ARM: tegra: add DT nodes for Tegra USB PHY (e374b65c) · Commits · 戴 / test

Documentation/devicetree/bindings/usb/nvidia,tegra20-ehci.txt

+1 −0

Original line number	Diff line number	Diff line
		@@ -11,6 +11,7 @@ Required properties :
		- phy_type : Should be one of "ulpi" or "utmi".
		- nvidia,vbus-gpio : If present, specifies a gpio that needs to be
		activated for the bus to be powered.
		- nvidia,phy : phandle of the PHY instance, the controller is connected to.

		Required properties for phy_type == ulpi:
		- nvidia,phy-reset-gpio : The GPIO used to reset the PHY.

0 → 100644

+14 −0

Original line number	Diff line number	Diff line
		Tegra SOC USB PHY

		The device node for Tegra SOC USB PHY:

		Required properties :
		- compatible : Should be "nvidia,tegra20-usb-phy".
		- reg : Address and length of the register set for the USB PHY interface.
		- phy_type : Should be one of "ulpi" or "utmi".

		Optional properties:
		- nvidia,has-legacy-mode : boolean indicates whether this controller can
		operate in legacy mode (as APX 2500 / 2600). In legacy mode some
		registers are accessed through the APB_MISC base address instead of
		the USB controller.
		No newline at end of file

+22 −0

Original line number	Diff line number	Diff line
		@@ -400,6 +400,25 @@
		#size-cells = <0>;
		};

		phy1: usb-phy@c5000400 {
		compatible = "nvidia,tegra20-usb-phy";
		reg = <0xc5000400 0x3c00>;
		phy_type = "utmi";
		nvidia,has-legacy-mode;
		};

		phy2: usb-phy@c5004400 {
		compatible = "nvidia,tegra20-usb-phy";
		reg = <0xc5004400 0x3c00>;
		phy_type = "ulpi";
		};

		phy3: usb-phy@c5008400 {
		compatible = "nvidia,tegra20-usb-phy";
		reg = <0xc5008400 0x3C00>;
		phy_type = "utmi";
		};

		usb@c5000000 {
		compatible = "nvidia,tegra20-ehci", "usb-ehci";
		reg = <0xc5000000 0x4000>;
		@@ -408,6 +427,7 @@
		nvidia,has-legacy-mode;
		clocks = <&tegra_car 22>;
		nvidia,needs-double-reset;
		nvidia,phy = <&phy1>;
		status = "disabled";
		};

		@@ -417,6 +437,7 @@
		interrupts = <0 21 0x04>;
		phy_type = "ulpi";
		clocks = <&tegra_car 58>;
		nvidia,phy = <&phy2>;
		status = "disabled";
		};

		@@ -426,6 +447,7 @@
		interrupts = <0 97 0x04>;
		phy_type = "utmi";
		clocks = <&tegra_car 59>;
		nvidia,phy = <&phy3>;
		status = "disabled";
		};