Commit e3c06cd0 authored by Christoph Fritz's avatar Christoph Fritz Committed by Bjorn Helgaas
Browse files

PCI: imx6: Add initial imx6sx support 



Add initial PCIe support for the imx6 SoC derivate imx6sx.  PCI MSI support
is untested as the necessary suspend/resume quirk is not included in this
patch.

This patch is heavily based on patches by Richard Zhu.

[bhelgaas: factor out refclk enable, fix adjacent typos in imx6q-pcie.txt]
Signed-off-by: default avatarChristoph Fritz <chf.fritz@googlemail.com>
Acked-by: default avatarRichard Zhu <Richard.Zhu@freescale.com>
Acked-by: default avatarLucas Stach <l.stach@pengutronix.de>
parent 4d1821e7

Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt

+6 −2
Original line number Diff line number Diff line
@@ -4,8 +4,8 @@ This PCIe host controller is based on the Synopsis Designware PCIe IP 
and thus inherits all the common properties defined in designware-pcie.txt.



Required properties:

- compatible: "fsl,imx6q-pcie"

- reg: base addresse and length of the pcie controller

- compatible: "fsl,imx6q-pcie", "fsl,imx6sx-pcie"

- reg: base address and length of the PCIe controller

- interrupts: A list of interrupt outputs of the controller. Must contain an

  entry for each entry in the interrupt-names property.

- interrupt-names: Must include the following entries:
@@ -20,6 +20,10 @@ Optional properties: 
- fsl,tx-swing-full: Gen2 TX SWING FULL value. Default: 127

- fsl,tx-swing-low: TX launch amplitude swing_low value. Default: 127



Additional required properties for imx6sx-pcie:

- clock names: Must include the following additional entries:

	- "pcie_inbound_axi"



Example:



	pcie@0x01000000 {

drivers/pci/host/pci-imx6.c

+53 −0
Original line number Diff line number Diff line
@@ -35,9 +35,11 @@ struct imx6_pcie { 
	int			reset_gpio;

	struct clk		*pcie_bus;

	struct clk		*pcie_phy;

	struct clk		*pcie_inbound_axi;

	struct clk		*pcie;

	struct pcie_port	pp;

	struct regmap		*iomuxc_gpr;

	bool			is_imx6sx;

	void __iomem		*mem_base;

	u32			tx_deemph_gen1;

	u32			tx_deemph_gen2_3p5db;
@@ -236,6 +238,17 @@ static int imx6_pcie_assert_core_reset(struct pcie_port *pp) 
	struct imx6_pcie *imx6_pcie = to_imx6_pcie(pp);

	u32 val, gpr1, gpr12;



	if (imx6_pcie->is_imx6sx) {

		regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,

				   IMX6SX_GPR12_PCIE_TEST_POWERDOWN,

				   IMX6SX_GPR12_PCIE_TEST_POWERDOWN);

		/* Force PCIe PHY reset */

		regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR5,

				   IMX6SX_GPR5_PCIE_BTNRST_RESET,

				   IMX6SX_GPR5_PCIE_BTNRST_RESET);

		return 0;

	}



	/*

	 * If the bootloader already enabled the link we need some special

	 * handling to get the core back into a state where it is safe to
@@ -271,6 +284,21 @@ static int imx6_pcie_assert_core_reset(struct pcie_port *pp) 


static int imx6_pcie_enable_ref_clk(struct imx6_pcie *imx6_pcie)

{

	struct pcie_port *pp = &imx6_pcie->pp;

	int ret;



	if (imx6_pcie->is_imx6sx) {

		ret = clk_prepare_enable(imx6_pcie->pcie_inbound_axi);

		if (ret) {

			dev_err(pp->dev, "unable to enable pcie_axi clock\n");

			return ret;

		}



		regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,

				   IMX6SX_GPR12_PCIE_TEST_POWERDOWN, 0);

		return ret;

	}



	/* power up core phy and enable ref clock */

	regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1,

			IMX6Q_GPR1_PCIE_TEST_PD, 0 << 18);
@@ -324,6 +352,11 @@ static int imx6_pcie_deassert_core_reset(struct pcie_port *pp) 
		msleep(100);

		gpio_set_value_cansleep(imx6_pcie->reset_gpio, 1);

	}



	if (imx6_pcie->is_imx6sx)

		regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR5,

				   IMX6SX_GPR5_PCIE_BTNRST_RESET, 0);



	return 0;



err_ref_clk:
@@ -341,6 +374,12 @@ static void imx6_pcie_init_phy(struct pcie_port *pp) 
{

	struct imx6_pcie *imx6_pcie = to_imx6_pcie(pp);



	if (imx6_pcie->is_imx6sx) {

		regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,

				   IMX6SX_GPR12_PCIE_RX_EQ_MASK,

				   IMX6SX_GPR12_PCIE_RX_EQ_2);

	}



	regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,

			IMX6Q_GPR12_PCIE_CTL_2, 0 << 10);
@@ -547,6 +586,9 @@ static int __init imx6_pcie_probe(struct platform_device *pdev) 
	pp = &imx6_pcie->pp;

	pp->dev = &pdev->dev;



	imx6_pcie->is_imx6sx = of_device_is_compatible(pp->dev->of_node,

						       "fsl,imx6sx-pcie");



	/* Added for PCI abort handling */

	hook_fault_code(16 + 6, imx6q_pcie_abort_handler, SIGBUS, 0,

		"imprecise external abort");
@@ -589,6 +631,16 @@ static int __init imx6_pcie_probe(struct platform_device *pdev) 
		return PTR_ERR(imx6_pcie->pcie);

	}



	if (imx6_pcie->is_imx6sx) {

		imx6_pcie->pcie_inbound_axi = devm_clk_get(&pdev->dev,

							   "pcie_inbound_axi");

		if (IS_ERR(imx6_pcie->pcie_inbound_axi)) {

			dev_err(&pdev->dev,

				"pcie_incbound_axi clock missing or invalid\n");

			return PTR_ERR(imx6_pcie->pcie_inbound_axi);

		}

	}



	/* Grab GPR config register range */

	imx6_pcie->iomuxc_gpr =

		 syscon_regmap_lookup_by_compatible("fsl,imx6q-iomuxc-gpr");
@@ -636,6 +688,7 @@ static void imx6_pcie_shutdown(struct platform_device *pdev) 


static const struct of_device_id imx6_pcie_of_match[] = {

	{ .compatible = "fsl,imx6q-pcie", },

	{ .compatible = "fsl,imx6sx-pcie", },

	{},

};

MODULE_DEVICE_TABLE(of, imx6_pcie_of_match);

CRA Git | Maintained and supported by SUSTech CRA and CCSE