board-cm-t35.o \ 
obj-$(CONFIG_MACH_CM_T3517)		+= board-cm-t3517.o

obj-$(CONFIG_MACH_IGEP0020)		+= board-igep0020.o \

					   hsmmc.o

obj-$(CONFIG_MACH_IGEP0030)		+= board-igep0030.o \

					   hsmmc.o

obj-$(CONFIG_MACH_OMAP3_TOUCHBOOK)	+= board-omap3touchbook.o \

					   hsmmc.o

obj-$(CONFIG_MACH_OMAP_4430SDP)		+= board-4430sdp.o \

arch/arm/mach-omap2/board-igep0030.c

0 → 100644
+402 −0
Original line number Diff line number Diff line 
/*

 * Copyright (C) 2010 - ISEE 2007 SL

 *

 * Modified from mach-omap2/board-generic.c

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License version 2 as

 * published by the Free Software Foundation.

 */



#include <linux/kernel.h>

#include <linux/init.h>

#include <linux/platform_device.h>

#include <linux/delay.h>

#include <linux/err.h>

#include <linux/clk.h>

#include <linux/io.h>

#include <linux/gpio.h>

#include <linux/interrupt.h>



#include <linux/regulator/machine.h>

#include <linux/i2c/twl.h>

#include <linux/mmc/host.h>



#include <asm/mach-types.h>

#include <asm/mach/arch.h>



#include <plat/board.h>

#include <plat/common.h>

#include <plat/gpmc.h>

#include <plat/usb.h>

#include <plat/onenand.h>



#include "mux.h"

#include "hsmmc.h"

#include "sdram-numonyx-m65kxxxxam.h"



#define IGEP3_GPIO_LED0_GREEN	54

#define IGEP3_GPIO_LED0_RED	53

#define IGEP3_GPIO_LED1_RED	16



#define IGEP3_GPIO_WIFI_NPD	138

#define IGEP3_GPIO_WIFI_NRESET	139

#define IGEP3_GPIO_BT_NRESET	137



#define IGEP3_GPIO_USBH_NRESET  115





#if defined(CONFIG_MTD_ONENAND_OMAP2) || \

	defined(CONFIG_MTD_ONENAND_OMAP2_MODULE)



#define ONENAND_MAP             0x20000000



/*

 * x2 Flash built-in COMBO POP MEMORY

 * Since the device is equipped with two DataRAMs, and two-plane NAND

 * Flash memory array, these two component enables simultaneous program

 * of 4KiB. Plane1 has only even blocks such as block0, block2, block4

 * while Plane2 has only odd blocks such as block1, block3, block5.

 * So MTD regards it as 4KiB page size and 256KiB block size 64*(2*2048)

 */



static struct mtd_partition igep3_onenand_partitions[] = {

	{

		.name           = "X-Loader",

		.offset         = 0,

		.size           = 2 * (64*(2*2048))

	},

	{

		.name           = "U-Boot",

		.offset         = MTDPART_OFS_APPEND,

		.size           = 6 * (64*(2*2048)),

	},

	{

		.name           = "Environment",

		.offset         = MTDPART_OFS_APPEND,

		.size           = 2 * (64*(2*2048)),

	},

	{

		.name           = "Kernel",

		.offset         = MTDPART_OFS_APPEND,

		.size           = 12 * (64*(2*2048)),

	},

	{

		.name           = "File System",

		.offset         = MTDPART_OFS_APPEND,

		.size           = MTDPART_SIZ_FULL,

	},

};



static struct omap_onenand_platform_data igep3_onenand_pdata = {

	.parts = igep3_onenand_partitions,

	.nr_parts = ARRAY_SIZE(igep3_onenand_partitions),

	.onenand_setup = NULL,

	.dma_channel	= -1,	/* disable DMA in OMAP OneNAND driver */

};



static struct platform_device igep3_onenand_device = {

	.name		= "omap2-onenand",

	.id		= -1,

	.dev = {

		.platform_data = &igep3_onenand_pdata,

	},

};



void __init igep3_flash_init(void)

{

	u8 cs = 0;

	u8 onenandcs = GPMC_CS_NUM + 1;



	for (cs = 0; cs < GPMC_CS_NUM; cs++) {

		u32 ret;

		ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1);



		/* Check if NAND/oneNAND is configured */

		if ((ret & 0xC00) == 0x800)

			/* NAND found */

			pr_err("IGEP3: Unsupported NAND found\n");

		else {

			ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG7);



			if ((ret & 0x3F) == (ONENAND_MAP >> 24))

				/* OneNAND found */

				onenandcs = cs;

		}

	}



	if (onenandcs > GPMC_CS_NUM) {

		pr_err("IGEP3: Unable to find configuration in GPMC\n");

		return;

	}



	igep3_onenand_pdata.cs = onenandcs;



	if (platform_device_register(&igep3_onenand_device) < 0)

		pr_err("IGEP3: Unable to register OneNAND device\n");

}



#else

void __init igep3_flash_init(void) {}

#endif



static struct regulator_consumer_supply igep3_vmmc1_supply = {

	.supply		= "vmmc",

};



/* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */

static struct regulator_init_data igep3_vmmc1 = {

	.constraints = {

		.min_uV			= 1850000,

		.max_uV			= 3150000,

		.valid_modes_mask	= REGULATOR_MODE_NORMAL

					| REGULATOR_MODE_STANDBY,

		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE

					| REGULATOR_CHANGE_MODE

					| REGULATOR_CHANGE_STATUS,

	},

	.num_consumer_supplies  = 1,

	.consumer_supplies      = &igep3_vmmc1_supply,

};



static struct omap2_hsmmc_info mmc[] = {

	[0] = {

		.mmc		= 1,

		.caps		= MMC_CAP_4_BIT_DATA,

		.gpio_cd	= -EINVAL,

		.gpio_wp	= -EINVAL,

	},

#if defined(CONFIG_LIBERTAS_SDIO) || defined(CONFIG_LIBERTAS_SDIO_MODULE)

	[1] = {

		.mmc		= 2,

		.caps		= MMC_CAP_4_BIT_DATA,

		.gpio_cd	= -EINVAL,

		.gpio_wp	= -EINVAL,

	},

#endif

	{}      /* Terminator */

};



#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)

#include <linux/leds.h>



static struct gpio_led igep3_gpio_leds[] = {

	[0] = {

		.name			= "gpio-led:red:d0",

		.gpio			= IGEP3_GPIO_LED0_RED,

		.default_trigger	= "default-off"

	},

	[1] = {

		.name			= "gpio-led:green:d0",

		.gpio			= IGEP3_GPIO_LED0_GREEN,

		.default_trigger	= "default-off",

	},

	[2] = {

		.name			= "gpio-led:red:d1",

		.gpio			= IGEP3_GPIO_LED1_RED,

		.default_trigger	= "default-off",

	},

	[3] = {

		.name			= "gpio-led:green:d1",

		.default_trigger	= "heartbeat",

		.gpio			= -EINVAL, /* gets replaced */

	},

};



static struct gpio_led_platform_data igep3_led_pdata = {

	.leds           = igep3_gpio_leds,

	.num_leds       = ARRAY_SIZE(igep3_gpio_leds),

};



static struct platform_device igep3_led_device = {

	 .name   = "leds-gpio",

	 .id     = -1,

	 .dev    = {

		 .platform_data = &igep3_led_pdata,

	},

};



static void __init igep3_leds_init(void)

{

	platform_device_register(&igep3_led_device);

}



#else

static inline void igep3_leds_init(void)

{

	if ((gpio_request(IGEP3_GPIO_LED0_RED, "gpio-led:red:d0") == 0) &&

	    (gpio_direction_output(IGEP3_GPIO_LED0_RED, 1) == 0)) {

		gpio_export(IGEP3_GPIO_LED0_RED, 0);

		gpio_set_value(IGEP3_GPIO_LED0_RED, 1);

	} else

		pr_warning("IGEP3: Could not obtain gpio GPIO_LED0_RED\n");



	if ((gpio_request(IGEP3_GPIO_LED0_GREEN, "gpio-led:green:d0") == 0) &&

	    (gpio_direction_output(IGEP3_GPIO_LED0_GREEN, 1) == 0)) {

		gpio_export(IGEP3_GPIO_LED0_GREEN, 0);

		gpio_set_value(IGEP3_GPIO_LED0_GREEN, 1);

	} else

		pr_warning("IGEP3: Could not obtain gpio GPIO_LED0_GREEN\n");



	if ((gpio_request(IGEP3_GPIO_LED1_RED, "gpio-led:red:d1") == 0) &&

		(gpio_direction_output(IGEP3_GPIO_LED1_RED, 1) == 0)) {

		gpio_export(IGEP3_GPIO_LED1_RED, 0);

		gpio_set_value(IGEP3_GPIO_LED1_RED, 1);

	} else

		pr_warning("IGEP3: Could not obtain gpio GPIO_LED1_RED\n");

}

#endif



static int igep3_twl4030_gpio_setup(struct device *dev,

		unsigned gpio, unsigned ngpio)

{

	/* gpio + 0 is "mmc0_cd" (input/IRQ) */

	mmc[0].gpio_cd = gpio + 0;

	omap2_hsmmc_init(mmc);



	/*

	 * link regulators to MMC adapters ... we "know" the

	 * regulators will be set up only *after* we return.

	 */

	igep3_vmmc1_supply.dev = mmc[0].dev;



	/* TWL4030_GPIO_MAX + 1 == ledB (out, active low LED) */

#if !defined(CONFIG_LEDS_GPIO) && !defined(CONFIG_LEDS_GPIO_MODULE)

	if ((gpio_request(gpio+TWL4030_GPIO_MAX+1, "gpio-led:green:d1") == 0)

	    && (gpio_direction_output(gpio + TWL4030_GPIO_MAX + 1, 1) == 0)) {

		gpio_export(gpio + TWL4030_GPIO_MAX + 1, 0);

		gpio_set_value(gpio + TWL4030_GPIO_MAX + 1, 0);

	} else

		pr_warning("IGEP3: Could not obtain gpio GPIO_LED1_GREEN\n");

#else

	igep3_gpio_leds[3].gpio = gpio + TWL4030_GPIO_MAX + 1;

#endif



	return 0;

};



static struct twl4030_gpio_platform_data igep3_twl4030_gpio_pdata = {

	.gpio_base	= OMAP_MAX_GPIO_LINES,

	.irq_base	= TWL4030_GPIO_IRQ_BASE,

	.irq_end	= TWL4030_GPIO_IRQ_END,

	.use_leds	= true,

	.setup		= igep3_twl4030_gpio_setup,

};



static struct twl4030_usb_data igep3_twl4030_usb_data = {

	.usb_mode	= T2_USB_MODE_ULPI,

};



static void __init igep3_init_irq(void)

{

	omap2_init_common_hw(m65kxxxxam_sdrc_params, m65kxxxxam_sdrc_params);

	omap_init_irq();

	omap_gpio_init();

}



static struct twl4030_platform_data igep3_twl4030_pdata = {

	.irq_base	= TWL4030_IRQ_BASE,

	.irq_end	= TWL4030_IRQ_END,



	/* platform_data for children goes here */

	.usb		= &igep3_twl4030_usb_data,

	.gpio		= &igep3_twl4030_gpio_pdata,

	.vmmc1		= &igep3_vmmc1,

};



static struct i2c_board_info __initdata igep3_i2c_boardinfo[] = {

	{

		I2C_BOARD_INFO("twl4030", 0x48),

		.flags		= I2C_CLIENT_WAKE,

		.irq		= INT_34XX_SYS_NIRQ,

		.platform_data	= &igep3_twl4030_pdata,

	},

};



static int __init igep3_i2c_init(void)

{

	omap_register_i2c_bus(1, 2600, igep3_i2c_boardinfo,

			ARRAY_SIZE(igep3_i2c_boardinfo));



	return 0;

}



static struct omap_musb_board_data musb_board_data = {

	.interface_type	= MUSB_INTERFACE_ULPI,

	.mode		= MUSB_OTG,

	.power		= 100,

};



#if defined(CONFIG_LIBERTAS_SDIO) || defined(CONFIG_LIBERTAS_SDIO_MODULE)



static void __init igep3_wifi_bt_init(void)

{

	/* Configure MUX values for W-LAN + Bluetooth GPIO's */

	omap_mux_init_gpio(IGEP3_GPIO_WIFI_NPD, OMAP_PIN_OUTPUT);

	omap_mux_init_gpio(IGEP3_GPIO_WIFI_NRESET, OMAP_PIN_OUTPUT);

	omap_mux_init_gpio(IGEP3_GPIO_BT_NRESET, OMAP_PIN_OUTPUT);



	/* Set GPIO's for  W-LAN + Bluetooth combo module */

	if ((gpio_request(IGEP3_GPIO_WIFI_NPD, "GPIO_WIFI_NPD") == 0) &&

	    (gpio_direction_output(IGEP3_GPIO_WIFI_NPD, 1) == 0)) {

		gpio_export(IGEP3_GPIO_WIFI_NPD, 0);

	} else

		pr_warning("IGEP3: Could not obtain gpio GPIO_WIFI_NPD\n");



	if ((gpio_request(IGEP3_GPIO_WIFI_NRESET, "GPIO_WIFI_NRESET") == 0) &&

	    (gpio_direction_output(IGEP3_GPIO_WIFI_NRESET, 1) == 0)) {

		gpio_export(IGEP3_GPIO_WIFI_NRESET, 0);

		gpio_set_value(IGEP3_GPIO_WIFI_NRESET, 0);

		udelay(10);

		gpio_set_value(IGEP3_GPIO_WIFI_NRESET, 1);

	} else

		pr_warning("IGEP3: Could not obtain gpio GPIO_WIFI_NRESET\n");



	if ((gpio_request(IGEP3_GPIO_BT_NRESET, "GPIO_BT_NRESET") == 0) &&

	    (gpio_direction_output(IGEP3_GPIO_BT_NRESET, 1) == 0)) {

		gpio_export(IGEP3_GPIO_BT_NRESET, 0);

	} else

		pr_warning("IGEP3: Could not obtain gpio GPIO_BT_NRESET\n");

}

#else

void __init igep3_wifi_bt_init(void) {}

#endif



#ifdef CONFIG_OMAP_MUX

static struct omap_board_mux board_mux[] __initdata = {

	{ .reg_offset = OMAP_MUX_TERMINATOR },

};

#else

#define board_mux	NULL

#endif



static void __init igep3_init(void)

{

	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);



	/* Register I2C busses and drivers */

	igep3_i2c_init();



	omap_serial_init();

	usb_musb_init(&musb_board_data);



	igep3_flash_init();

	igep3_leds_init();



	/*

	 * WLAN-BT combo module from MuRata wich has a Marvell WLAN

	 * (88W8686) + CSR Bluetooth chipset. Uses SDIO interface.

	 */

	igep3_wifi_bt_init();



}



MACHINE_START(IGEP0030, "IGEP OMAP3 module")

	.phys_io	= 0x48000000,

	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,

	.boot_params	= 0x80000100,

	.map_io		= omap3_map_io,

	.init_irq	= igep3_init_irq,

	.init_machine	= igep3_init,

	.timer		= &omap_timer,

MACHINE_END

arch/arm/plat-omap/include/plat/uncompress.h

+1 −0
Original line number Diff line number Diff line
@@ -146,6 +146,7 @@ static inline void __arch_decomp_setup(unsigned long arch_id) 
		DEBUG_LL_OMAP3(3, cm_t35);

		DEBUG_LL_OMAP3(3, cm_t3517);

		DEBUG_LL_OMAP3(3, igep0020);

		DEBUG_LL_OMAP3(3, igep0030);

		DEBUG_LL_OMAP3(3, nokia_rx51);

		DEBUG_LL_OMAP3(3, omap3517evm);

		DEBUG_LL_OMAP3(3, omap3_beagle);

CRA Git | Maintained and supported by SUSTech CRA and CCSE