Merge branch 'intel_idle+acpi'

		does not reflect it. Likewise, if one enables a deep state but a

		lighter state still is disabled, then this has no effect.

What:		/sys/devices/system/cpu/cpuX/cpuidle/stateN/default_status

Date:		December 2019

KernelVersion:	v5.6

Contact:	Linux power management list <linux-pm@vger.kernel.org>

Description:

		(RO) The default status of this state, "enabled" or "disabled".

What:		/sys/devices/system/cpu/cpuX/cpuidle/stateN/residency

Date:		March 2014

``disable``

	Whether or not this idle state is disabled.

``default_status``

	The default status of this state, "enabled" or "disabled".

``latency``

	Exit latency of the idle state in microseconds.

.. SPDX-License-Identifier: GPL-2.0

.. include:: <isonum.txt>

==============================================

``intel_idle`` CPU Idle Time Management Driver

==============================================

:Copyright: |copy| 2020 Intel Corporation

:Author: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

General Information

===================

``intel_idle`` is a part of the

:doc:`CPU idle time management subsystem <cpuidle>` in the Linux kernel

(``CPUIdle``).  It is the default CPU idle time management driver for the

Nehalem and later generations of Intel processors, but the level of support for

a particular processor model in it depends on whether or not it recognizes that

processor model and may also depend on information coming from the platform

firmware.  [To understand ``intel_idle`` it is necessary to know how ``CPUIdle``

works in general, so this is the time to get familiar with :doc:`cpuidle` if you

have not done that yet.]

``intel_idle`` uses the ``MWAIT`` instruction to inform the processor that the

logical CPU executing it is idle and so it may be possible to put some of the

processor's functional blocks into low-power states.  That instruction takes two

arguments (passed in the ``EAX`` and ``ECX`` registers of the target CPU), the

first of which, referred to as a *hint*, can be used by the processor to

determine what can be done (for details refer to Intel Software Developer’s

Manual [1]_).  Accordingly, ``intel_idle`` refuses to work with processors in

which the support for the ``MWAIT`` instruction has been disabled (for example,

via the platform firmware configuration menu) or which do not support that

instruction at all.

``intel_idle`` is not modular, so it cannot be unloaded, which means that the

only way to pass early-configuration-time parameters to it is via the kernel

command line.

.. _intel-idle-enumeration-of-states:

Enumeration of Idle States

==========================

Each ``MWAIT`` hint value is interpreted by the processor as a license to

reconfigure itself in a certain way in order to save energy.  The processor

configurations (with reduced power draw) resulting from that are referred to

as C-states (in the ACPI terminology) or idle states.  The list of meaningful

``MWAIT`` hint values and idle states (i.e. low-power configurations of the

processor) corresponding to them depends on the processor model and it may also

depend on the configuration of the platform.

In order to create a list of available idle states required by the ``CPUIdle``

subsystem (see :ref:`idle-states-representation` in :doc:`cpuidle`),

``intel_idle`` can use two sources of information: static tables of idle states

for different processor models included in the driver itself and the ACPI tables

of the system.  The former are always used if the processor model at hand is

recognized by ``intel_idle`` and the latter are used if that is required for

the given processor model (which is the case for all server processor models

recognized by ``intel_idle``) or if the processor model is not recognized.

If the ACPI tables are going to be used for building the list of available idle

states, ``intel_idle`` first looks for a ``_CST`` object under one of the ACPI

objects corresponding to the CPUs in the system (refer to the ACPI specification

[2]_ for the description of ``_CST`` and its output package).  Because the

``CPUIdle`` subsystem expects that the list of idle states supplied by the

driver will be suitable for all of the CPUs handled by it and ``intel_idle`` is

registered as the ``CPUIdle`` driver for all of the CPUs in the system, the

driver looks for the first ``_CST`` object returning at least one valid idle

state description and such that all of the idle states included in its return

package are of the FFH (Functional Fixed Hardware) type, which means that the

``MWAIT`` instruction is expected to be used to tell the processor that it can

enter one of them.  The return package of that ``_CST`` is then assumed to be

applicable to all of the other CPUs in the system and the idle state

descriptions extracted from it are stored in a preliminary list of idle states

coming from the ACPI tables.  [This step is skipped if ``intel_idle`` is

configured to ignore the ACPI tables; see `below <intel-idle-parameters_>`_.]

Next, the first (index 0) entry in the list of available idle states is

initialized to represent a "polling idle state" (a pseudo-idle state in which

the target CPU continuously fetches and executes instructions), and the

subsequent (real) idle state entries are populated as follows.

If the processor model at hand is recognized by ``intel_idle``, there is a

(static) table of idle state descriptions for it in the driver.  In that case,

the "internal" table is the primary source of information on idle states and the

information from it is copied to the final list of available idle states.  If

using the ACPI tables for the enumeration of idle states is not required

(depending on the processor model), all of the listed idle state are enabled by

default (so all of them will be taken into consideration by ``CPUIdle``

governors during CPU idle state selection).  Otherwise, some of the listed idle

states may not be enabled by default if there are no matching entries in the

preliminary list of idle states coming from the ACPI tables.  In that case user

space still can enable them later (on a per-CPU basis) with the help of

the ``disable`` idle state attribute in ``sysfs`` (see

:ref:`idle-states-representation` in :doc:`cpuidle`).  This basically means that

the idle states "known" to the driver may not be enabled by default if they have

not been exposed by the platform firmware (through the ACPI tables).

If the given processor model is not recognized by ``intel_idle``, but it

supports ``MWAIT``, the preliminary list of idle states coming from the ACPI

tables is used for building the final list that will be supplied to the

``CPUIdle`` core during driver registration.  For each idle state in that list,

the description, ``MWAIT`` hint and exit latency are copied to the corresponding

entry in the final list of idle states.  The name of the idle state represented

by it (to be returned by the ``name`` idle state attribute in ``sysfs``) is

"CX_ACPI", where X is the index of that idle state in the final list (note that

the minimum value of X is 1, because 0 is reserved for the "polling" state), and

its target residency is based on the exit latency value.  Specifically, for

C1-type idle states the exit latency value is also used as the target residency

(for compatibility with the majority of the "internal" tables of idle states for

various processor models recognized by ``intel_idle``) and for the other idle

state types (C2 and C3) the target residency value is 3 times the exit latency

(again, that is because it reflects the target residency to exit latency ratio

in the majority of cases for the processor models recognized by ``intel_idle``).

All of the idle states in the final list are enabled by default in this case.

.. _intel-idle-initialization:

Initialization

==============

The initialization of ``intel_idle`` starts with checking if the kernel command

line options forbid the use of the ``MWAIT`` instruction.  If that is the case,

an error code is returned right away.

The next step is to check whether or not the processor model is known to the

driver, which determines the idle states enumeration method (see

`above <intel-idle-enumeration-of-states_>`_), and whether or not the processor

supports ``MWAIT`` (the initialization fails if that is not the case).  Then,

the ``MWAIT`` support in the processor is enumerated through ``CPUID`` and the

driver initialization fails if the level of support is not as expected (for

example, if the total number of ``MWAIT`` substates returned is 0).

Next, if the driver is not configured to ignore the ACPI tables (see

`below <intel-idle-parameters_>`_), the idle states information provided by the

platform firmware is extracted from them.

Then, ``CPUIdle`` device objects are allocated for all CPUs and the list of

available idle states is created as explained

`above <intel-idle-enumeration-of-states_>`_.

Finally, ``intel_idle`` is registered with the help of cpuidle_register_driver()

as the ``CPUIdle`` driver for all CPUs in the system and a CPU online callback

for configuring individual CPUs is registered via cpuhp_setup_state(), which

(among other things) causes the callback routine to be invoked for all of the

CPUs present in the system at that time (each CPU executes its own instance of

the callback routine).  That routine registers a ``CPUIdle`` device for the CPU

running it (which enables the ``CPUIdle`` subsystem to operate that CPU) and

optionally performs some CPU-specific initialization actions that may be

required for the given processor model.

.. _intel-idle-parameters:

Kernel Command Line Options and Module Parameters

=================================================

The *x86* architecture support code recognizes three kernel command line

options related to CPU idle time management: ``idle=poll``, ``idle=halt``,

and ``idle=nomwait``.  If any of them is present in the kernel command line, the

``MWAIT`` instruction is not allowed to be used, so the initialization of

``intel_idle`` will fail.

Apart from that there are two module parameters recognized by ``intel_idle``

itself that can be set via the kernel command line (they cannot be updated via

sysfs, so that is the only way to change their values).

The ``max_cstate`` parameter value is the maximum idle state index in the list

of idle states supplied to the ``CPUIdle`` core during the registration of the

driver.  It is also the maximum number of regular (non-polling) idle states that

can be used by ``intel_idle``, so the enumeration of idle states is terminated

after finding that number of usable idle states (the other idle states that

potentially might have been used if ``max_cstate`` had been greater are not

taken into consideration at all).  Setting ``max_cstate`` can prevent

``intel_idle`` from exposing idle states that are regarded as "too deep" for

some reason to the ``CPUIdle`` core, but it does so by making them effectively

invisible until the system is shut down and started again which may not always

be desirable.  In practice, it is only really necessary to do that if the idle

states in question cannot be enabled during system startup, because in the

working state of the system the CPU power management quality of service (PM

QoS) feature can be used to prevent ``CPUIdle`` from touching those idle states

even if they have been enumerated (see :ref:`cpu-pm-qos` in :doc:`cpuidle`).

Setting ``max_cstate`` to 0 causes the ``intel_idle`` initialization to fail.

The ``noacpi`` module parameter (which is recognized by ``intel_idle`` if the

kernel has been configured with ACPI support), can be set to make the driver

ignore the system's ACPI tables entirely (it is unset by default).

.. _intel-idle-core-and-package-idle-states:

Core and Package Levels of Idle States

======================================

Typically, in a processor supporting the ``MWAIT`` instruction there are (at

least) two levels of idle states (or C-states).  One level, referred to as

"core C-states", covers individual cores in the processor, whereas the other

level, referred to as "package C-states", covers the entire processor package

and it may also involve other components of the system (GPUs, memory

controllers, I/O hubs etc.).

Some of the ``MWAIT`` hint values allow the processor to use core C-states only

(most importantly, that is the case for the ``MWAIT`` hint value corresponding

to the ``C1`` idle state), but the majority of them give it a license to put

the target core (i.e. the core containing the logical CPU executing ``MWAIT``

with the given hint value) into a specific core C-state and then (if possible)

to enter a specific package C-state at the deeper level.  For example, the

``MWAIT`` hint value representing the ``C3`` idle state allows the processor to

put the target core into the low-power state referred to as "core ``C3``" (or

``CC3``), which happens if all of the logical CPUs (SMT siblings) in that core

have executed ``MWAIT`` with the ``C3`` hint value (or with a hint value

representing a deeper idle state), and in addition to that (in the majority of

cases) it gives the processor a license to put the entire package (possibly

including some non-CPU components such as a GPU or a memory controller) into the

low-power state referred to as "package ``C3``" (or ``PC3``), which happens if

all of the cores have gone into the ``CC3`` state and (possibly) some additional

conditions are satisfied (for instance, if the GPU is covered by ``PC3``, it may

be required to be in a certain GPU-specific low-power state for ``PC3`` to be

reachable).

As a rule, there is no simple way to make the processor use core C-states only

if the conditions for entering the corresponding package C-states are met, so

the logical CPU executing ``MWAIT`` with a hint value that is not core-level

only (like for ``C1``) must always assume that this may cause the processor to

enter a package C-state.  [That is why the exit latency and target residency

values corresponding to the majority of ``MWAIT`` hint values in the "internal"

tables of idle states in ``intel_idle`` reflect the properties of package

C-states.]  If using package C-states is not desirable at all, either

:ref:`PM QoS <cpu-pm-qos>` or the ``max_cstate`` module parameter of

``intel_idle`` described `above <intel-idle-parameters_>`_ must be used to

restrict the range of permissible idle states to the ones with core-level only

``MWAIT`` hint values (like ``C1``).

References

==========

.. [1] *Intel® 64 and IA-32 Architectures Software Developer’s Manual Volume 2B*,

       https://www.intel.com/content/www/us/en/architecture-and-technology/64-ia-32-architectures-software-developer-vol-2b-manual.html

.. [2] *Advanced Configuration and Power Interface (ACPI) Specification*,

       https://uefi.org/specifications

   :maxdepth: 2

   cpuidle

   intel_idle

   cpufreq

   intel_pstate

   intel_epb

config ACPI_PROCESSOR_CSTATE

	def_bool y

	depends on ACPI_PROCESSOR

	depends on IA64 || X86

config ACPI_PROCESSOR_IDLE