Commit e279b6c1 authored by Sam Ravnborg's avatar Sam Ravnborg
Browse files

x86: start unification of arch/x86/Kconfig.* 



This step introduces the file arch/x86/Kconfig
which contains all the menu's from "Power Management"
and below.

The main part of the new Kconfig file is shared
and the remaining i386/x86_64 specific symbols
are covered by dependencies.

A x86_64 allmodconfig build did not show any differences.

Signed-off-by: default avatarSam Ravnborg <sam@ravnborg.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
parent e8ef9522

arch/x86/Kconfig

0 → 100644
+401 −0
Original line number Diff line number Diff line 
menu "Power management options"

	depends on !X86_VOYAGER



config ARCH_HIBERNATION_HEADER

	bool

	depends on X86_64 && HIBERNATION

	default y



source "kernel/power/Kconfig"



source "drivers/acpi/Kconfig"



menuconfig APM

	tristate "APM (Advanced Power Management) BIOS support"

	depends on X86_32 && PM_SLEEP && !X86_VISWS

	---help---

	  APM is a BIOS specification for saving power using several different

	  techniques. This is mostly useful for battery powered laptops with

	  APM compliant BIOSes. If you say Y here, the system time will be

	  reset after a RESUME operation, the /proc/apm device will provide

	  battery status information, and user-space programs will receive

	  notification of APM "events" (e.g. battery status change).



	  If you select "Y" here, you can disable actual use of the APM

	  BIOS by passing the "apm=off" option to the kernel at boot time.



	  Note that the APM support is almost completely disabled for

	  machines with more than one CPU.



	  In order to use APM, you will need supporting software. For location

	  and more information, read <file:Documentation/pm.txt> and the

	  Battery Powered Linux mini-HOWTO, available from

	  <http://www.tldp.org/docs.html#howto>.



	  This driver does not spin down disk drives (see the hdparm(8)

	  manpage ("man 8 hdparm") for that), and it doesn't turn off

	  VESA-compliant "green" monitors.



	  This driver does not support the TI 4000M TravelMate and the ACER

	  486/DX4/75 because they don't have compliant BIOSes. Many "green"

	  desktop machines also don't have compliant BIOSes, and this driver

	  may cause those machines to panic during the boot phase.



	  Generally, if you don't have a battery in your machine, there isn't

	  much point in using this driver and you should say N. If you get

	  random kernel OOPSes or reboots that don't seem to be related to

	  anything, try disabling/enabling this option (or disabling/enabling

	  APM in your BIOS).



	  Some other things you should try when experiencing seemingly random,

	  "weird" problems:



	  1) make sure that you have enough swap space and that it is

	  enabled.

	  2) pass the "no-hlt" option to the kernel

	  3) switch on floating point emulation in the kernel and pass

	  the "no387" option to the kernel

	  4) pass the "floppy=nodma" option to the kernel

	  5) pass the "mem=4M" option to the kernel (thereby disabling

	  all but the first 4 MB of RAM)

	  6) make sure that the CPU is not over clocked.

	  7) read the sig11 FAQ at <http://www.bitwizard.nl/sig11/>

	  8) disable the cache from your BIOS settings

	  9) install a fan for the video card or exchange video RAM

	  10) install a better fan for the CPU

	  11) exchange RAM chips

	  12) exchange the motherboard.



	  To compile this driver as a module, choose M here: the

	  module will be called apm.



if APM



config APM_IGNORE_USER_SUSPEND

	bool "Ignore USER SUSPEND"

	help

	  This option will ignore USER SUSPEND requests. On machines with a

	  compliant APM BIOS, you want to say N. However, on the NEC Versa M

	  series notebooks, it is necessary to say Y because of a BIOS bug.



config APM_DO_ENABLE

	bool "Enable PM at boot time"

	---help---

	  Enable APM features at boot time. From page 36 of the APM BIOS

	  specification: "When disabled, the APM BIOS does not automatically

	  power manage devices, enter the Standby State, enter the Suspend

	  State, or take power saving steps in response to CPU Idle calls."

	  This driver will make CPU Idle calls when Linux is idle (unless this

	  feature is turned off -- see "Do CPU IDLE calls", below). This

	  should always save battery power, but more complicated APM features

	  will be dependent on your BIOS implementation. You may need to turn

	  this option off if your computer hangs at boot time when using APM

	  support, or if it beeps continuously instead of suspending. Turn

	  this off if you have a NEC UltraLite Versa 33/C or a Toshiba

	  T400CDT. This is off by default since most machines do fine without

	  this feature.



config APM_CPU_IDLE

	bool "Make CPU Idle calls when idle"

	help

	  Enable calls to APM CPU Idle/CPU Busy inside the kernel's idle loop.

	  On some machines, this can activate improved power savings, such as

	  a slowed CPU clock rate, when the machine is idle. These idle calls

	  are made after the idle loop has run for some length of time (e.g.,

	  333 mS). On some machines, this will cause a hang at boot time or

	  whenever the CPU becomes idle. (On machines with more than one CPU,

	  this option does nothing.)



config APM_DISPLAY_BLANK

	bool "Enable console blanking using APM"

	help

	  Enable console blanking using the APM. Some laptops can use this to

	  turn off the LCD backlight when the screen blanker of the Linux

	  virtual console blanks the screen. Note that this is only used by

	  the virtual console screen blanker, and won't turn off the backlight

	  when using the X Window system. This also doesn't have anything to

	  do with your VESA-compliant power-saving monitor. Further, this

	  option doesn't work for all laptops -- it might not turn off your

	  backlight at all, or it might print a lot of errors to the console,

	  especially if you are using gpm.



config APM_ALLOW_INTS

	bool "Allow interrupts during APM BIOS calls"

	help

	  Normally we disable external interrupts while we are making calls to

	  the APM BIOS as a measure to lessen the effects of a badly behaving

	  BIOS implementation.  The BIOS should reenable interrupts if it

	  needs to.  Unfortunately, some BIOSes do not -- especially those in

	  many of the newer IBM Thinkpads.  If you experience hangs when you

	  suspend, try setting this to Y.  Otherwise, say N.



config APM_REAL_MODE_POWER_OFF

	bool "Use real mode APM BIOS call to power off"

	help

	  Use real mode APM BIOS calls to switch off the computer. This is

	  a work-around for a number of buggy BIOSes. Switch this option on if

	  your computer crashes instead of powering off properly.



endif # APM



source "arch/x86/kernel/cpu/cpufreq/Kconfig"



source "drivers/cpuidle/Kconfig"



endmenu





menu "Bus options (PCI etc.)"



config PCI

	bool "PCI support" if !X86_VISWS

	depends on !X86_VOYAGER

	default y if X86_VISWS

	select ARCH_SUPPORTS_MSI if (X86_LOCAL_APIC && X86_IO_APIC)

	help

	  Find out whether you have a PCI motherboard. PCI is the name of a

	  bus system, i.e. the way the CPU talks to the other stuff inside

	  your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or

	  VESA. If you have PCI, say Y, otherwise N.



	  The PCI-HOWTO, available from

	  <http://www.tldp.org/docs.html#howto>, contains valuable

	  information about which PCI hardware does work under Linux and which

	  doesn't.



choice

	prompt "PCI access mode"

	depends on X86_32 && PCI && !X86_VISWS

	default PCI_GOANY

	---help---

	  On PCI systems, the BIOS can be used to detect the PCI devices and

	  determine their configuration. However, some old PCI motherboards

	  have BIOS bugs and may crash if this is done. Also, some embedded

	  PCI-based systems don't have any BIOS at all. Linux can also try to

	  detect the PCI hardware directly without using the BIOS.



	  With this option, you can specify how Linux should detect the

	  PCI devices. If you choose "BIOS", the BIOS will be used,

	  if you choose "Direct", the BIOS won't be used, and if you

	  choose "MMConfig", then PCI Express MMCONFIG will be used.

	  If you choose "Any", the kernel will try MMCONFIG, then the

	  direct access method and falls back to the BIOS if that doesn't

	  work. If unsure, go with the default, which is "Any".



config PCI_GOBIOS

	bool "BIOS"



config PCI_GOMMCONFIG

	bool "MMConfig"



config PCI_GODIRECT

	bool "Direct"



config PCI_GOANY

	bool "Any"



endchoice



config PCI_BIOS

	bool

	depends on X86_32 && !X86_VISWS && PCI && (PCI_GOBIOS || PCI_GOANY)

	default y



# x86-64 doesn't support PCI BIOS access from long mode so always go direct.

config PCI_DIRECT

	bool

	depends on PCI && (X86_64 || (PCI_GODIRECT || PCI_GOANY) || X86_VISWS)

	default y



config PCI_MMCONFIG

	bool

	depends on X86_32 && PCI && ACPI && (PCI_GOMMCONFIG || PCI_GOANY)

	default y



config PCI_DOMAINS

	bool

	depends on PCI

	default y



config PCI_MMCONFIG

	bool "Support mmconfig PCI config space access"

	depends on X86_64 && PCI && ACPI



config DMAR

	bool "Support for DMA Remapping Devices (EXPERIMENTAL)"

	depends on X86_64 && PCI_MSI && ACPI && EXPERIMENTAL

	help

	  DMA remapping (DMAR) devices support enables independent address

	  translations for Direct Memory Access (DMA) from devices.

	  These DMA remapping devices are reported via ACPI tables

	  and include PCI device scope covered by these DMA

	  remapping devices.



config DMAR_GFX_WA

	bool "Support for Graphics workaround"

	depends on DMAR

	default y

	help

	 Current Graphics drivers tend to use physical address

	 for DMA and avoid using DMA APIs. Setting this config

	 option permits the IOMMU driver to set a unity map for

	 all the OS-visible memory. Hence the driver can continue

	 to use physical addresses for DMA.



config DMAR_FLOPPY_WA

	bool

	depends on DMAR

	default y

	help

	 Floppy disk drivers are know to bypass DMA API calls

	 thereby failing to work when IOMMU is enabled. This

	 workaround will setup a 1:1 mapping for the first

	 16M to make floppy (an ISA device) work.



source "drivers/pci/pcie/Kconfig"



source "drivers/pci/Kconfig"



# x86_64 have no ISA slots, but do have ISA-style DMA.

config ISA_DMA_API

	bool

	default y



if X86_32



config ISA

	bool "ISA support"

	depends on !(X86_VOYAGER || X86_VISWS)

	help

	  Find out whether you have ISA slots on your motherboard.  ISA is the

	  name of a bus system, i.e. the way the CPU talks to the other stuff

	  inside your box.  Other bus systems are PCI, EISA, MicroChannel

	  (MCA) or VESA.  ISA is an older system, now being displaced by PCI;

	  newer boards don't support it.  If you have ISA, say Y, otherwise N.



config EISA

	bool "EISA support"

	depends on ISA

	---help---

	  The Extended Industry Standard Architecture (EISA) bus was

	  developed as an open alternative to the IBM MicroChannel bus.



	  The EISA bus provided some of the features of the IBM MicroChannel

	  bus while maintaining backward compatibility with cards made for

	  the older ISA bus.  The EISA bus saw limited use between 1988 and

	  1995 when it was made obsolete by the PCI bus.



	  Say Y here if you are building a kernel for an EISA-based machine.



	  Otherwise, say N.



source "drivers/eisa/Kconfig"



config MCA

	bool "MCA support" if !(X86_VISWS || X86_VOYAGER)

	default y if X86_VOYAGER

	help

	  MicroChannel Architecture is found in some IBM PS/2 machines and

	  laptops.  It is a bus system similar to PCI or ISA. See

	  <file:Documentation/mca.txt> (and especially the web page given

	  there) before attempting to build an MCA bus kernel.



source "drivers/mca/Kconfig"



config SCx200

	tristate "NatSemi SCx200 support"

	depends on !X86_VOYAGER

	help

	  This provides basic support for National Semiconductor's

	  (now AMD's) Geode processors.  The driver probes for the

	  PCI-IDs of several on-chip devices, so its a good dependency

	  for other scx200_* drivers.



	  If compiled as a module, the driver is named scx200.



config SCx200HR_TIMER

	tristate "NatSemi SCx200 27MHz High-Resolution Timer Support"

	depends on SCx200 && GENERIC_TIME

	default y

	help

	  This driver provides a clocksource built upon the on-chip

	  27MHz high-resolution timer.  Its also a workaround for

	  NSC Geode SC-1100's buggy TSC, which loses time when the

	  processor goes idle (as is done by the scheduler).  The

	  other workaround is idle=poll boot option.



config GEODE_MFGPT_TIMER

	bool "Geode Multi-Function General Purpose Timer (MFGPT) events"

	depends on MGEODE_LX && GENERIC_TIME && GENERIC_CLOCKEVENTS

	default y

	help

	  This driver provides a clock event source based on the MFGPT

	  timer(s) in the CS5535 and CS5536 companion chip for the geode.

	  MFGPTs have a better resolution and max interval than the

	  generic PIT, and are suitable for use as high-res timers.



config K8_NB

	def_bool y

	depends on AGP_AMD64



endif # X86_32



source "drivers/pcmcia/Kconfig"



source "drivers/pci/hotplug/Kconfig"



endmenu





menu "Executable file formats / Emulations"



source "fs/Kconfig.binfmt"



config IA32_EMULATION

	bool "IA32 Emulation"

	depends on X86_64

	help

	  Include code to run 32-bit programs under a 64-bit kernel. You should

	  likely turn this on, unless you're 100% sure that you don't have any

	  32-bit programs left.



config IA32_AOUT

       tristate "IA32 a.out support"

       depends on IA32_EMULATION

       help

         Support old a.out binaries in the 32bit emulation.



config COMPAT

	bool

	depends on IA32_EMULATION

	default y



config COMPAT_FOR_U64_ALIGNMENT

	def_bool COMPAT

	depends on X86_64



config SYSVIPC_COMPAT

	bool

	depends on X86_64 && COMPAT && SYSVIPC

	default y



endmenu





source "net/Kconfig"



source "drivers/Kconfig"



source "drivers/firmware/Kconfig"



source "fs/Kconfig"



source "kernel/Kconfig.instrumentation"



source "arch/x86/Kconfig.debug"



source "security/Kconfig"



source "crypto/Kconfig"



source "lib/Kconfig"

arch/x86/Kconfig.i386

+2 −324
Original line number Diff line number Diff line
@@ -517,8 +517,6 @@ config X86_CPUID 
	  with major 203 and minors 0 to 31 for /dev/cpu/0/cpuid to

	  /dev/cpu/31/cpuid.



source "drivers/firmware/Kconfig"



choice

	prompt "High Memory Support"

	default HIGHMEM4G if !X86_NUMAQ
@@ -957,328 +955,6 @@ config ARCH_ENABLE_MEMORY_HOTPLUG 
	def_bool y

	depends on HIGHMEM



menu "Power management options (ACPI, APM)"

	depends on !X86_VOYAGER



source kernel/power/Kconfig



source "drivers/acpi/Kconfig"



menuconfig APM

	tristate "APM (Advanced Power Management) BIOS support"

	depends on PM_SLEEP && !X86_VISWS

	---help---

	  APM is a BIOS specification for saving power using several different

	  techniques. This is mostly useful for battery powered laptops with

	  APM compliant BIOSes. If you say Y here, the system time will be

	  reset after a RESUME operation, the /proc/apm device will provide

	  battery status information, and user-space programs will receive

	  notification of APM "events" (e.g. battery status change).



	  If you select "Y" here, you can disable actual use of the APM

	  BIOS by passing the "apm=off" option to the kernel at boot time.



	  Note that the APM support is almost completely disabled for

	  machines with more than one CPU.



	  In order to use APM, you will need supporting software. For location

	  and more information, read <file:Documentation/pm.txt> and the

	  Battery Powered Linux mini-HOWTO, available from

	  <http://www.tldp.org/docs.html#howto>.



	  This driver does not spin down disk drives (see the hdparm(8)

	  manpage ("man 8 hdparm") for that), and it doesn't turn off

	  VESA-compliant "green" monitors.



	  This driver does not support the TI 4000M TravelMate and the ACER

	  486/DX4/75 because they don't have compliant BIOSes. Many "green"

	  desktop machines also don't have compliant BIOSes, and this driver

	  may cause those machines to panic during the boot phase.



	  Generally, if you don't have a battery in your machine, there isn't

	  much point in using this driver and you should say N. If you get

	  random kernel OOPSes or reboots that don't seem to be related to

	  anything, try disabling/enabling this option (or disabling/enabling

	  APM in your BIOS).



	  Some other things you should try when experiencing seemingly random,

	  "weird" problems:



	  1) make sure that you have enough swap space and that it is

	  enabled.

	  2) pass the "no-hlt" option to the kernel

	  3) switch on floating point emulation in the kernel and pass

	  the "no387" option to the kernel

	  4) pass the "floppy=nodma" option to the kernel

	  5) pass the "mem=4M" option to the kernel (thereby disabling

	  all but the first 4 MB of RAM)

	  6) make sure that the CPU is not over clocked.

	  7) read the sig11 FAQ at <http://www.bitwizard.nl/sig11/>

	  8) disable the cache from your BIOS settings

	  9) install a fan for the video card or exchange video RAM

	  10) install a better fan for the CPU

	  11) exchange RAM chips

	  12) exchange the motherboard.



	  To compile this driver as a module, choose M here: the

	  module will be called apm.



if APM



config APM_IGNORE_USER_SUSPEND

	bool "Ignore USER SUSPEND"

	help

	  This option will ignore USER SUSPEND requests. On machines with a

	  compliant APM BIOS, you want to say N. However, on the NEC Versa M

	  series notebooks, it is necessary to say Y because of a BIOS bug.



config APM_DO_ENABLE

	bool "Enable PM at boot time"

	---help---

	  Enable APM features at boot time. From page 36 of the APM BIOS

	  specification: "When disabled, the APM BIOS does not automatically

	  power manage devices, enter the Standby State, enter the Suspend

	  State, or take power saving steps in response to CPU Idle calls."

	  This driver will make CPU Idle calls when Linux is idle (unless this

	  feature is turned off -- see "Do CPU IDLE calls", below). This

	  should always save battery power, but more complicated APM features

	  will be dependent on your BIOS implementation. You may need to turn

	  this option off if your computer hangs at boot time when using APM

	  support, or if it beeps continuously instead of suspending. Turn

	  this off if you have a NEC UltraLite Versa 33/C or a Toshiba

	  T400CDT. This is off by default since most machines do fine without

	  this feature.



config APM_CPU_IDLE

	bool "Make CPU Idle calls when idle"

	help

	  Enable calls to APM CPU Idle/CPU Busy inside the kernel's idle loop.

	  On some machines, this can activate improved power savings, such as

	  a slowed CPU clock rate, when the machine is idle. These idle calls

	  are made after the idle loop has run for some length of time (e.g.,

	  333 mS). On some machines, this will cause a hang at boot time or

	  whenever the CPU becomes idle. (On machines with more than one CPU,

	  this option does nothing.)



config APM_DISPLAY_BLANK

	bool "Enable console blanking using APM"

	help

	  Enable console blanking using the APM. Some laptops can use this to

	  turn off the LCD backlight when the screen blanker of the Linux

	  virtual console blanks the screen. Note that this is only used by

	  the virtual console screen blanker, and won't turn off the backlight

	  when using the X Window system. This also doesn't have anything to

	  do with your VESA-compliant power-saving monitor. Further, this

	  option doesn't work for all laptops -- it might not turn off your

	  backlight at all, or it might print a lot of errors to the console,

	  especially if you are using gpm.



config APM_ALLOW_INTS

	bool "Allow interrupts during APM BIOS calls"

	help

	  Normally we disable external interrupts while we are making calls to

	  the APM BIOS as a measure to lessen the effects of a badly behaving

	  BIOS implementation.  The BIOS should reenable interrupts if it

	  needs to.  Unfortunately, some BIOSes do not -- especially those in

	  many of the newer IBM Thinkpads.  If you experience hangs when you

	  suspend, try setting this to Y.  Otherwise, say N.



config APM_REAL_MODE_POWER_OFF

	bool "Use real mode APM BIOS call to power off"

	help

	  Use real mode APM BIOS calls to switch off the computer. This is

	  a work-around for a number of buggy BIOSes. Switch this option on if

	  your computer crashes instead of powering off properly.



endif # APM



source "arch/x86/kernel/cpu/cpufreq/Kconfig"



source "drivers/cpuidle/Kconfig"



endmenu



menu "Bus options (PCI, PCMCIA, EISA, MCA, ISA)"



config PCI

	bool "PCI support" if !X86_VISWS

	depends on !X86_VOYAGER

	default y if X86_VISWS

	select ARCH_SUPPORTS_MSI if (X86_LOCAL_APIC && X86_IO_APIC)

	help

	  Find out whether you have a PCI motherboard. PCI is the name of a

	  bus system, i.e. the way the CPU talks to the other stuff inside

	  your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or

	  VESA. If you have PCI, say Y, otherwise N.



	  The PCI-HOWTO, available from

	  <http://www.tldp.org/docs.html#howto>, contains valuable

	  information about which PCI hardware does work under Linux and which

	  doesn't.



choice

	prompt "PCI access mode"

	depends on PCI && !X86_VISWS

	default PCI_GOANY

	---help---

	  On PCI systems, the BIOS can be used to detect the PCI devices and

	  determine their configuration. However, some old PCI motherboards

	  have BIOS bugs and may crash if this is done. Also, some embedded

	  PCI-based systems don't have any BIOS at all. Linux can also try to

	  detect the PCI hardware directly without using the BIOS.



	  With this option, you can specify how Linux should detect the

	  PCI devices. If you choose "BIOS", the BIOS will be used,

	  if you choose "Direct", the BIOS won't be used, and if you

	  choose "MMConfig", then PCI Express MMCONFIG will be used.

	  If you choose "Any", the kernel will try MMCONFIG, then the

	  direct access method and falls back to the BIOS if that doesn't

	  work. If unsure, go with the default, which is "Any".



config PCI_GOBIOS

	bool "BIOS"



config PCI_GOMMCONFIG

	bool "MMConfig"



config PCI_GODIRECT

	bool "Direct"



config PCI_GOANY

	bool "Any"



endchoice



config PCI_BIOS

	bool

	depends on !X86_VISWS && PCI && (PCI_GOBIOS || PCI_GOANY)

	default y



config PCI_DIRECT

	bool

 	depends on PCI && ((PCI_GODIRECT || PCI_GOANY) || X86_VISWS)

	default y



config PCI_MMCONFIG

	bool

	depends on PCI && ACPI && (PCI_GOMMCONFIG || PCI_GOANY)

	default y



config PCI_DOMAINS

	bool

	depends on PCI

	default y



source "drivers/pci/pcie/Kconfig"



source "drivers/pci/Kconfig"



config ISA_DMA_API

	bool

	default y



config ISA

	bool "ISA support"

	depends on !(X86_VOYAGER || X86_VISWS)

	help

	  Find out whether you have ISA slots on your motherboard.  ISA is the

	  name of a bus system, i.e. the way the CPU talks to the other stuff

	  inside your box.  Other bus systems are PCI, EISA, MicroChannel

	  (MCA) or VESA.  ISA is an older system, now being displaced by PCI;

	  newer boards don't support it.  If you have ISA, say Y, otherwise N.



config EISA

	bool "EISA support"

	depends on ISA

	---help---

	  The Extended Industry Standard Architecture (EISA) bus was

	  developed as an open alternative to the IBM MicroChannel bus.



	  The EISA bus provided some of the features of the IBM MicroChannel

	  bus while maintaining backward compatibility with cards made for

	  the older ISA bus.  The EISA bus saw limited use between 1988 and

	  1995 when it was made obsolete by the PCI bus.



	  Say Y here if you are building a kernel for an EISA-based machine.



	  Otherwise, say N.



source "drivers/eisa/Kconfig"



config MCA

	bool "MCA support" if !(X86_VISWS || X86_VOYAGER)

	default y if X86_VOYAGER

	help

	  MicroChannel Architecture is found in some IBM PS/2 machines and

	  laptops.  It is a bus system similar to PCI or ISA. See

	  <file:Documentation/mca.txt> (and especially the web page given

	  there) before attempting to build an MCA bus kernel.



source "drivers/mca/Kconfig"



config SCx200

	tristate "NatSemi SCx200 support"

	depends on !X86_VOYAGER

	help

	  This provides basic support for National Semiconductor's

	  (now AMD's) Geode processors.  The driver probes for the

	  PCI-IDs of several on-chip devices, so its a good dependency

	  for other scx200_* drivers.



	  If compiled as a module, the driver is named scx200.



config SCx200HR_TIMER

	tristate "NatSemi SCx200 27MHz High-Resolution Timer Support"

	depends on SCx200 && GENERIC_TIME

	default y

	help

	  This driver provides a clocksource built upon the on-chip

	  27MHz high-resolution timer.  Its also a workaround for

	  NSC Geode SC-1100's buggy TSC, which loses time when the

	  processor goes idle (as is done by the scheduler).  The

	  other workaround is idle=poll boot option.



config GEODE_MFGPT_TIMER

	bool "Geode Multi-Function General Purpose Timer (MFGPT) events"

	depends on MGEODE_LX && GENERIC_TIME && GENERIC_CLOCKEVENTS

	default y

	help

	  This driver provides a clock event source based on the MFGPT

	  timer(s) in the CS5535 and CS5536 companion chip for the geode.

	  MFGPTs have a better resolution and max interval than the

	  generic PIT, and are suitable for use as high-res timers.



config K8_NB

	def_bool y

	depends on AGP_AMD64



source "drivers/pcmcia/Kconfig"



source "drivers/pci/hotplug/Kconfig"



endmenu



menu "Executable file formats"



source "fs/Kconfig.binfmt"



endmenu



source "net/Kconfig"



source "drivers/Kconfig"



source "fs/Kconfig"



source "kernel/Kconfig.instrumentation"



source "arch/x86/Kconfig.debug"



source "security/Kconfig"



source "crypto/Kconfig"



source "lib/Kconfig"



#

# Use the generic interrupt handling code in kernel/irq/:
@@ -1319,3 +995,5 @@ config X86_TRAMPOLINE 
config KTIME_SCALAR

	bool

	default y



source "arch/x86/Kconfig"

arch/x86/Kconfig.x86_64

+1 −134

File changed.

Preview size limit exceeded, changes collapsed.

CRA Git | Maintained and supported by SUSTech CRA and CCSE