Commit e5868a31 authored by Egbert Eich's avatar Egbert Eich Committed by Daniel Vetter
Browse files

DRM/i915: Convert HPD interrupts to make use of HPD pin assignment in encoders (v2) 



This allows to enable HPD interrupts for individual pins to only receive
hotplug events from lines which are connected and working.

v2: Restructured initailization of const arrays following a suggstion
    by Chris Wilson <chris@chris-wilson.co.uk>

Signed-off-by: default avatarEgbert Eich <eich@suse.de>
Acked-by: default avatarChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> (v1)
Signed-off-by: default avatarDaniel Vetter <daniel.vetter@ffwll.ch>
parent 1d843f9d

drivers/gpu/drm/i915/i915_irq.c

+94 −61
Original line number Diff line number Diff line
@@ -36,6 +36,59 @@ 
#include "i915_trace.h"

#include "intel_drv.h"



static const u32 hpd_ibx[] = {

	[HPD_CRT] = SDE_CRT_HOTPLUG,

	[HPD_SDVO_B] = SDE_SDVOB_HOTPLUG,

	[HPD_PORT_B] = SDE_PORTB_HOTPLUG,

	[HPD_PORT_C] = SDE_PORTC_HOTPLUG,

	[HPD_PORT_D] = SDE_PORTD_HOTPLUG

};



static const u32 hpd_cpt[] = {

	[HPD_CRT] = SDE_CRT_HOTPLUG_CPT,

	[HPD_PORT_B] = SDE_PORTB_HOTPLUG_CPT,

	[HPD_PORT_C] = SDE_PORTC_HOTPLUG_CPT,

	[HPD_PORT_D] = SDE_PORTD_HOTPLUG_CPT

};



static const u32 hpd_mask_i915[] = {

	[HPD_CRT] = CRT_HOTPLUG_INT_EN,

	[HPD_SDVO_B] = SDVOB_HOTPLUG_INT_EN,

	[HPD_SDVO_C] = SDVOC_HOTPLUG_INT_EN,

	[HPD_PORT_B] = PORTB_HOTPLUG_INT_EN,

	[HPD_PORT_C] = PORTC_HOTPLUG_INT_EN,

	[HPD_PORT_D] = PORTD_HOTPLUG_INT_EN

};



static const u32 hpd_status_gen4[] = {

	[HPD_CRT] = CRT_HOTPLUG_INT_STATUS,

	[HPD_SDVO_B] = SDVOB_HOTPLUG_INT_STATUS_G4X,

	[HPD_SDVO_C] = SDVOC_HOTPLUG_INT_STATUS_G4X,

	[HPD_PORT_B] = PORTB_HOTPLUG_INT_STATUS,

	[HPD_PORT_C] = PORTC_HOTPLUG_INT_STATUS,

	[HPD_PORT_D] = PORTD_HOTPLUG_INT_STATUS

};



static const u32 hpd_status_i965[] = {

	 [HPD_CRT] = CRT_HOTPLUG_INT_STATUS,

	 [HPD_SDVO_B] = SDVOB_HOTPLUG_INT_STATUS_I965,

	 [HPD_SDVO_C] = SDVOC_HOTPLUG_INT_STATUS_I965,

	 [HPD_PORT_B] = PORTB_HOTPLUG_INT_STATUS,

	 [HPD_PORT_C] = PORTC_HOTPLUG_INT_STATUS,

	 [HPD_PORT_D] = PORTD_HOTPLUG_INT_STATUS

};



static const u32 hpd_status_i915[] = { /* i915 and valleyview are the same */

	[HPD_CRT] = CRT_HOTPLUG_INT_STATUS,

	[HPD_SDVO_B] = SDVOB_HOTPLUG_INT_STATUS_I915,

	[HPD_SDVO_C] = SDVOC_HOTPLUG_INT_STATUS_I915,

	[HPD_PORT_B] = PORTB_HOTPLUG_INT_STATUS,

	[HPD_PORT_C] = PORTC_HOTPLUG_INT_STATUS,

	[HPD_PORT_D] = PORTD_HOTPLUG_INT_STATUS

};







/* For display hotplug interrupt */

static void

ironlake_enable_display_irq(drm_i915_private_t *dev_priv, u32 mask)
@@ -599,7 +652,7 @@ static irqreturn_t valleyview_irq_handler(int irq, void *arg) 


			DRM_DEBUG_DRIVER("hotplug event received, stat 0x%08x\n",

					 hotplug_status);

			if (hotplug_status & dev_priv->hotplug_supported_mask)

			if (hotplug_status & HOTPLUG_INT_STATUS_I915)

				queue_work(dev_priv->wq,

					   &dev_priv->hotplug_work);
@@ -2034,17 +2087,21 @@ static void ibx_enable_hotplug(struct drm_device *dev) 
static void ibx_irq_postinstall(struct drm_device *dev)

{

	drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;

	u32 mask;



	if (HAS_PCH_IBX(dev))

		mask = SDE_HOTPLUG_MASK |

		       SDE_GMBUS |

		       SDE_AUX_MASK;

	else

		mask = SDE_HOTPLUG_MASK_CPT |

		       SDE_GMBUS_CPT |

		       SDE_AUX_MASK_CPT;



	struct drm_mode_config *mode_config = &dev->mode_config;

	struct intel_encoder *intel_encoder;

	u32 mask = I915_READ(SDEIER);



	if (HAS_PCH_IBX(dev)) {

		mask &= ~SDE_HOTPLUG_MASK;

		list_for_each_entry(intel_encoder, &mode_config->encoder_list, base.head)

			mask |= hpd_ibx[intel_encoder->hpd_pin];

		mask |= SDE_GMBUS | SDE_AUX_MASK;

	} else {

		mask &= ~SDE_HOTPLUG_MASK_CPT;

		list_for_each_entry(intel_encoder, &mode_config->encoder_list, base.head)

			mask |= hpd_cpt[intel_encoder->hpd_pin];

		mask |= SDE_GMBUS_CPT | SDE_AUX_MASK_CPT;

	}

	I915_WRITE(SDEIIR, I915_READ(SDEIIR));

	I915_WRITE(SDEIMR, ~mask);

	I915_WRITE(SDEIER, mask);
@@ -2466,26 +2523,16 @@ static int i915_irq_postinstall(struct drm_device *dev) 


static void i915_hpd_irq_setup(struct drm_device *dev)

{

	if (I915_HAS_HOTPLUG(dev)) {

		drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;

	u32 hotplug_en;

		struct drm_mode_config *mode_config = &dev->mode_config;

		struct intel_encoder *encoder;

		u32 hotplug_en = I915_READ(PORT_HOTPLUG_EN);



	if (I915_HAS_HOTPLUG(dev)) {

		hotplug_en = I915_READ(PORT_HOTPLUG_EN);



		if (dev_priv->hotplug_supported_mask & PORTB_HOTPLUG_INT_STATUS)

			hotplug_en |= PORTB_HOTPLUG_INT_EN;

		if (dev_priv->hotplug_supported_mask & PORTC_HOTPLUG_INT_STATUS)

			hotplug_en |= PORTC_HOTPLUG_INT_EN;

		if (dev_priv->hotplug_supported_mask & PORTD_HOTPLUG_INT_STATUS)

			hotplug_en |= PORTD_HOTPLUG_INT_EN;

		if (dev_priv->hotplug_supported_mask & SDVOC_HOTPLUG_INT_STATUS_I915)

			hotplug_en |= SDVOC_HOTPLUG_INT_EN;

		if (dev_priv->hotplug_supported_mask & SDVOB_HOTPLUG_INT_STATUS_I915)

			hotplug_en |= SDVOB_HOTPLUG_INT_EN;

		if (dev_priv->hotplug_supported_mask & CRT_HOTPLUG_INT_STATUS) {

			hotplug_en |= CRT_HOTPLUG_INT_EN;

		hotplug_en &= ~HOTPLUG_INT_EN_MASK;

		list_for_each_entry(encoder, &mode_config->encoder_list, base.head)

			hotplug_en |= hpd_mask_i915[encoder->hpd_pin];

		hotplug_en |= CRT_HOTPLUG_VOLTAGE_COMPARE_50;

		}



		/* Ignore TV since it's buggy */
@@ -2576,7 +2623,7 @@ static irqreturn_t i915_irq_handler(int irq, void *arg) 


			DRM_DEBUG_DRIVER("hotplug event received, stat 0x%08x\n",

				  hotplug_status);

			if (hotplug_status & dev_priv->hotplug_supported_mask)

			if (hotplug_status & HOTPLUG_INT_STATUS_I915)

				queue_work(dev_priv->wq,

					   &dev_priv->hotplug_work);
@@ -2725,30 +2772,15 @@ static int i965_irq_postinstall(struct drm_device *dev) 
static void i965_hpd_irq_setup(struct drm_device *dev)

{

	drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;

	struct drm_mode_config *mode_config = &dev->mode_config;

	struct intel_encoder *encoder;

	u32 hotplug_en;



	/* Note HDMI and DP share hotplug bits */

	hotplug_en = 0;

	if (dev_priv->hotplug_supported_mask & PORTB_HOTPLUG_INT_STATUS)

		hotplug_en |= PORTB_HOTPLUG_INT_EN;

	if (dev_priv->hotplug_supported_mask & PORTC_HOTPLUG_INT_STATUS)

		hotplug_en |= PORTC_HOTPLUG_INT_EN;

	if (dev_priv->hotplug_supported_mask & PORTD_HOTPLUG_INT_STATUS)

		hotplug_en |= PORTD_HOTPLUG_INT_EN;

	if (IS_G4X(dev)) {

		if (dev_priv->hotplug_supported_mask & SDVOC_HOTPLUG_INT_STATUS_G4X)

			hotplug_en |= SDVOC_HOTPLUG_INT_EN;

		if (dev_priv->hotplug_supported_mask & SDVOB_HOTPLUG_INT_STATUS_G4X)

			hotplug_en |= SDVOB_HOTPLUG_INT_EN;

	} else {

		if (dev_priv->hotplug_supported_mask & SDVOC_HOTPLUG_INT_STATUS_I965)

			hotplug_en |= SDVOC_HOTPLUG_INT_EN;

		if (dev_priv->hotplug_supported_mask & SDVOB_HOTPLUG_INT_STATUS_I965)

			hotplug_en |= SDVOB_HOTPLUG_INT_EN;

	}

	if (dev_priv->hotplug_supported_mask & CRT_HOTPLUG_INT_STATUS) {

		hotplug_en |= CRT_HOTPLUG_INT_EN;



	list_for_each_entry(encoder, &mode_config->encoder_list, base.head)

		/* enable bits are the same for all generations */

		hotplug_en |= hpd_mask_i915[encoder->hpd_pin];

	/* Programming the CRT detection parameters tends

	   to generate a spurious hotplug event about three

	   seconds later.  So just do it once.
@@ -2756,7 +2788,6 @@ static void i965_hpd_irq_setup(struct drm_device *dev) 
	if (IS_G4X(dev))

		hotplug_en |= CRT_HOTPLUG_ACTIVATION_PERIOD_64;

	hotplug_en |= CRT_HOTPLUG_VOLTAGE_COMPARE_50;

	}



	/* Ignore TV since it's buggy */
@@ -2822,7 +2853,9 @@ static irqreturn_t i965_irq_handler(int irq, void *arg) 


			DRM_DEBUG_DRIVER("hotplug event received, stat 0x%08x\n",

				  hotplug_status);

			if (hotplug_status & dev_priv->hotplug_supported_mask)

			if (hotplug_status & (IS_G4X(dev) ?

					      HOTPLUG_INT_STATUS_G4X :

					      HOTPLUG_INT_STATUS_I965))

				queue_work(dev_priv->wq,

					   &dev_priv->hotplug_work);

drivers/gpu/drm/i915/i915_reg.h

+31 −1
Original line number Diff line number Diff line
@@ -1642,6 +1642,12 @@ 
#define   SDVOC_HOTPLUG_INT_EN			(1 << 25)

#define   TV_HOTPLUG_INT_EN			(1 << 18)

#define   CRT_HOTPLUG_INT_EN			(1 << 9)

#define HOTPLUG_INT_EN_MASK			(PORTB_HOTPLUG_INT_EN | \

						 PORTC_HOTPLUG_INT_EN | \

						 PORTD_HOTPLUG_INT_EN | \

						 SDVOC_HOTPLUG_INT_EN | \

						 SDVOB_HOTPLUG_INT_EN | \

						 CRT_HOTPLUG_INT_EN)

#define   CRT_HOTPLUG_FORCE_DETECT		(1 << 3)

#define CRT_HOTPLUG_ACTIVATION_PERIOD_32	(0 << 8)

/* must use period 64 on GM45 according to docs */
@@ -1680,6 +1686,26 @@ 
#define   SDVOB_HOTPLUG_INT_STATUS_I965		(3 << 2)

#define   SDVOC_HOTPLUG_INT_STATUS_I915		(1 << 7)

#define   SDVOB_HOTPLUG_INT_STATUS_I915		(1 << 6)

#define   HOTPLUG_INT_STATUS_G4X		(CRT_HOTPLUG_INT_STATUS | \

						 SDVOB_HOTPLUG_INT_STATUS_G4X | \

						 SDVOC_HOTPLUG_INT_STATUS_G4X | \

						 PORTB_HOTPLUG_INT_STATUS | \

						 PORTC_HOTPLUG_INT_STATUS | \

						 PORTD_HOTPLUG_INT_STATUS)



#define HOTPLUG_INT_STATUS_I965			(CRT_HOTPLUG_INT_STATUS | \

						 SDVOB_HOTPLUG_INT_STATUS_I965 | \

						 SDVOC_HOTPLUG_INT_STATUS_I965 | \

						 PORTB_HOTPLUG_INT_STATUS | \

						 PORTC_HOTPLUG_INT_STATUS | \

						 PORTD_HOTPLUG_INT_STATUS)



#define HOTPLUG_INT_STATUS_I915			(CRT_HOTPLUG_INT_STATUS | \

						 SDVOB_HOTPLUG_INT_STATUS_I915 | \

						 SDVOC_HOTPLUG_INT_STATUS_I915 | \

						 PORTB_HOTPLUG_INT_STATUS | \

						 PORTC_HOTPLUG_INT_STATUS | \

						 PORTD_HOTPLUG_INT_STATUS)



/* SDVO and HDMI port control.

 * The same register may be used for SDVO or HDMI */
@@ -3536,7 +3562,11 @@ 
#define SDE_PORTC_HOTPLUG       (1 << 9)

#define SDE_PORTB_HOTPLUG       (1 << 8)

#define SDE_SDVOB_HOTPLUG       (1 << 6)

#define SDE_HOTPLUG_MASK	(0xf << 8)

#define SDE_HOTPLUG_MASK        (SDE_CRT_HOTPLUG | \

				 SDE_SDVOB_HOTPLUG |	\

				 SDE_PORTB_HOTPLUG |	\

				 SDE_PORTC_HOTPLUG |	\

				 SDE_PORTD_HOTPLUG)

#define SDE_TRANSB_CRC_DONE	(1 << 5)

#define SDE_TRANSB_CRC_ERR	(1 << 4)

#define SDE_TRANSB_FIFO_UNDER	(1 << 3)

CRA Git | Maintained and supported by SUSTech CRA and CCSE