ARM: dts: imx53-smd: Add OV5642 video capture support (e2c16156) · Commits · 戴 / test

arch/arm/boot/dts/imx53-smd.dts

+73 −0

Original line number	Diff line number	Diff line
		@@ -185,6 +185,31 @@
		>;
		};

		pinctrl_ipu_csi0: ipucsi0grp {
		fsl,pins = <
		MX53_PAD_CSI0_DAT12__IPU_CSI0_D_12 0x1c4
		MX53_PAD_CSI0_DAT13__IPU_CSI0_D_13 0x1c4
		MX53_PAD_CSI0_DAT14__IPU_CSI0_D_14 0x1c4
		MX53_PAD_CSI0_DAT15__IPU_CSI0_D_15 0x1c4
		MX53_PAD_CSI0_DAT16__IPU_CSI0_D_16 0x1c4
		MX53_PAD_CSI0_DAT17__IPU_CSI0_D_17 0x1c4
		MX53_PAD_CSI0_DAT18__IPU_CSI0_D_18 0x1c4
		MX53_PAD_CSI0_DAT19__IPU_CSI0_D_19 0x1c4
		MX53_PAD_CSI0_PIXCLK__IPU_CSI0_PIXCLK 0x1e4
		MX53_PAD_CSI0_VSYNC__IPU_CSI0_VSYNC 0x1e4
		MX53_PAD_CSI0_MCLK__IPU_CSI0_HSYNC 0x1e4
		MX53_PAD_CSI0_DATA_EN__IPU_CSI0_DATA_EN 0x1e4
		>;
		};

		pinctrl_ov5642: ov5642grp {
		fsl,pins = <
		MX53_PAD_NANDF_WP_B__GPIO6_9 0x1e4
		MX53_PAD_NANDF_RB0__GPIO6_10 0x1e4
		MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK 0x1c4
		>;
		};

		pinctrl_uart1: uart1grp {
		fsl,pins = <
		MX53_PAD_CSI0_DAT10__UART1_TXD_MUX 0x1e4
		@@ -256,11 +281,47 @@
		camera: ov5642@3c {
		compatible = "ovti,ov5642";
		reg = <0x3c>;
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_ov5642>;
		assigned-clocks = <&clks IMX5_CLK_SSI_EXT1_SEL>,
		<&clks IMX5_CLK_SSI_EXT1_COM_SEL>;
		assigned-clock-parents = <&clks IMX5_CLK_PLL2_SW>,
		<&clks IMX5_CLK_SSI_EXT1_PODF>;
		assigned-clock-rates = <0>, <24000000>;
		clocks = <&clks IMX5_CLK_SSI_EXT1_GATE>;
		clock-names = "xclk";
		DVDD-supply = <&ldo9_reg>;
		AVDD-supply = <&ldo7_reg>;
		reset-gpios = <&gpio6 9 GPIO_ACTIVE_LOW>;
		powerdown-gpios = <&gpio6 10 GPIO_ACTIVE_HIGH>;

		port {
		ov5642_to_ipu_csi0: endpoint {
		remote-endpoint = <&ipu_csi0_from_parallel_sensor>;
		bus-width = <8>;
		hsync-active = <1>;
		vsync-active = <1>;
		};
		};
		};

		pmic: dialog@48 {
		compatible = "dlg,da9053", "dlg,da9052";
		reg = <0x48>;
		interrupt-parent = <&gpio7>;
		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;

		regulators {
		ldo7_reg: ldo7 {
		regulator-min-microvolt = <1200000>;
		regulator-max-microvolt = <3600000>;
		};

		ldo9_reg: ldo9 {
		regulator-min-microvolt = <1250000>;
		regulator-max-microvolt = <3650000>;
		};
		};
		};
		};

		@@ -271,3 +332,15 @@
		phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
		status = "okay";
		};

		&ipu_csi0_from_parallel_sensor {
		remote-endpoint = <&ov5642_to_ipu_csi0>;
		data-shift = <12>; /* Lines 19:12 used */
		hsync-active = <1>;
		vsync-active = <1>;
		};

		&ipu_csi0 {
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_ipu_csi0>;
		};

Admin message