Commit e4ac58af authored by Ralf Baechle's avatar Ralf Baechle
Browse files

[MIPS] Rewrite all the assembler interrupt handlers to C. 



Saves like 1,600 lines of code, is way easier to debug, compilers
frequently do a better job than the cut and paste type of handlers many
boards had.  And finally having all the stuff done in a single place
also means alot of bug potencial for the MT ASE is gone.

The only surviving handler in assembler is the DECstation one; I hope
Maciej will rewrite it.

Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
parent d35d473c

arch/mips/au1000/common/Makefile

+1 −1
Original line number Diff line number Diff line
@@ -6,7 +6,7 @@ 
# Makefile for the Alchemy Au1000 CPU, generic files.

#



obj-y += prom.o int-handler.o irq.o puts.o time.o reset.o \

obj-y += prom.o irq.o puts.o time.o reset.o \

	au1xxx_irqmap.o clocks.o platform.o power.o setup.o \

	sleeper.o cputable.o dma.o dbdma.o gpio.o

arch/mips/au1000/common/int-handler.S

deleted100644 → 0
+0 −69
Original line number Diff line number Diff line 
/*

 * Copyright 2001 MontaVista Software Inc.

 * Author: ppopov@mvista.com

 *

 * Interrupt dispatcher for Au1000 boards.

 *

 * This program is free software; you can redistribute	it and/or modify it

 * under  the terms of	the GNU General	 Public License as published by the

 * Free Software Foundation;  either version 2 of the  License, or (at your

 * option) any later version.

 */

#include <asm/asm.h>

#include <asm/mipsregs.h>

#include <asm/addrspace.h>

#include <asm/regdef.h>

#include <asm/stackframe.h>



	.text

	.set	macro

	.set	noat

	.align	5



NESTED(au1000_IRQ, PT_SIZE, sp)

	SAVE_ALL

	CLI				# Important: mark KERNEL mode !



	mfc0	t0,CP0_CAUSE		# get pending interrupts

	mfc0	t1,CP0_STATUS		# get enabled interrupts

	and	t0,t1			# isolate allowed ones



	andi	t0,0xff00		# isolate pending bits

	beqz	t0, 3f			# spurious interrupt



	andi	a0, t0, CAUSEF_IP7

	beq	a0, zero, 1f

	move	a0, sp

	jal	mips_timer_interrupt

	j	ret_from_irq



1:

	andi	a0, t0, CAUSEF_IP2	# Interrupt Controller 0, Request 0

	beq	a0, zero, 2f

	move	a0,sp

	jal	intc0_req0_irqdispatch

	j	ret_from_irq

2:

	andi	a0, t0, CAUSEF_IP3	# Interrupt Controller 0, Request 1

	beq	a0, zero, 3f

	move	a0,sp

	jal	intc0_req1_irqdispatch

	j	ret_from_irq

3:

	andi	a0, t0, CAUSEF_IP4	# Interrupt Controller 1, Request 0

	beq	a0, zero, 4f

	move	a0,sp

	jal	intc1_req0_irqdispatch

	j	ret_from_irq

4:

	andi	a0, t0, CAUSEF_IP5	# Interrupt Controller 1, Request 1

	beq	a0, zero, 5f

	move	a0, sp

	jal	intc1_req1_irqdispatch

	j	ret_from_irq



5:

	move	a0, sp

	jal	spurious_interrupt

	j	ret_from_irq

END(au1000_IRQ)

arch/mips/au1000/common/irq.c

+18 −2
Original line number Diff line number Diff line
@@ -66,7 +66,6 @@ 
#define EXT_INTC1_REQ1 5 /* IP 5 */

#define MIPS_TIMER_IP  7 /* IP 7 */



extern asmlinkage void au1000_IRQ(void);

extern void set_debug_traps(void);

extern irq_cpustat_t irq_stat [NR_CPUS];
@@ -446,7 +445,6 @@ void __init arch_init_irq(void) 
	extern int au1xxx_ic0_nr_irqs;



	cp0_status = read_c0_status();

	set_except_vector(0, au1000_IRQ);



	/* Initialize interrupt controllers to a safe state.

	*/
@@ -661,3 +659,21 @@ restore_au1xxx_intctl(void) 
	au_writel(sleep_intctl_mask[0], IC0_MASKSET); au_sync();

}

#endif /* CONFIG_PM */



asmlinkage void plat_irq_dispatch(struct pt_regs *regs)

{

	unsigned int pending = read_c0_status() & read_c0_cause() & ST0_IM;



	if (pending & CAUSEF_IP7)

		mips_timer_interrupt(regs);

	else if (pending & CAUSEF_IP2)

		intc0_req0_irqdispatch(regs);

	else if (pending & CAUSEF_IP3)

		intc0_req1_irqdispatch(regs);

	else if (pending & CAUSEF_IP4)

		intc1_req0_irqdispatch(regs);

	else if (pending  & CAUSEF_IP5)

		intc1_req1_irqdispatch(regs);

	else

		spurious_interrupt(regs);

}

arch/mips/cobalt/Makefile

+1 −1
Original line number Diff line number Diff line
@@ -2,7 +2,7 @@ 
# Makefile for the Cobalt micro systems family specific parts of the kernel

#



obj-y	 := irq.o int-handler.o reset.o setup.o

obj-y	 := irq.o reset.o setup.o



obj-$(CONFIG_EARLY_PRINTK)	+= console.o

arch/mips/cobalt/int-handler.S

deleted100644 → 0
+0 −25
Original line number Diff line number Diff line 
/*

 * This file is subject to the terms and conditions of the GNU General Public

 * License.  See the file "COPYING" in the main directory of this archive

 * for more details.

 *

 * Copyright (C) 1995, 1996, 1997, 2003 by Ralf Baechle

 * Copyright (C) 2001, 2002, 2003 by Liam Davies (ldavies@agile.tv)

 */

#include <asm/asm.h>

#include <asm/mipsregs.h>

#include <asm/mach-cobalt/cobalt.h>

#include <asm/regdef.h>

#include <asm/stackframe.h>



		.text

		.align	5

		NESTED(cobalt_handle_int, PT_SIZE, sp)

		SAVE_ALL

		CLI



		PTR_LA	ra, ret_from_irq

		move	a0, sp

		j	cobalt_irq



		END(cobalt_handle_int)

CRA Git | Maintained and supported by SUSTech CRA and CCSE