Commit e427fe04 authored by Shane Huang's avatar Shane Huang Committed by Jeff Garzik
Browse files

[libata] ahci: Withdraw IGN_SERR_INTERNAL for SB800 SATA 



There is an issue in ATI SB600/SB700 SATA that PxSERR.E should not be
set on some conditions, which will lead to many SATA ODD error messages.
commit 55a61604 is the workaround.
Since SB800 fixed this HW issue, IGN_SERR_INTERNAL should be withdrawn
for SB800.

Signed-off-by: default avatarShane Huang <shane.huang@amd.com>
Signed-off-by: default avatarJeff Garzik <jgarzik@redhat.com>
parent 6ecb6f25

drivers/ata/ahci.c

+6 −2
Original line number Diff line number Diff line
@@ -105,7 +105,7 @@ enum { 
	board_ahci_ign_iferr	= 2,

	board_ahci_sb600	= 3,

	board_ahci_mv		= 4,

	board_ahci_sb700	= 5,

	board_ahci_sb700	= 5, /* for SB700 and SB800 */

	board_ahci_mcp65	= 6,

	board_ahci_nopmp	= 7,
@@ -439,7 +439,7 @@ static const struct ata_port_info ahci_port_info[] = { 
		.udma_mask	= ATA_UDMA6,

		.port_ops	= &ahci_ops,

	},

	/* board_ahci_sb700 */

	/* board_ahci_sb700, for SB700 and SB800 */

	{

		AHCI_HFLAGS	(AHCI_HFLAG_IGN_SERR_INTERNAL),

		.flags		= AHCI_FLAG_COMMON,
@@ -2612,6 +2612,10 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) 
	    (pdev->revision == 0xa1 || pdev->revision == 0xa2))

		hpriv->flags |= AHCI_HFLAG_NO_MSI;



	/* SB800 does NOT need the workaround to ignore SERR_INTERNAL */

	if (board_id == board_ahci_sb700 && pdev->revision >= 0x40)

		hpriv->flags &= ~AHCI_HFLAG_IGN_SERR_INTERNAL;



	if ((hpriv->flags & AHCI_HFLAG_NO_MSI) || pci_enable_msi(pdev))

		pci_intx(pdev, 1);

CRA Git | Maintained and supported by SUSTech CRA and CCSE